Industrieanlagen Großhandel auf Qoovee Market

Desktop vertical drilling machine 2N125L is designed for drilling, reaming, countersinking and countersinking holes. The design provides a standard Morse taper 3 for tool mounting. The drilling depth is limited by the movement of the spindle axis, but in some cases it can be increased by moving the quill. The control is carried out in manual mode and allows using various materials (metal, wood, plastic, etc.) as blanks. It is widely used in one-off and small-scale production. Benefits: Reliable and inexpensive workshop machine The spindle is mounted on high precision ball bearings High spindle rotation accuracy: radial runout less than 0.030mm Precision quick-change chuck included: radial runout of the clamped tool less than 0.080 mm Adjustable drilling depth stop Right / left direction of spindle rotation Comfortable, ergonomic handle for quill feeding High quality GATES timing belts eliminate slippage and power loss Smooth running thanks to brushed aluminum pulleys Quiet and efficient electric motor with aluminum housing and forced cooling Precise work table with diagonal T-slots Work table tilts ± 45 ° and rotates 360 ° Gear mechanism of vertical movement of the table Massive large-size base with longitudinal grooves and stiffeners Convenient IP54 control panel with separate emergency button Large protective screen with limit switch Belt guard limit switch Time-tested quality Characteristics Engine 550 watts Max. Drilling Ø 25 mm Max. Deep hole drilling 18 mm Spindle MK 3 Spindle axis overhang 190 mm Moving the quill 80 mm Spindle speed 210 - 2220 rpm Number of speeds 12 Table size 270 x 270 mm T-slot size 15 mm Maximum distance from spindle to table 780 mm Base size 500 x 300 mm Maximum distance from spindle to base 1220 mm Column diameter ø 70 mm dimensions 690 x 390 x 1570 mm Machine weight 60 Kg

Desktop vertical drilling machine 2N116L is designed for drilling, reaming, countersinking and countersinking holes. The design provides a standard Morse taper 2 for fastening the tool. The drilling depth is limited by the movement of the spindle axis, but in some cases it can be increased by moving the quill. The control is carried out in manual mode and allows using various materials (metal, wood, plastic, etc.) as blanks. It is widely used in one-off and small-scale production. Benefits: Reliable and inexpensive workshop machine The spindle is mounted on high precision ball bearings High spindle rotation accuracy: radial runout less than 0.030mm Precision quick-change chuck included: radial runout of the clamped tool less than 0.080 mm Adjustable drilling depth stop Comfortable, ergonomic handle for quill feeding High quality GATES timing belts eliminate slippage and power loss Smooth running thanks to brushed aluminum pulleys Quiet and efficient electric motor with aluminum housing and forced cooling Precise work table with diagonal T-slots Work table tilts ± 45 ° and rotates 360 ° Gear mechanism of vertical movement of the table Massive large-size base with longitudinal grooves and stiffeners Convenient IP54 control panel with separate emergency button Large protective screen with limit switch Belt guard limit switch Time-tested quality Characteristics Engine 450 watts Max. Drilling Ø 16 mm Max. Deep hole drilling 15 mm Spindle MK 2 Spindle axis overhang 125 mm Moving the quill 65 mm Spindle speed 660 - 2500 rpm Number of speeds five Table size 200 x 200 mm T-slot size 14 mm Maximum distance from spindle to table 390 mm Base size 160 x 170 mm Maximum distance from spindle to base 525 mm Column diameter ø 60 mm dimensions 510 x 270 x 820 mm Machine weight 36 kg

Desktop vertical drilling machine 2N114L is designed for drilling, reaming, countersinking and countersinking holes. The drilling depth is limited by the movement of the spindle axis, but in some cases it can be increased by moving the quill. The control is carried out in manual mode and allows using various materials (metal, wood, plastic, etc.) as blanks. It is widely used in one-off and small-scale production. Benefits: Reliable and inexpensive workshop machine The spindle is mounted on high precision ball bearings High spindle rotation accuracy: radial runout less than 0.030mm Precision quick-change chuck included: radial runout of the clamped tool less than 0.080 mm Adjustable drilling depth stop Comfortable, ergonomic handle for quill feeding High quality GATES timing belts eliminate slippage and power loss Smooth running thanks to brushed aluminum pulleys Quiet and efficient electric motor with aluminum housing and forced cooling Precise work table with diagonal T-slots Work table tilts ± 45 ° and rotates 360 ° Gear mechanism of vertical movement of the table Massive large-size base with longitudinal grooves and stiffeners Convenient IP54 control panel with separate emergency button Large protective screen with limit switch Belt guard limit switch Time-tested quality Characteristics Engine 350 watts Max. Drilling Ø 14 mm Max. Deep hole drilling 12 mm Spindle B16 Spindle axis overhang 104 mm Moving the quill 50 mm Spindle speed 520 - 2620 rpm Number of speeds five Table size 160 x 160 mm T-slot size 14 mm Maximum distance from spindle to table 330 mm Base size 140 x 180 mm Maximum distance from spindle to base 440 mm Column diameter ø 46 mm dimensions 420 x 230 x 700 mm Machine weight 21 kg

