葵花籽 - 37493

FLOWMATE Food Grade Pump Water Pump Diaphragm Pump KDP-14 series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.

机械密封在哪里使用？ 在两个机械零件之间提供密封的零件，一个是活动的，另一个是固定的，称为轴封。 一般用于水泵、水龙头、轴承等场所。 旋转头在哪里使用？ 用于将热水、热油、蒸汽等流体输送到旋转滚筒上方的固定轴上。

Specifications • Length: 6 m • Width: 2.5 m • Height: 3 m • Weight: 2500 kg • Reading speed: 0.5-0.7 km / h • Productivity: 1.5 ha / day Conditions for machine harvesting • Condition for machine harvesting is 1.6 m of clean wood and a minimum row spacing of 3 m. ECONOMY • The machine is easy to operate and since it does not have a tractor or trailer it does not require much room to turn. AMOUNT • By aiming the generator at the shoulder branches instead of the tree, it is also possible to harvest plantations that are not planned for machine harvesting (the height of the first shoulder branches is less than 50 cm). QUALITY • No harmful effects on wood. Use • The harvester is designed for harvesting raspberries (meadow, polka, heritage), currants, chokeberries and rose hips. • The harvester is designed as a self-propelled machine powered by a 54 hp diesel engine. with. • The machine is operated by at least two employees (driver and crate remover). • The harvester is also adapted for night harvesting. • The machine is serviced by a minimum of four workers. • The machines have room for full and empty boxes. • The driver of the combine is located next to the generator, from where he can easily control the harvesting process and monitor the position of the machine, which was not the case with the towed machines. • By using a combine harvester, we also solve the previous problem of trampling raspberries with a tractor. • The machine is equipped with a hydraulic steering wheel. • A trailer can be attached to the machine for storing boxes. • Due to its size, this pick-up is designed for larger plantations and more flat terrain. • The pick-up is easy to handle and no special training is required.

Manufactured in Serbia. Specifications Length: 6 m Width: 2.5 m Height: 3 m Weight: 1950 kg the minimum spacing between rows is 4 m. Economy · The productivity of the machine is three to four trees per minute. Quantity · Collect much taller trees with more fruit than handpicked trees. Quality · The collector is universal for all distances in a row. Uses · The assembler SP-08 is built as a self-propelled machine. · It was equipped with a 35 hp diesel engine. · The machine uses a hydraulic handle controlled by the driver to dispose of the fetus. · The receiving cloth is placed in two planes that form the Latin letter "V" around the tree. Planes placed in this way allow easy harvesting without lifting branches. The opposite side of the tarpaulin is carried by the machine, and for trees over 5 m high, the other side is placed on the wheels and can be easily dragged from tree to tree. · The machine is serviced by at least four workers. · A trailer can be attached to the machine for storing boxes. · Due to its size, this collector is designed for large plantations and flatter terrain. · The assembler is easy to use and no special training is required. · A harmful effect on the tree is excluded. A prerequisite for harvesting the machine is that the height of the tree to the first branches of the arm must be higher than 50 cm and the minimum spacing between rows is 4 m. the height of the first branches of the shoulder is below 50 cm).

COMBINE FOR HARVESTING RASPBERRY AND BLACKBERRY Produced in Serbia. Specifications Length: 4.6 m Width: 2.7 m Height: 2.9 m Weight: 3 t Working speed: 1.8 km / h Vehicle speed: 10 km / h Drive: Diesel 35HP Conditions for the procurement of machines The minimum spacing between views is 2 m. The maximum height of the posts in a row is 2 m. Economics Up to 5 hectares can be harvested in one day with a harvester. To achieve this daily effect through manual cleaning, about 100 workers need to be hired. Quantity Unlike manual harvesting, only technologically ripe fruits that are of high quality and heavy are harvested from the plant. Using the mill eliminates the problem of labor shortages during the harvest season, so raspberry and blackberry growers can grow larger plantations and make the job more profitable. Quality The use of the plant facilitates the processing of fruits after harvest, since the harvested fruits are technologically ripe and homogeneous. Harvesting the machine avoids direct contact of workers with the fruit, so the fruit is microbiologically correct. Usage The raspberry and blackberry harvester is built as a self-propelled agricultural machine, whose fruit picking is based on a system of causing vibrations in the fruit shed, which causes the fruit to fall. This type of crop can effectively reduce only technologically ripe fruits without damage. Fruits are accepted and transported by conveyor to the place of automatic removal of impurities and storage of fruits in packaging. The harvester has a specially designed automatic leveling system that allows it to be used on sloping terrain. The harvester serves at least three workers: the driver of the machine and two workers to remove packaging and manage the fruit.

