建筑混合物批发在 Qoovee市场

约1小时后重新涂上活性防锈颜料。 无铅无铬，活性底漆，不生锈，干得快。 可在短时间内使用合成树脂涂料重新涂漆。 作为铁件、铁门、钢结构、车辆、机械等的防锈底漆每层用量约150-200克/平方米颜色灰绿色、氧化红色、白色

即用型非贿赂增强剂，用于基于纯露的流平吸收 基于优质丙烯酸纯露的即用型非着色深层底漆。 用于嵌入和深度启动。 硬化轻微的沙质基材，并导致高吸收性基材的吸收均衡。 低排放和无溶剂。 消耗量约 100 - 200 毫升/平方米

- 良好的底漆效果，高产量，可水稀释 基于优质丙烯酸酯的无溶剂、可水稀释的底漆浓缩物。土壤效果好，产量高，环境友好。用于强化沙质和高吸水性基材，获得均匀吸水性的基材，并促进后续涂层在室内和室外的附着力。根据表面的性质，用蒸馏水稀释至 1:4。每层消耗量约 150 - 200 毫升/平方米 无色

水稀释性耐候性快干水稀释性亚光聚氨酯丙烯酸涂料，具有优异的加工性能。抗震、抗划伤和抗震，非常好的助焊剂，高覆盖率。用于木材、金属、硬质 PVC 和矿物基材上的高质量涂料的室内和室外哑光饰面（注意基材预处理）。在第 1 - 4 组中着色。可着色 171 RAL 和超过 40,000 种其他色调。每层涂层的消耗量约为 100 - 130 毫升/平方米 颜色 白色，透明底座。可以用 Murexin MIX 系统着色。

外木表面无油浸渍，干燥性好，渗透性高，耐候性（珠光效果）和耐候性好。 抗细菌和真菌。 将容器充分混合，使用后保持容器密闭。 清除木材上的灰尘、污垢、油脂和蜡。 用刷子、滚筒或喷雾器处理。 每层用量 250 毫升/平方米 颜色自然棕色

高覆盖率底漆，为沙质和吸收性基材提供高效性能 白色、无溶剂、分散体底漆。高品质二氧化钛，实现高覆盖率。用于室内和室外墙壁和天花板。用于后续在分散体和硅树脂基材上的涂层。不要在高吸水性或沙质基材上使用。非常适合作为干衬里的底漆。它也可以用作面漆。消耗量约 100 - 150 ml / m² 颜色

准备加工防水低污染渗透性准备加工的糊状薄层合成树脂渲染用于高嵌体和装饰元素。蚀刻薄石膏，白色或彩色，适合室内和室外使用。可手工或机器加工。防水、耐候、可渗透、可清洗、低污染倾向、易于加工、通用。消耗 1.0 毫米草结构 2.0 公斤 / 平方米，质量保证：由我们自己的工厂实验室自己监控。指定机构对持续生产控制的第三方监控。

耐磨水性绝缘漆，用于矿物基材以及木材、有色金属和硬质 PVC 的室内外绝缘涂料的墙壁和天花板。 可用作各种问题基材上的粘合剂和面漆。 每层消耗量约为 150 - 200 毫升/平方米 颜色 白色； 可以通过 Murexin MIX 系统涂成全色调、基色和阴影色以及色度组。 EAN：9002438120276 艺术编号：12027

隔热混合物 - 用于水平应用的现成隔热干燥混合物。 用于在屋顶和室内制作整体式隔热砂浆。

THERMOZON LLC 是一家生产绝缘材料的现代化工厂，提供绝缘石膏形式的 2 合 1 材料。 隔热石膏– 一次完成保温和墙面抹灰的材料。 它用于混凝土表面、砖、加气混凝土、泡沫混凝土砌体。 THERMOZON 为其产品提供保证。

