Trade and production company sells machines "PROFI-2EM" with an electromechanical drive through a gearbox. The machine is designed for the manufacture of art products from a profile pipe and other rolled metal products using the "cold" forging method. Which in the future and in a certain combination are welded into fences, gates, grilles, canopies, furniture and much more. In 2016, the machines of the PROFI series were modernized. This made it possible to apply a new technology for the manufacture of forging elements from a profile pipe, squeezed on four sides by a V or U-shaped groove and curled "along the edge" (diagonal), with a jam of the end "goose foot" without heating the workpiece. Forging products made by this method: "curl", "monogram", "volute", "ring", are multifaceted and look more attractive (see the photo on the site). The PROFI-2EM machine is easy to use. For inclusion in the production process, the machine operator will need no more than an hour. The main advantages of the machine are: a large set of operations and equipment in the "basic configuration"; • absence of complex installation of additional devices, adjustment of rollers and guides for various operations; • simplicity and convenience in work, as well as in maintenance; • price availability of components and spare parts. The PROFI-2EM machine performs the following operations: • operation - decorative squeezing of a V or U shaped pipe with a groove; • operation - "foot jam", rolling of the ends of a profile pipe of two options: in a plane or "goose foot"; • operation - "twisting a spiral" into elements: "curl", "currency", "monogram", "rings", torsion and making a "bump"; Specifications: • overall dimensions, (length x width x height) 800x480x850 mm; • machine weight - 105 kg.