腌料-腌料中保存的各种蔬菜（水，醋和香料的混合物）的清单很大，例如黄瓜，西红柿，西葫芦，南瓜，甜椒和辣椒，大蒜，玉米芯，蘑菇和茄子。 LLC BESTEK-Engineering提供全套生产服务，可按制造商的价格提供现代，高性能的生产线，用于生产各种设计和改造的蔬菜罐头。每个技术线都是根据以下内容分别选择的：技术规格，可用区域，产品规格和所需的性能。

with 6 work stations FoodTec has designed ergonomic trimming & sorting conveyor in direct connection to the Metal Detector or Air-sucking & Sealing Machine. Alternatively, a trimming conveyor with 3,6,8 work stations for 3, 6, 8 persons is available. (Alternative sizes are available.) The side of the conveyor has a fixed supports to be placed standard baskets for easy trimming & sorting, then put products into the box. Change the angle of the supports can be placed the weighing platform, the weight of each package or each box is the same after weighing.   Feature: Removable conveyor belt for easy clean. The speed of conveyor belt can be adjusted by frequency inverter. Suitable for positioning next to Metal Detector or Air-sucking & Sealing Machine. Movable on wheels. The material of contact parts are made of stainless steel.   Specification: Dimension: L4200 x W600 x H800 mm Power: 0.2HP

Triple Blade FoodTec has designed a rotary cabbage shredding machine that operates with three rotating blades for large quantities of shredding application. Perfectly suited for industrial cutting of large quantities of cabbage as well as roots, such as green pepper, carrot, cucumber etc. The operator feed the products continuously without pausing and the products can be cut evenly. The severed products are transported to the conveyor belt through the water flow strength, ready for the next stage process. The speed of the feeding rotary disk can be adjusted through the frequency converter depending on the products. The products are perfectly shredded to your desired thickness. Easily adjustable from 0.5 to 15mm shredding thickness. The advantages of this machine for shredding solution: high capacity, perfect shredding appearance, reduction of preparation time, production efficiency as well as the labour saving. All these features make it an ideal equipment for the food processing factory, central kitchens and catering companies, etc.   Feature: Perfect shredding appearance. The products can be cut evenly. Highest output and production efficiency. Continuous filling without pausing. Significant time and labour saving. High quality for durability and long-life cycle. Hygienic construction design.   Specification: Dimension: L1000 x W1000 x H1400 mm Power: 2HP

Vegetable grinder large crusher can be used to grind vegetables like garlic, ginger, potato, onion, tomato and chili etc. into paste or mash shape. The grinding size can be adjusted by changing the quantity of blades. The advantages of this machine: high efficient, energy-saving and wide applicable range.   Feature: High efficient and energy-saving. Hygienic construction design. The machine is easily removable for easy clean and maintenance. High quality for durability.   Specification: Dimension: L1000 x W400 x H1200 mm Power: 3HP

FoodTec Air Knife machine is a low pressure, high volume air delivery tool designed specifically to blow-off all surface water, moisture, liquids of the products. The products to be processed on the stainless steel conveyor where the surface water or moisture needs to be completely removed. FoodTec Air Knife machine exhausts high velocity air can be evenly controlled through the uniform slot design thereby supplying a powerful air flow across the entire surface of the products being processed. Blower-driven solutions that increase production efficiencies and save significant running costs. FoodTec Air Knife machine equipped with stainless steel conveyor suitable for use in the food industry for process drying, cooling and cleaning of conveyed products. Food Processing applications include: Drying fresh products, such as salads, tomatoes and potatoes prior to the final packaging stage. Removing all surface moisture from cut potato prior to frying. Drying of food cans and jars prior to labelling and packaging processes. Even spreading of oil over pizza and bread. Removing any excess batter or coating from fish and chicken pieces. The advantages of this machine: easy installation, low-energy consumption and cost-effective solution providing significant energy savings. It is perfectly suited for food processors and packagers demanding their production lines run faster, occupy less space, be cleaner, have more flexibility and operate more efficiently than ever before.   Feature: Air Knife machine was designed specifically to blow-off all surface water, moisture, liquids of the products. The products to be processed on the SUS conveyor where the surface water or moisture needs to be completely removed. Air Knife machine exhausts high velocity air can be evenly controlled through the uniform slot design thereby supplying a powerful air flow across the entire surface of the products being processed. FoodTec Air Knife machine equipped with stainless steel conveyor suitable for use in the food industry for process drying, cooling and cleaning of conveyed products. The strength of the air flow can be adjusted by the slot. Trays under the conveyor. Swivel lockable castors. Significant energy savings.   Specification: Dimension: L2000 × W700 × H1700 mm Power: 6HP