Vertical drilling machines belong to the second group of metal-cutting machines. The main components are: base plate, bed, table, motor, gearbox, spindle and feed mechanism. The ability to perform the following operations: Drilling (through, blind) Boring (countersinking, reaming) Threading Countersinking They are widely used in all branches of mechanical engineering from single piece to mass production. Versatility of the processed material: metal, wood, plastic, etc. Benefits: Reliable and inexpensive workshop machine The spindle is mounted on high precision ball bearings High spindle rotation accuracy: radial runout less than 0.030mm Drill chuck included Adjustable drilling depth stop Comfortable, ergonomic handle for quill feeding High quality GATES timing belts eliminate slippage and power loss Smooth running thanks to brushed aluminum pulleys Quiet and efficient forced-cooled electric motor Precise work table with diagonal T-slots Work table tilts ± 45 ° and rotates 360 ° Gear mechanism of vertical movement of the table Massive large-size base with longitudinal grooves and stiffeners Convenient IP54 control panel with separate emergency button Large protective screen with limit switch Belt guard limit switch Time-tested quality Characteristics Engine 300 watts Max. Drilling Ø 13 mm Max. Deep hole drilling 11 mm Spindle B16 Spindle axis overhang 104 mm Moving the quill 50 mm Spindle speed 520 - 2620 rpm Number of speeds five Table size 160 x 160 mm T-slot size 14 mm Maximum distance from spindle to table 240 mm Base size 135 x 175 mm Maximum distance from spindle to base 325 mm Column diameter ø 46 mm dimensions 420 x 220 x 580 mm Machine weight 19 kg

Accumulator battery Delta DTM 6045 Characteristics Dimensions Weight, kg: 0.78 Dimensions: 70x47x107 Dimensions (LxWxH): 70x47x107 Other capacity (Ah): 4.5 voltage (V): 6

Diesel power plant AD20 open on the frame, based on the RICARDO engine is designed to generate electricity as a backup (in some cases the main) power source in settlements, at construction sites , in shift camps, at drilling rigs, in the power systems of enterprises, educational institutions, medicine, in ensuring the functioning of banks, hotels, shopping, warehouse complexes, etc. All components are quality controlled using high-tech equipment. Full control of the production process and final quality control of products is provided by industry experts in accordance with Russian standards. All power plants are fully ready for operation after commissioning, complete with a silencer, battery, filled with oil and coolant. Each 20 kW diesel power plant manufactured by MOTOR has undergone a 2-hour run-in under conditions as close as possible to real operation. Compliance with standards: 20 kW power plant has a certificate of conformity: conformity with GOST R 53174-2008, GOST R 51318.12-99 (CISPR 12-97), GOST 12.1. 012-2004, GOST 12.1.003-83 Basic configuration (for a 20 kW generator the price is calculated based on the basic configuration) : < / strong> 1) Complete diesel engine ( RICARDO ), equipped with direct fuel injection, water-air cooling and speed governor; 2) Generator 20 kW ( 20 kW alternator ) single-support brushless, synchronous, four-pole with feedback diodes, with self-excitation and automatic voltage regulator; 3) Frame with installed fuel tank. The fuel tank is equipped with a drain cock and a lockable fuel filler neck. The structure of the frame allows for rigging work with a car-loader, manipulator, or using a crane-beam; 4) Power supply system with batteries, generator, starting starter; 5) Control cabinet with automatic or manual start (depending on the degree automation); Additional equipment (affects the 20 kW power plant cost ) : - Electric preheater of coolant from the 220 V mains - Electric pre-heater for oil from the 220 V mains - Pre-starting diesel heater of cooling liquid PZhD, - External fuel tank - Execution on a one- or two-axle trailer or on a car chassis, - Execution in the insulated block-container "North", with the complete set of the block-container with equipment and systems necessary to ensure the safety, operation and maintenance of the diesel generator set (the complete set and execution of the block-container is agreed upon additionally),

