GidroStroyKomplekt

Hydrophobizing compound for imparting water-repellent properties to porous building materials. To protect facades, lime and cement plasters from atmospheric moisture and capillary suction. Purpose Crystallisol Hydrophobizator: It is used for processing porous building materials: concrete, brick, gypsum, wood, plaster. The walls of the pores and all particles of the material in contact with the water repellent are enveloped in an invisible thinnest water-repellent film. The processed material loses its ability to be wetted with water and to absorb it capillary. When the composition is applied to the surface, a thin layer of polymer is formed on the pore walls, which is not wetted with water and does not allow water to penetrate into the pores. Crystallisol Hydrophobizator leaves the pores open, and the vapor permeability of building materials remains almost at the original level. Due to the device of a hydrophobic barrier, the material acquires water-repellent properties that persist for a long time, increasing its resistance to pollution and mold damage. When processing the facade, it is recommended to carefully apply the material to the surface, avoiding contact with glass, plastic window frames and other parts of the structure that do not require processing. Before applying, cover such places with paper, construction tape. Description Crystallisol Hydrophobizator: An aqueous solution based on methylsiliconates, which, penetrating into the pores of the structure, protect it from capillary inflow of water by changing the contact angle of the surface wetting. Properties Crystallisol Hydrophobizator: Possesses high chemical resistance and resistance to weathering. Does not form a surface layer. Does not prevent moisture evaporation from the material. Gives water and dirt repellent properties to materials. Retains the color and texture of the surface. Fireproof. Carry out work in dry weather at a temperature of at least + 5 ° C. Material consumption: 1 liter of concentrate - 155 m² of surface. Packing: polyethylene canister 1 l.

Complex for chemical milling of concrete and enhancing the adhesion of waterproofing coatings and self-leveling floors with a concrete surface. Purpose of Crystallisol CHIMFREZ / ACTIVE: Chemical milling of concrete surfaces (removal of the cement film) without destroying the cement stone, opening the pores of concrete and increasing the adhesion strength with monolithic concrete, with self-leveling floors, with tile adhesive, with cement, gypsum , magnesia screeds and plasters, with cement-based waterproofing materials, with interior and exterior cladding made of natural and artificial stone. Crystallisol CHIMFREZ dissolves the cement film and opens the pores of the concrete, Crystallisol ACTIVE adhesively activates the cleaned surface and increases the adhesion strength of the new layer with the previously laid one. They are used only in a complex: first, the concrete surface is treated with Crystallisol HIMFREZ, one hour later - with Crystallisol ACTIVE. Properties Kristallizol CHIMFREZ / ACTIVE: Effective for working on concrete grade up to M300. Replaces / complements mechanical and machine hydro-blasting of concrete surfaces. Eliminates "cold seams" in monolithic construction. Apply by brush or roller. The work is carried out at an ambient temperature of + 5 ° C. The compositions are fireproof. They are odorless. They do not have a harmful effect on humans and the environment. Does not contain hydrochloric, acetic, citric, orthophosphoric acids and substances that destroy concrete. Material consumption: 0.1 - 0.3 l / m² (depending on the condition of the surface). Packing: plastic cans 10 l.

Fast-hardening compound for the elimination of local active leaks. Setting time from 30 seconds to 3 minutes. Purpose Kristallizol GIDROPLOMBA: To protect concrete, reinforced concrete, stone and brick structures from water penetration and exposure to aggressive media. It is used to eliminate pressure leaks through cracks, seams, technological holes in structures. Ambient temperature during application from + 5 ° C. Properties of Crystallisol GIDROPLOMBA: Composition hardening time from 30 seconds to 3 minutes. High water-stopping properties. Resistant to aggressive environments. Breathable. Environmentally friendly, non-toxic. Fireproof. Material consumption: 2 kg / dm³ (a ball with a diameter of 9-10 cm is obtained from 400 grams). Packaging: 2 kg bucket.

Complex additive in concrete solution to increase concrete water resistance. Purpose of Crystallisol MONOLIT: It is recommended to use Crystallisol Monolit as a complex waterproofing additive in a concrete solution at the stage of construction of hydraulic structures, civil and industrial construction, tunnels, overpasses, bridges, when installing concrete screeds, etc. The grade of concrete to which it is planned to add Crystallisol Monolith as an additive to increase its water resistance must be at least M150. Properties of Crystallisol MONOLITH: Increases the strength and density of concrete. Increases the water resistance of concrete. Increases the frost resistance of concrete. Does not reduce the protective properties of concrete in relation to reinforcement. Compatible with plasticizing and anti-freeze additives. Resistant to aggressive environments. Environmentally friendly, non-toxic. Material consumption: 1% by weight of cement. Packaging: 15 kg bucket.