FoodTec automatic vegetable centrifuge is developed to process various kinds of vegetables. It's perfect ideal for drying of delicate salad leaves, standard lettuce varieties, prepared vegetables and delicate herbs. After the product has been washed, it is brought directly onto the infeed belt. The product to be dried is evenly conveyed to the centrifuge drum and the infeed belt ensures the minimal movement of the product. This infeed belt is also used as a buffering belt. The infeed belt moves forward evenly during the feeding period. On completion of the filling cycle, the drum accelerates to the pre-set optimal rotating speed to suit the specific product to be dried. Once the centrifuging cycle has been completed, the drum automatically slows down and rotate 180 degrees, the product is gently discharged onto the outfeed conveyor. The continuous production and centrifuging cycle without interruption and the infeed conveyor re-fills the drum. During the discharge period, the centrifuge drum turns very slowly and activates a high pressure air knife which cleans all residual particles of leaf out of the drum. The drum has a completely smooth inner surface, the unique construction of the centrifuge minimizes product damage because of the spacious drum dimension. The fully automatic centrifuging process is controlled by PLC or the wireless network to operate that has several pre-programmed operation cycles or set the pre-determined program the possibility. There are facilities for 30 operational product programmes in the PLC control panel. The cleverly designed, sturdy construction of the vegetable centrifuge  is easy to maintain. Because the machine can be used both in line as well as at an angle, the machine is applicable for nearly each situation, or can be adapted to a modified situation in the future.  The automatic vegetable centrifuge can be integrated optionally to connect the whole vegetable processing line or the packing system.   Feature: 1.         Applicable to leaf, root vegetables drying/dewatering. 2.         The product to be dried is evenly conveyed to the drum at the optimal rotating speed. 3.         The drum automatically slows down and rotate 180 degrees to gently discharge the product. 4.         High pressure air knife will be activated which cleans all residual particles of leaf out of the drum during the discharge period. 5.         The continuous production and centrifuging cycle without interruption. 6.         Fully automatic centrifuging process is controlled by PLC or the wireless network to operate. 7.         Significant saving of time, energy as well as labour.   Specification: Dimension: L6935 x W3380 x H2700 mm Power: 9HP

The tubular vortex system from FoodTec is perfectly suited for final treatment stage of leaf vegetables, salads and root products to achieve germ reduction, prolongate shelf life of fresh-cut product and improve the quality of product. The product gently enters into a piping system by flowing water without passing through a pump. Chemicals and sanitizing additives can be added at different stages of the product transportation. At the discharge, the product is rinsed with fresh water through nozzles placed on top of the exit conveyor belt. Length of the piping system can be adapted to dwell time according to individual customer requirements. Flexible contact and dwell time of the product is adjustable from 3 to 5 minutes. The tubular vortex system can be optimal integrated into the existing processing lines according to various installation layouts for customer specific conditions are possible thus reach the space-saving. Stainless steel screws connection can be easily disassembled for cleaning the piping system. To dose and control suitable additives for product treatment in the water cycle.   Feature: 1.         The product gently enters into a piping system by flowing water without passing through a pump. 2.         To achieve germ reduction, prolongate shelf life of fresh-cut product and improve the quality of product. 3.         Chemicals/sanitizing additives can be added at different stages. 4.         The product is rinsed with fresh water through nozzles at the discharge. 5.         Length of the piping system can be adapted to dwell time. 6.         Space-saving.   Specification: Dimension: L3750 x W1200 x H2000 mm Power: 7HP