The VersaUV LEF printer applies text, photographs, logos and other subjects by direct printing onto objects up to 10 cm thick: gadgets, gift items, prototypes, industrial blanks, electronic devices. The LEF printer will quickly transform familiar objects into unique, personalized products - at a favorable cost price. The range of compatible materials is almost endless: PET, ABS, polycarbonate, TPU, leather, textiles, etc. ECO-UV ink ECO-UV ink provides high print density with a wide color gamut. The composition dries instantly, forming a flexible paint film that does not crack when the material is bent and stretched. Delivery form - 220 ml cartridges: CMYK + white + glossy varnish. Roland DG recommends an air filtration system for this ink. Basic and Industrial Models The LEF-20 industrial printer is larger and faster than the LEF-12. The printable area for it is 508 x 308 mm, which is double that of the base model. The new LED moving source further improves printer productivity: print speeds for CMYK, white and transparent inks are significantly faster. Special colors The LEF series printers work with CMYK inks as well as white and transparent formulations. White ink provides high quality prints on colored and transparent objects. It can be used as an opaque opaque base that enhances the brightness of other colors. Clear ink designed for matte, glossy and embossed effects. Simplicity and energy efficiency The LEF printer is simple from operation, does not require heating or cooling between orders. The built-in LED source features an extremely long service life with low power consumption. A protective cover and screen prevent dust from entering the product during printing.

Use the VersaUV LEF-12 to print text, photographs, logos, or other design projects directly onto objects up to 10 cm thick. Examples of such objects are gadgets, merchandise, and prototypes. The LEF-12 is a desktop UV printer that uses CMYK color profile, white ink and varnish. Use varnish for a glossy or matte finish and for textures. Built-in LED lamps ensure fast ink drying. Personalize items LEF-12 is a LED UV printer that prints on objects with a maximum height of 10 cm. The machine is equipped with a flat table , on which you can place the printed materials using a special frame and an adhesive sheet. The table automatically adjusts to the height of the subject, allowing you to print on uneven objects. Instant dry ink The LEF-12 printer uses Roland DG's Eco-UV ink. The ink is available in four colors: CMYK, white and varnish. White ink provides superior printing on colored and transparent objects. You can also use this ink as a base for vibrant colors. Transparent ink allows for special effects including matte or glossy surfaces and textures. Software included LEF-12 printer comes with Versa Works, RIP software from Roland DG. The software supports two printing modes. Standard print mode is ideal for printing fine details. The remote mode has been specially designed for printing on embossed objects.

Environmentally friendly Environmentally friendly emitting LEDs with long lifespan and low energy consumption Environmentally friendly printing that produces almost no organic vapor A2 size and thickness 150mm Width 610mm Printable on A2 materials Large width increases print speed by 1.3 times Maximum material thickness 150mm High print quality < br> 50% improved print accuracy Minimum drop size 4 pkL Maximum print resolution 1800 x 1800 dpi Stunning and accurate image quality Easy maintenance Multiple maintenance systems Clogged Nozzle Replacement System White Ink Circulation System Ink Mist Absorbing Fan Improved Print Quality Reduced Ink Mist, which will be generated when printing on bulky workpieces Simultaneous Printing in 2 layers Not available print using 6-color scheme Reverse printing Print CMYK on White or White on CMYK without loss of speed Available with ink configuration 4 colors + white

Mimaki has developed an updated version of the UJF-3042MkII UV printer with higher productivity, higher accuracy and improved print quality to meet the needs of the dynamic advertising market worldwide. The new line of printers boasts 20 % increased print speed, increased maximum thickness (height) of printed products (up to 153 mm), improved print quality using variable drop technology.

