АЛЬФА-ПОЛИМЕР, ООО

WAGNER Sprint X - an innovative generation of equipment from the European leader in the premium segment , combining attractive design, improved functionality and high efficiency Powder Coating. The WAGNER Sprintx AF is a powerful powder coating machine that feeds it right out of the box. This equipment is recommended for frequent color changes. Philosophy WAGNER - taking care of the efficiency of investments of our partners, and this principle is at the heart of all ideas that are embodied in innovative engineering solutions: Energy efficiency - minimum energy consumption costs (40 W), which is 2 ÷ 3 times less, than competitors-classmates Unprecedented low cost of ownership - only WAGNER has thought out everything to the smallest detail: you do not need to constantly change an expensive electrode holder assembly (≈50 €) and carry high operating costs, just replace the protective wedge (1 €). Double click function on the PEM-X1 gun - provides instant changeover to other paint programs without re-setting the control unit and saves the most valuable resource - time. Versatility - Your new WA GNER Sprint X is two premium rigs in one! After all, only WAGNER allows you to work with a Tribo or Corona-gun - just connect the accessory you need. And with the tribo / corona switch module, you can operate two guns at the same time, just by switching the toggle switch

This is a modern device that allows you to quickly and efficiently apply powder paint. One of the key advantages of the model is the presence of a display that allows you to set the operating parameters as accurately as possible. A spray gun, a control unit, a transport trolley, a 40 liter tank, an injector, an oil moisture separator and a set of hoses are supplied with the device. the tank is made of high quality stainless steel; the unit is connected to a standard household network with a voltage of 220 V (+/- 10%) and a frequency of 50 Hz; Atlas-19 consumes no more than 30 W; the voltage at the corona electrode fluctuates within 10–100 kV, depending on the set parameters; the feed hopper holds 40 liters of powder; minimum inlet air pressure - 0.4 Mda; air consumption - 13 200 l / h; maximum inlet air pressure - 0.8 Mda; the mass of the fully assembled device does not exceed 40 kilograms; consumption powder - 265 g / min; the compressed air contains no more than 1.4 g / m3 of moisture, no more than 0.1 ppm of oil; the dyeing speed reaches 600 g / min; average inlet air pressure - 0.6 Mda; short-circuit current - 180 μA .