Hydrophobizing compound for imparting water-repellent properties to porous building materials. To protect facades, lime and cement plasters from atmospheric moisture and capillary suction. Purpose Crystallisol Hydrophobizator: It is used for processing porous building materials: concrete, brick, gypsum, wood, plaster. The walls of the pores and all particles of the material in contact with the water repellent are enveloped in an invisible thinnest water-repellent film. The processed material loses its ability to be wetted with water and to absorb it capillary. When the composition is applied to the surface, a thin layer of polymer is formed on the pore walls, which is not wetted with water and does not allow water to penetrate into the pores. Crystallisol Hydrophobizator leaves the pores open, and the vapor permeability of building materials remains almost at the original level. Due to the device of a hydrophobic barrier, the material acquires water-repellent properties that persist for a long time, increasing its resistance to pollution and mold damage. When processing the facade, it is recommended to carefully apply the material to the surface, avoiding contact with glass, plastic window frames and other parts of the structure that do not require processing. Before applying, cover such places with paper, construction tape. Description Crystallisol Hydrophobizator: An aqueous solution based on methylsiliconates, which, penetrating into the pores of the structure, protect it from capillary inflow of water by changing the contact angle of the surface wetting. Properties Crystallisol Hydrophobizator: Possesses high chemical resistance and resistance to weathering. Does not form a surface layer. Does not prevent moisture evaporation from the material. Gives water and dirt repellent properties to materials. Retains the color and texture of the surface. Fireproof. Carry out work in dry weather at a temperature of at least + 5 ° C. Material consumption: 1 liter of concentrate - 155 m² of surface. Packing: polyethylene canister 1 l.

Complex for chemical milling of concrete and enhancing the adhesion of waterproofing coatings and self-leveling floors with a concrete surface. Purpose of Crystallisol CHIMFREZ / ACTIVE: Chemical milling of concrete surfaces (removal of the cement film) without destroying the cement stone, opening the pores of concrete and increasing the adhesion strength with monolithic concrete, with self-leveling floors, with tile adhesive, with cement, gypsum , magnesia screeds and plasters, with cement-based waterproofing materials, with interior and exterior cladding made of natural and artificial stone. Crystallisol CHIMFREZ dissolves the cement film and opens the pores of the concrete, Crystallisol ACTIVE adhesively activates the cleaned surface and increases the adhesion strength of the new layer with the previously laid one. They are used only in a complex: first, the concrete surface is treated with Crystallisol HIMFREZ, one hour later - with Crystallisol ACTIVE. Properties Kristallizol CHIMFREZ / ACTIVE: Effective for working on concrete grade up to M300. Replaces / complements mechanical and machine hydro-blasting of concrete surfaces. Eliminates "cold seams" in monolithic construction. Apply by brush or roller. The work is carried out at an ambient temperature of + 5 ° C. The compositions are fireproof. They are odorless. They do not have a harmful effect on humans and the environment. Does not contain hydrochloric, acetic, citric, orthophosphoric acids and substances that destroy concrete. Material consumption: 0.1 - 0.3 l / m² (depending on the condition of the surface). Packing: plastic cans 10 l.

Fast-hardening compound for the elimination of local active leaks. Setting time from 30 seconds to 3 minutes. Purpose Kristallizol GIDROPLOMBA: To protect concrete, reinforced concrete, stone and brick structures from water penetration and exposure to aggressive media. It is used to eliminate pressure leaks through cracks, seams, technological holes in structures. Ambient temperature during application from + 5 ° C. Properties of Crystallisol GIDROPLOMBA: Composition hardening time from 30 seconds to 3 minutes. High water-stopping properties. Resistant to aggressive environments. Breathable. Environmentally friendly, non-toxic. Fireproof. Material consumption: 2 kg / dm³ (a ball with a diameter of 9-10 cm is obtained from 400 grams). Packaging: 2 kg bucket.