The UJF-3042FX provides an opportunity to enter new promising markets with a large volume of proposals. Compact design saves space. Low cost (UV LEDs can be included in the annual service). Easy installation and operation Printer power supply - 220 V (1.5 A) Printheads with variable drop technology, allow you to get excellent quality images with a maximum resolution of 1440x1200 dpi. Maximum print size 300 x 420 mm. Maximum material thickness up to 50 mm (UJF-3042FX). Print on more materials, including heat-sensitive materials. High productivity / fast installation; no time for ink drying, instant on and off the printer. Low power consumption (less than 0.5 kW). Long life of UV LEDs (5 times longer than conventional UV lamps) White ink for printing on transparent or colored surfaces Varnish for the final gloss. Vacuum system for fixing the material

GCC launches solid state fiber laser engraving machines with flatbed laser engraving machines. The engraving machine represents a fundamentally new type of engraving equipment, which is designed for marking metal products such as stainless steel, copper, aluminum, titanium, zinc, iron, and silver. The original idea led to the creation of a laser complex that surpasses traditional markers on scanning optics. The productivity of such lasers increases several times in the manufacture of large batches of products. New professional equipment is replacing solid-state lasers on scanners with a small working field. The S290 solid-state laser engraver is based on the well-known Spirit model, and combines the quality and reliability of mechanics and electronics, combined with the latest emitter based on a solid-state ytterbium fiber laser. Thanks to this emitter, laser machines allow you to make color engraving on stainless steel. A large working area makes it possible to install a batch of products, which allows you to significantly increase the productivity of the machine, by reducing the time that is spent on installing each product.

Stellar Mark IF series is a new laser marker from GCC based on ultra-durable fiber laser emitter SPI Lasers (UK). Designed for surface marking, deep engraving and even cutting metals and alloys up to 0.5mm thick. Thanks to the fine adjustment of the power, it is possible to color-code stainless steel. The Stellar Mark IF-20 is a compact desktop laser system that provides reliable, trouble-free operation with virtually no maintenance. The undoubted advantage of this laser complex is the low power consumption of the installation. The new type of laser source will make it possible to do without water cooling, which will significantly save the enterprise. The complex is controlled from the graphic package G-Soft Library. Here you can not only send files for execution by setting laser marker parameters, it is also a full-fledged vector editor, similar to CorelDraw. You can work with lines, regular and graphic text, objects, fill and so on. You can scale objects, move them, copy and combine. Additional programs are built in here, such as sequential numbering, barcode and barcode. In a word, there is everything you need here, whether it is an advertising and production or a souvenir workshop, or it will be an industrial enterprise with its own range of specific tasks. A wide range of metals and alloys can be processed, including steel, titanium, silver, gold, brass, copper, aluminum, painted metals, anodized aluminum, Alumamark, plastics, rubber, semiconductors, silicon wafers, some types of precious and ornamental stones, security films for Tesa and 3M lasers. The laser marker can successfully work in such areas as: Jewelry Engraving of advertising and souvenir products Engraving mobile phones and accessories Marking of tools, bearings, machine parts, mechanisms Automotive industry - security markings, dashboard decoration, marking of car parts Labeling of medical instruments and devices Labeling of microcircuits, processors, printed circuit boards, parts, manufacturing of warranty stickers

The device allows engraving on the outside of an object with its rotation 360 degrees around its axis. In the control driver, it is enough to specify the diameter and offset from the edge of the object. Convenient and fast fastening of the object of rotation in the clamp. Rubber gaskets allow working with glass and ceramics. Maximum object diameter 170 mm, length 450 mm. Weight limit 7 kg.

A convenient device designed for high-quality through-cutting of sheet materials: double-layer plastics, acrylic, paper, and other sheet materials. The table is made of molded aluminum foil. Since aluminum is highly reflective, the laser beam is reflected and deflected when it hits it. When processing, the material, being on such a table, is, as it were, in the air, the materials are perfectly cut and do not burn from below. The table is not suitable for cutting small parts.

Experience the power of the GCC LaserPro X Series, designed and engineered specifically for professional use. Thanks to quality equipment and high wear resistance, the GCC LaserPro X500III achieves high productivity. Model X500III combines the functions of both a laser cutter and an engraver. Professional cutting laser complex GCC with a working field of 1300 x 916 mm, made on the basis of the Gaia model, equipped with a glass laser emitter Reci 80, 100,130 or 150W, or 100W water-cooled GSI emitter. Inexpensive and reliable complex for laser cutting acrylic, plastic, plywood, wood, leather, paper and rubber.

The new cutting laser complex GCC with a working field of 635x458 mm, made on the basis of the Mercury model, is equipped with a Reci 80 and 100 W glass laser emitter with water cooling. Inexpensive and reliable complex for laser cutting of acrylic, plastic, wood, leather, paper and rubber. X252 is a medium format laser cutter suitable for processing both small and medium format products, while simultaneously achieving high productivity ... Ideal for simple laser cutting tasks. It should be noted that power, size of the working area and speed only affect productivity, while the cut quality remains consistently high.