One-component flexible waterproofing sealant for all types of surfaces. Purpose of Crystallisol Elast: To create a thin (2-4 mm) waterproof layer applied both outside and inside structures subject to dynamic loads. With a layer thickness of 2 mm, it is capable of bridging cracks over 0.9 mm, the elongation at break is about 10%. It is used for work in tanks with drinking water without limiting the dimensions of the structure. The final layer resembles an elastic rubber and has high adhesion to all possible surfaces. The treated surface, due to its high adhesion, does not flake off and is able to withstand significant mechanical stress. With a layer thickness of 4 mm, after 7 days of normal hardening, water resistance is achieved at the level of W14 at water pressure "on the hold-down" and W8 at the "pull-off" pressure. Description Crystallisol Elast: Crystallisol Elast is a dry mixture of Portland cement, calibrated quartz sand and chemically active additives. Application thickness for 1 pass up to 4 mm. Ready time - 3 days. Properties of Crystallisol Elast: Waterproof at hydrodynamic pressure up to W14. Low shrinkage deformations. High curing rates. High fracture toughness. Resistant to aggressive media, acid-alkali-resistant. Works on all types of substrates, including metal ones. Environmentally friendly, non-toxic. It is applied both from the inside and from the outside of the structure. Closed with tap water at room temperature. It is applied with a spatula or brush. Material consumption: 3 kg / m² with a layer thickness of 2 mm. Packaging: 25 kg bag.

Repair and restoration plaster waterproofing material of penetrating action. For repair, restoration and waterproofing of old concrete and destroyed brickwork, as well as for leveling the surface. Purpose Kristallizol Repair: For the repair of concrete and brick destroyed structures in order to ensure water tightness, increase strength and frost resistance. Restoration and leveling of destroyed areas on concrete and brick, waterproofing plaster surface coating. Description Crystallisol Repair: Crystallisol Repair is a mixture of Portland cement, calibrated quartz sand and chemically active additives. Properties Crystallisol Repair: Waterproof under hydrostatic pressure W8. It is used for work on old, destroyed concrete and brick structures. Forms a waterproof armored layer. It is applied both from the inside and from the outside of the structure. Increases frost resistance and structural strength. Resistant to aggressive environments. Environmentally friendly, non-toxic. Closed with tap water at room temperature. It is applied on a surface saturated with moisture. Material consumption: 1.3 - 1.5 kg / m² with a layer thickness of 1 mm (depending on the surface condition). To achieve a waterproofing of 8 atmospheres, a layer of 10 mm is required. Packaging: 25 kg bag.

Non-shrinking joint waterproofing material of penetrating action. It is used to eliminate water filtration through abutment joints, cracks, chips of concrete and brick structures. Purpose Crystallisol Suture: For internal and external waterproofing of joints in underground and buried structures: horizontal and vertical joints of concrete and brick structures, seams of foundation blocks, brickwork, "cold joints", etc. Description Crystallisol Suture: Crystallisol Suture is a mixture of Portland cement, calibrated quartz sand and chemically active additives. Properties Crystallisol Suture: Waterproof under hydrostatic pressure W8. It is used for work on both old and new concrete and brick structures. Resistant to aggressive environments. Non-shrinking, does not require additional maintenance. Increases the frost resistance of the structure. Environmentally friendly, non-toxic. Closed with tap water at room temperature. It is applied on a surface saturated with moisture. It is applied both from the inside and from the outside of the structure. Material consumption: 0.9 - 1 kg / lm (with a groove section of 20x20mm). Packaging: 25 kg bag, 15 kg bucket

Penetrating waterproofing material for work on new concrete surfaces in the absence of groundwater filtration at the time of work. Apply with a brush. Purpose of Crystallisol W12 Kistevoy: For internal and external waterproofing of concrete structures in underground and buried structures operating under conditions of constant or variable exposure to the aquatic environment: foundations and basements located below the groundwater level, water reservoirs, hydraulic structures, overpasses, pools, etc. It is applied to the surface in the absence of strong water filtration at the time of work. Not used for brickwork. Description Crystallisol W12 Kistevoy: For internal and external waterproofing of concrete structures in underground and buried structures operating under conditions of constant or variable exposure to the aquatic environment: foundations and basements located below the groundwater level, water reservoirs, hydraulic structures, overpasses, pools, etc. It is applied to the surface in the absence of strong water filtration at the time of work. Not used for brickwork. Properties Crystallisol W12 Hand: Waterproof under hydrostatic pressure W12. It is used for work on new concrete structures. Increases frost resistance. Resistant to aggressive environments. Environmentally friendly, non-toxic. It is applied both from the inside and from the outside of the structure. Closed with tap water at room temperature. It is applied with a brush on a surface saturated with moisture. Material consumption: 0.8 - 1 kg / m² (depending on the condition of the surface). Packaging: 25 kg bag, 15 kg bucket.

Water-stopping waterproofing material of penetrating action. For work on concrete and brick surfaces with strong filtration of groundwater. Purpose of Crystallisol W12: For internal and external waterproofing of concrete, stone and brick structures in underground and buried structures operating under conditions of constant or variable exposure to the aquatic environment: foundations and basements located below the groundwater level, water reservoirs, hydraulic structures, overpasses, swimming pools etc. It is used as a repair compound in the restoration of damaged concrete surfaces or masonry. It is applied on concrete / brick surfaces even with strong water filtration. It can be used as a complex waterproofing additive in concrete at the stage of construction, at the rate of 5% by weight of cement. Description Crystallisol W12: Crystallisol W12 is a mixture of Portland cement, calibrated quartz sand and chemically active additives. Properties Crystallisol W12: Waterproof under hydrostatic pressure W12. It is used for work on both old and new concrete structures. Increases frost resistance. Resistant to aggressive environments. Environmentally friendly, non-toxic. It is applied both from the inside and from the outside of the structure. Closed with tap water at room temperature. It is applied with a spatula on a surface saturated with moisture. Material consumption: 2.5 - 3 kg / m² (depending on the surface condition). Packing: 25 kg bag, 15 kg bucket.