Complex additive in concrete solution to increase concrete water resistance. Purpose of Crystallisol MONOLIT: It is recommended to use Crystallisol Monolit as a complex waterproofing additive in a concrete solution at the stage of construction of hydraulic structures, civil and industrial construction, tunnels, overpasses, bridges, when installing concrete screeds, etc. The grade of concrete to which it is planned to add Crystallisol Monolith as an additive to increase its water resistance must be at least M150. Properties of Crystallisol MONOLITH: Increases the strength and density of concrete. Increases the water resistance of concrete. Increases the frost resistance of concrete. Does not reduce the protective properties of concrete in relation to reinforcement. Compatible with plasticizing and anti-freeze additives. Resistant to aggressive environments. Environmentally friendly, non-toxic. Material consumption: 1% by weight of cement. Packaging: 15 kg bucket.

One-component flexible waterproofing sealant for all types of surfaces. Purpose of Crystallisol Elast: To create a thin (2-4 mm) waterproof layer applied both outside and inside structures subject to dynamic loads. With a layer thickness of 2 mm, it is capable of bridging cracks over 0.9 mm, the elongation at break is about 10%. It is used for work in tanks with drinking water without limiting the dimensions of the structure. The final layer resembles an elastic rubber and has high adhesion to all possible surfaces. The treated surface, due to its high adhesion, does not flake off and is able to withstand significant mechanical stress. With a layer thickness of 4 mm, after 7 days of normal hardening, water resistance is achieved at the level of W14 at water pressure "on the hold-down" and W8 at the "pull-off" pressure. Description Crystallisol Elast: Crystallisol Elast is a dry mixture of Portland cement, calibrated quartz sand and chemically active additives. Application thickness for 1 pass up to 4 mm. Ready time - 3 days. Properties of Crystallisol Elast: Waterproof at hydrodynamic pressure up to W14. Low shrinkage deformations. High curing rates. High fracture toughness. Resistant to aggressive media, acid-alkali-resistant. Works on all types of substrates, including metal ones. Environmentally friendly, non-toxic. It is applied both from the inside and from the outside of the structure. Closed with tap water at room temperature. It is applied with a spatula or brush. Material consumption: 3 kg / m² with a layer thickness of 2 mm. Packaging: 25 kg bag.

Repair and restoration plaster waterproofing material of penetrating action. For repair, restoration and waterproofing of old concrete and destroyed brickwork, as well as for leveling the surface. Purpose Kristallizol Repair: For the repair of concrete and brick destroyed structures in order to ensure water tightness, increase strength and frost resistance. Restoration and leveling of destroyed areas on concrete and brick, waterproofing plaster surface coating. Description Crystallisol Repair: Crystallisol Repair is a mixture of Portland cement, calibrated quartz sand and chemically active additives. Properties Crystallisol Repair: Waterproof under hydrostatic pressure W8. It is used for work on old, destroyed concrete and brick structures. Forms a waterproof armored layer. It is applied both from the inside and from the outside of the structure. Increases frost resistance and structural strength. Resistant to aggressive environments. Environmentally friendly, non-toxic. Closed with tap water at room temperature. It is applied on a surface saturated with moisture. Material consumption: 1.3 - 1.5 kg / m² with a layer thickness of 1 mm (depending on the surface condition). To achieve a waterproofing of 8 atmospheres, a layer of 10 mm is required. Packaging: 25 kg bag.

Non-shrinking joint waterproofing material of penetrating action. It is used to eliminate water filtration through abutment joints, cracks, chips of concrete and brick structures. Purpose Crystallisol Suture: For internal and external waterproofing of joints in underground and buried structures: horizontal and vertical joints of concrete and brick structures, seams of foundation blocks, brickwork, "cold joints", etc. Description Crystallisol Suture: Crystallisol Suture is a mixture of Portland cement, calibrated quartz sand and chemically active additives. Properties Crystallisol Suture: Waterproof under hydrostatic pressure W8. It is used for work on both old and new concrete and brick structures. Resistant to aggressive environments. Non-shrinking, does not require additional maintenance. Increases the frost resistance of the structure. Environmentally friendly, non-toxic. Closed with tap water at room temperature. It is applied on a surface saturated with moisture. It is applied both from the inside and from the outside of the structure. Material consumption: 0.9 - 1 kg / lm (with a groove section of 20x20mm). Packaging: 25 kg bag, 15 kg bucket