A new generation of Spirit laser engraver, which has become the best-selling machine in Russia and in the world. Spirit LS not only retained all the best technical solutions that were used on the previous model, but also received the latest mechanical system and safety key. This model is the embodiment of quality, reliability and technical progress. The latest generation Spirit LS laser system continues the most successful Spirit series of laser engravers. The machine has a number of unique technical solutions, patented technologies and differs from all existing laser engravers. High-precision linear guides with a closed plain bearing allow engraving at speeds up to 2 m / s, while the engraving quality is even higher than on machines with a classical mechanical system, in which a carriage with rollers moves along a rail. The system is protected from dust and combustion products entering it, which significantly extends its service life. The security key will prevent you from using the machine without your knowledge. The working area of ​​740x460 mm makes this machine ideal for cutting and engraving. Spirit LS is the epitome of quality, reliability and the best interface available today. It's safe to say - Spirit LS sets new quality standards in modern laser engraving.

Самая продаваемая, на сегодняшний день, лазерная машина в России. Модель является оптимальной, и наиболее эффективной для резки и гравировки различных материалов. Улучшенный эргономичный дизайн, удобство в эксплуатации и техническом обслуживании машины, надежность и высокая производительность – все эти качества делают Spirit лидером продаж на Российском рынке лазерных граверов.Лазерная гравировальная машина Spirit является самой успешной разработкой компании GCC за последнее десятилетие. Машина за 2 года стала самой продаваемой в мире в своем классе. Революционные решения в дизайне сделали этот станок не только эстетически красивым, но и функционально удобным. Станок также имеет целый ряд инновационных технологических решений, которые позволяют сделать работу более простой, удобной и производительной. Такие решения, как съемный датчик автофокусировки, который способен предотвратить ошибку оператора, откидывающаяся верхняя крышка, позволяющая провести техническое обслуживание быстро и удобно за счет доступа ко всем механическим и оптическим элементам на рабочем столе, возможность перемещения каретки руками, отсек под рабочим столом, в который можно поместить компрессор, подсветка рабочего поля светодиодными линейками и многое другое. Все эти технологии не применялись ранее на других лазерных граверах и запатентованы компанией GCC. За счет оптимального рабочего поля 740x460 мм лазерный гравер Spirit является универсальным как для резки, так и для гравировки.

The Mercury series of laser engravers has been sold on the market for over 10 years and is the most common laser machine in Russia. The Mercury III is an updated version of this series. The machine implements new topical solutions related to safety and access to equipment. The security key will protect the engraver from unwanted use and thus prevent unauthorized access to the machine. The emergency button will help the operator of the laser machine to interrupt the operation of the machine in an emergency. Mercury III is an easy-to-use multifunctional laser system that successfully operates in many advertising, souvenir and printing companies in our country, in industries that produce seals and stamps. A versatile working field (640x460 mm), a reliable laser emitter, and optimal cutting and engraving characteristics position the Mercury III as an ideal tool for a wide range of tasks.

C180II is a continuation of the popular series of desktop laser engravers. The working field 458x305 mm in combination with the engraving speed of 1 m / s and the possibility of expanding the depth of movement (increasing the distance along the z-coordinate) from 100 to 150 mm allows the most effective engraving of various range of products. This is a versatile laser engraver designed for small industries for the production of seals and stamps, model, advertising and souvenir workshops. Small dimensions allow installing the machine in small rooms. Ideal for points of sale, quick engraving of products. Possibility to install an engraving device on cylindrical objects, allowing you to get all the benefits of large floor-standing laser systems.

LaserPro Venus II is a desktop laser engraver, which today is considered to be the most compact and inexpensive in the professional series of GCC's Synrad metal emitter laser engravers. The equipment is ideal for use in stamp workshops that make stamps and seals. It is also suitable for installation in small advertising and production companies that are engaged in the engraving of souvenir products (pens, key rings, business card holders, number plates, plates, badges, etc.) It should be noted that the power, size of the working area and speed affects only productivity ... At the same time, the quality of engraving and cutting remains invariably high.

Reducing sleeves for planetary gear inner coupling. Allows the planetary gearbox to be installed on motors with different shaft diameters.

Industrial connectors with locking (cable mounting) are intended for use in CNC machines and automation systems, including for connecting spindles and servo motors. The connectors provide reliable electrical connections. The connectors are mechanically locked to prevent disconnection.

The PLZ026 module is designed to adjust the power (~ 220V, up to 2 kW) in the load. Two methods of power adjustment - FIM or skipping periods. Designed to adjust power both in resistive loads (heating elements, incandescent lamp) and reactive loads (electric motors). A simistor is used as a control element. Voltage control 0 ... 10V, built-in potentiometer or PWM. Galvanic isolation of control circuits.

Characteristic \ Model 3204/06/08HA 3204 / 06FA Print width up to 3.2 meters < tr> Resolution up to 720 dpi Printhead type Seiko SPT 510 / 35pl (IRH1513D), Seiko SPT 510 / 50pl (IRH1513U) Seiko SPT 1020 / 35pl (IRH2526Q or IRH2536Q) Number of heads 4/6 8 4/6 Ink Configuration CMYK - CMYKLcLm Ink solvent Print speed in modes Draft 2 pass 360 dpi - 52 m 2 / h 2 pass 360 dpi - 104 m 2 / h 1 pass 240 dpi - 104 m 2 / h < / tr> High Speed ​​ 3 pass 360 dpi - 34 m 2 / h 3 pass 360 dpi - 68 m 2 / h 2 pass 240 dpi - 86 m 2 / h Standard 4 pass 360 dpi - 26 m 2 / h 4 pass 360 dpi - 52 m 2 / h 3 pass 240 dpi - 53 m 2 / h < / td> High quality 6 pass 360 dpi - 17 m 2 / h 6 pass 360 dpi - 34 m 2 / h 4 pass 240 dpi - 43 m 2 / h Specifications RIP Tool UltraPrint (PhotoPrint is optional) Control workstation - PC PC operating system Windows 7/8, 32 & 64 bit < / tr> Interface USB 2.0 Materials for printing paper, banner, film and other surfaces prepared for solvent printing Printhead cleaning automatic separate (for each color channel) Material warming up system three-zone four-zone Print Drying System blower fan blower fan, infrared heating Power supply 50/60 Hz, 220 ± 5% V, ≥3000 VA Operating conditions Temperature 18 - 25 C o Humidity 40-70% non-condensing Dimensions Package dimensions 4.50 x 0.90 x 0.80 m Equipment dimensions 4.40 x 0.80 x 1.2 0 m Gross / net weight 450/340 kg Basic equipment: Automatic channel-by-channel system head cleaning. Automatic unwinding-feeding system. Three-zone material warming up system. Fan system for blowing the print. Vacuum media pressure. RIP UltraPrint software. Automatic system for one-channel head cleaning. Automatic material unwinding and feeding system. Four-zone material heating system (additional 4th heating table). Infrared heating system and fan blowing of the print. < li> Vacuum hold-down of the media. Rubberized media support / feed rollers. LED illumination of the print area. RIP UltraPrint software. < / ol> Additional equipment: Additional fourth material warming table. Infrared heating and fan blowing system. Automatic material take-up and take-up system. Rubberized support / feed rollers. LED printing area. RIP PhotoPrint software. Automatic system material receiving-rewinding. RIP PhotoPrint software. < / td>

This is a modern device that allows you to quickly and efficiently apply powder paint. One of the key advantages of the model is the presence of a display that allows you to set the operating parameters as accurately as possible. A spray gun, a control unit, a transport trolley, a 40 liter tank, an injector, an oil moisture separator and a set of hoses are supplied with the device. the tank is made of high quality stainless steel; the unit is connected to a standard household network with a voltage of 220 V (+/- 10%) and a frequency of 50 Hz; Atlas-19 consumes no more than 30 W; the voltage at the corona electrode fluctuates within 10–100 kV, depending on the set parameters; the feed hopper holds 40 liters of powder; minimum inlet air pressure - 0.4 Mda; air consumption - 13 200 l / h; maximum inlet air pressure - 0.8 Mda; the mass of the fully assembled device does not exceed 40 kilograms; consumption powder - 265 g / min; the compressed air contains no more than 1.4 g / m3 of moisture, no more than 0.1 ppm of oil; the dyeing speed reaches 600 g / min; average inlet air pressure - 0.6 Mda; short-circuit current - 180 μA .