Penetrating waterproofing material for work on new concrete surfaces in the absence of groundwater filtration at the time of work. Apply with a brush. Purpose of Crystallisol W12 Kistevoy: For internal and external waterproofing of concrete structures in underground and buried structures operating under conditions of constant or variable exposure to the aquatic environment: foundations and basements located below the groundwater level, water reservoirs, hydraulic structures, overpasses, pools, etc. It is applied to the surface in the absence of strong water filtration at the time of work. Not used for brickwork. Description Crystallisol W12 Kistevoy: For internal and external waterproofing of concrete structures in underground and buried structures operating under conditions of constant or variable exposure to the aquatic environment: foundations and basements located below the groundwater level, water reservoirs, hydraulic structures, overpasses, pools, etc. It is applied to the surface in the absence of strong water filtration at the time of work. Not used for brickwork. Properties Crystallisol W12 Hand: Waterproof under hydrostatic pressure W12. It is used for work on new concrete structures. Increases frost resistance. Resistant to aggressive environments. Environmentally friendly, non-toxic. It is applied both from the inside and from the outside of the structure. Closed with tap water at room temperature. It is applied with a brush on a surface saturated with moisture. Material consumption: 0.8 - 1 kg / m² (depending on the condition of the surface). Packaging: 25 kg bag, 15 kg bucket.

Water-stopping waterproofing material of penetrating action. For work on concrete and brick surfaces with strong filtration of groundwater. Purpose of Crystallisol W12: For internal and external waterproofing of concrete, stone and brick structures in underground and buried structures operating under conditions of constant or variable exposure to the aquatic environment: foundations and basements located below the groundwater level, water reservoirs, hydraulic structures, overpasses, swimming pools etc. It is used as a repair compound in the restoration of damaged concrete surfaces or masonry. It is applied on concrete / brick surfaces even with strong water filtration. It can be used as a complex waterproofing additive in concrete at the stage of construction, at the rate of 5% by weight of cement. Description Crystallisol W12: Crystallisol W12 is a mixture of Portland cement, calibrated quartz sand and chemically active additives. Properties Crystallisol W12: Waterproof under hydrostatic pressure W12. It is used for work on both old and new concrete structures. Increases frost resistance. Resistant to aggressive environments. Environmentally friendly, non-toxic. It is applied both from the inside and from the outside of the structure. Closed with tap water at room temperature. It is applied with a spatula on a surface saturated with moisture. Material consumption: 2.5 - 3 kg / m² (depending on the surface condition). Packing: 25 kg bag, 15 kg bucket.

它们主要用于混凝土和砖结构的反渗透保护，以在水平（包括天花板）和垂直表面上形成防水层。即用型不需要预热。含有水泥和纤维填料。

即用型防水胶泥。乳香非常适合防水地基、地下室、楼板

High quality building plaster.

Dry building mixes at wholesale prices.

阿不思波特兰水泥 M-400 等级： 松散 - 590 和普通包- 670和名牌包-690和阿不思波特兰水泥 M-500 等级： 名牌包-790和睦付款方式：银行转账

水性 PVA 胶水 AQUASIVE。应用领域：纺织复合、木工、造纸和包装等。

热熔胶 POWERMELT 应用领域：木工、食品包装、装订、袋装弹簧、床垫生产、地毯、绳索捆扎、标签、卫生等。

溶剂型粘合剂 GUCLU。应用领域：家具、木材和汽车行业、鞋业和皮革行业。

基于水泥粘合剂和聚合物添加剂的现成干胶（混合物）。用于粘合彩陶和瓷砖、大理石和花岗岩板、玻璃马赛克砂浆等饰面材料。熨平板表面、封闭和开放区域的混凝土、水平和垂直表面、瓷砖等。瓷砖。

基于水泥粘合剂和聚合物添加剂的现成干胶（混合物）。它用于粘合陶瓷、彩陶、瓷砖等的室内和外墙工程。瓷砖。

石膏基干建筑分散腻子混合物，含有聚合物添加剂，根据 GOST 31387-2008 制造。 通用石膏腻子 FUGA 适用于： - 石膏板和石膏纤维板的薄层填缝； - 填充预制混凝土构件的接缝； - 将石膏板和组合板粘合到平面上； - 用于室内工作。 易于涂抹，光滑和打磨。它对混凝土和干墙具有良好的附着力。它允许空气通过，从而平衡湿度水平。非常轻巧，提供隔热效果。具有防火性能。

石膏基干建筑分散腻子混合物，含有各种添加剂，根据 GOST 31387-2008 制造。设计用于在建筑物和结构的建造、维修和重建期间的内部工作期间平整石头、砖、灰泥和其他表面。腻子混合物也可用作后续装饰涂料（油漆等）的基础，易于涂抹、平滑和打磨。它对混凝土和干墙具有良好的附着力。应用于后续层时不会卷起，干燥时不会开裂。为绘画和墙纸创造一个平坦光滑的表面。它允许空气通过，从而平衡湿度水平。非常轻巧，提供隔热效果。具有防火性能。

根据 GOST 31387-2008 在石膏粘合剂和各种添加剂上制成的干建筑腻子混合物。具有高粘合性能。它用于在混凝土、水泥砂浆或石膏灰泥和石膏基层的其他表面上进行内部工作时准备表面以进行整理。一次应用中的层厚 - 1 毫米。创造一个不需要底漆的平坦光滑的表面，用于绘画或墙纸。干燥时，它不会开裂并允许空气通过，从而平衡水分含量。非常轻巧，提供隔热效果。不排水或收集。具有防火性能。

石膏基干石膏混合物，根据 GOST 31377-2008 制造。用于石材、砖、石膏、混凝土、整体混凝土等的找平和抹灰的室内工作。表面。它的应用层厚为 5 毫米至 50 毫米。它具有高粘合性能，不需要额外的材料。不排水或收集。它允许空气通过，从而平衡房间内的湿度水平。提供隔热。具有节能和防火性能。

从土耳其批发和交付水泥。

目的： 设计用于破坏和防止在矿物材料（石头，混凝土，石膏，石膏，瓷砖，石膏，石膏板等）和木材（胶合板，纤维板，刨花板等）上形成霉菌，真菌，苔藓，地衣。 ）。建议用于处理建筑物，围墙，高湿度房间（地下室，地窖，厨房，浴室，温室）的外墙和地下室。可以将其作为杀生物添加剂添加到未改性的灰泥，砌筑砂浆，腻子中，而无需混合水。该工具可完美清洁墙壁，砖砌，天花板，面板间接缝的表面。具有持久的作用。好处：长达15年的长期保护；有效地保护免受生物损害和昆虫侵害；环保，不含溶剂；不会损坏或弄脏处理过的表面。作为杀菌添加剂，而不是与水混合。应用方式：该产品必须用水稀释。前一层干燥后，用刷子，辊子涂抹抗菌剂，喷涂2-3次。当处理已经受影响的表面时，请使用防腐剂，在24小时后清洁表面并重复处理。当处理直接暴露于水的矿物表面时，干燥后用防水的GKZH-11或防水涂料和清漆覆盖。平均消耗量100-150克/平方米米在矿物地面上和200-300 gr./sq。米为木头。在砂浆混合物中用作杀生物添加剂时，请少量测试其相容性。水性涂料：在20升涂料中加入250毫升涂料，并充分混合。灰泥添加剂： 250毫升的产品足以溶解10升的水。将水泥浆或灰泥混合在所得溶液上。灌浆：每5千克干物质向混合水中添加50毫升。墙纸胶的添加剂：每1升水向胶水混合液中添加约25-30毫升活性剂，然后根据说明制备胶水。注意事项：工作时，对皮肤，眼睛和呼吸器官使用防护设备（橡胶手套，工作服，眼镜，呼吸器）。如果接触到皮肤，粘膜，眼睛，请立即用大量流水冲洗10-15分钟。如有必要，寻求医疗救助。危险：可能对皮肤有刺激性。储存和运输：在+ 5°C至+ 40°C的温度下，与食物分开存放在密封的原始容器中，并在阴凉通风的室内运输和存放，儿童和动物请勿接触。避免加热和阳光直射。该组合物在短期冷冻后保持其性质。根据SanPin 2.1.7.1322-03处理保质期： 36个月