Main characteristics: Brand: GP Model: AD 30S-T400 Main power: 30 kW / 37.5 kVA Standby power: 33 kW / 41.25 kVA Output voltage: 230 / 400V, 50Hz Fuel tank capacity (open version): 80 l Weight (open): 800 kg Fuel consumption (load 75): 6.8 l / h Fuel tank volume (casing): 80 l Dimensions (open version): 1750x820x1480 mm Dimensions (casing): 2000x1000x1800 mm Weight (casing): 1050 kg Alternator ( alternator): Model: GS GS 30-400 Generator type: three-phase Engine: Brand: Ricardo Model: R4100ZD Country of origin: China Cooling: air Number of cylinders: 4 Speed: 1500 rpm Displacement: 3.61 l Speed ​​governor: mechanical

The flaw detector is designed to detect cracks, porosity, inadmissible thinning and other violations of the continuity of internal and external protective dielectric coatings (paint, powder, film, bitumen and other dielectric coatings up to 1 mm thick) on metal products by applying a pulsed high-voltage voltage and fixing an electric breakdown in places of discontinuity or inadmissible thinning Features: the ability to control coatings with a thickness of 40 microns to 1 mm; completing with specialized rubber electrodes for paint and varnish coatings; digital indication of the voltage on the electrode; high stability of the voltage on the electrode; the ability to adjust the sensitivity; the ability to quickly replace battery; external battery charging; high operational safety due to pulsed operation; a large set of replaceable electrodes for control of products for various purposes; small dimensions and weight; the ability to control coatings on concrete structures ..

The VA47-100 circuit breakers are designed to protect distribution and group circuits with active and inductive loads. They are recommended for use in input distribution devices of household and industrial electrical installations. 80 standard versions for 10 rated currents.

Instrument transformer - an electrical transformer for monitoring the voltage, current or phase of the primary circuit signal. The instrument transformer is sized so as to have minimal effect on the measured (primary) circuit; to minimize distortion of the proportion and phase of the measured signal in the measuring (secondary) circuit.

Small-sized semi-automatic extrusion line EL PETF-15PM, designed for direct processing of recycled PET flakes and making of them monofilament used in the production of synthetic brooms and brush disks of sweeping machines. Key points: Pile profile (in the star section) allows you to save up to 20% of raw materials in the product. Twisting ensures the straightness of the pile. Used raw material - PET flakes. The length of the line is 10 meters. Line weight - 1000 kg. Power consumption - 15 kW. Small amount of technical waste when starting the line. Service staff 1 person, operator - packer. The line consists of individual nodes and is transported to GAZelles. When installing on site, it will be necessary to level the line units and connect the power cable connectors, the last set parameters are saved when the power supply is disconnected. Fast restructuring of parameters for a pile of a different profile and section. Training, consultations, comprehensive assistance are free for our clients. Equipment warranty 1 year. Structural know-how has been implemented in the extrusion line units The complete extrusion line includes: extruder, raw material dryer, cooling system, stabilization unit, 1st broaching unit, twisting unit, unit 2 -th broach, high-speed cutting unit, receiving hopper for monofilament. For processing technical waste, it is additionally equipped with a monofilament crusher. Specifications. Line length: 10 m. Line weight: 1000 kg. Power consumption: 15 kW. Productivity: 15 kg. / h. Monofilament type: oriented (stretched). Monofilament thickness adjustment: from 1.5 to 3.5 mm. Monofilament cutting length adjustment: from 200 to 700 mm. Monofilament cross-section: star, oval.

The price is indicated including VAT The square is intended for additional equipment of tables of welding and assembly models SSM. Complete with nut GS-01 is a mounting element for assembly equipment, allows you to set parts at an angle of 90 ° relative to each other on four sides of the square. The product is equipped with two pins for positioning the square at an angle of 15º, 30º, 45º relative to the table slots. Specifications: Parameter Value Overall dimensions (mm) 155x155x100 Weight (kg) 5,0

Electric industrial drying cabinet (chamber) DION MAXI + • Drying 24 pairs of shoes. • Maximum ease of assembly. • Polymer painted steel, thickness 1- 2 mm used in the production of DION-MAXI + gives the cabinet structure rigidity and strength, and the likelihood of transformations during transportation is minimized. • Heating system with proportional-integral-derivative control contributes to uniform heating of the cabinet to the recommended temperature (42˚С) and its maintenance during the entire specified drying time.