Fire retardant compound with a powerful antiseptic effect for outdoor and indoor use. It is an aqueous solution of highly effective fire retardants, antiseptics, fungicides and functional additives. Protects wood from fire and the spread of flame indoors for up to 16 years, provides 1 group of fire retardant efficiency in accordance with GOST R 53292-2009 at a consumption of 270 gr. per m², and for up to 30 years from decay, mold, damage by wood-boring insects at a consumption of at least 100 gr. per m². The composition is environmentally friendly. Possibly perform processing to -20 ° C. Does not salt out on the surface. Tones wood in a pleasant amber shade.

Fire retardant compound with a powerful antiseptic effect for outdoor and indoor use. It is an aqueous solution of highly effective fire retardants, antiseptics, fungicides and functional additives. Protects wood from fire and the spread of flame indoors for a period of at least 15 years, provides 1 group of fire retardant efficiency according to GOST R 53292-2009 at a consumption of 275 g / m2, and for up to 25 years from rotting, mold, insect damage woodworms at a consumption of at least 100 g / m². The composition is environmentally friendly, the pH of the composition is 5.5 - 5.7 - which corresponds to the acidity of the skin of an average person and is made from raw materials marked "FOOD" - for food production. Can be processed down to –25 ° C. Does not salt out on the surface and does not tint the wood. After processing with the Kaisar "Premium" composition, any glazing compositions can be applied.

Hydroizol "Haveg" is often used for roof protection. This material is extremely easy to apply, which allows you to quickly process the surface. It is very easy to apply a layer of liquid rubber, and it can be done with various tools. Temperature Stability: Resistance of the waterproofing cover to any temperature: from -50C ° to + 85C ° Durability: The service life of the finished coating is up to 30 years. Absolute UV protection. Impact resistance: The coating is resistant to shock loads both at positive and negative temperatures.   Source and copyright holder:

We are Geoser company from Turkey, a manufacturer of Geosynthetic and waterproofing materials such as HDPE, PVC, LDPE, EPDM and Waterstops. we can provide Geomembrane and Liners in a variety of physical, mechanical, and chemical resistant properties.

We bring to your attention the products of our plant - SoftRock Stone Finishing Coating. It is a water-dispersive polymer coating with a mineral filler and UV inhibitors in its composition. The coating has the following consumer properties and characteristics: · Does not fade; · Possesses high adhesion; · Forms a dense layer on the surface; · Vapor permeable; · Moisture resistant; · Does not create smudges; · Resistant to stretching; · Has high weather resistance; · The surface is covered with a protective film, which prevents the absorption of dust, dirt, etc .; · Simple to use; · Provides high speed of application; · Has a wide range of colors, can be tinted like paint; · Does not deteriorate for more than 25 years. The coating is applied with a texture gun or trowel. The standard consumption is 1.2 kg / m2 on a primed surface, with a layer thickness of 0.8 mm. Stir with a mixer before use! Instructions for applying with a textured (cartridge) pistol: Nozzle 4 mm, mixture supply no more than 30% of the total range of the pistol valve. The compressor is recommended with a receiver from 50 liters. The coating is applied in a circular motion from a distance of 30-40 cm. The mixture is diluted with water in the range of 150-250 ml per 17 kg bucket, no more! Surface preparation: 1. Deep penetration primer. 2. When painting in dark colors, the coating is applied in one layer. 2.1. When painting in light colors, it is recommended to cover the base with acrylic paint of the same color, then apply the stone coating in one layer.