CREEWEE NEW MATERIALS TECHNOLOGY CO.,LTD (CREEWEE NEW MATERIALS) is a leading manufacturer of high-temperature special pressure-sensitive adhesive tapes in Dongguan City, Guangdong China since 2006. The factory is currently equipped with three coating production lines with different functions, the widest effective width is 1.6m, the equipment has high coating precision, engaged in producing various kinds of Industrial tapes for High Temp. Polyimide Label, Gold plating, Surface protection, splicing and etc. We have 6000 square feet Class 1000 dust-free workshop, our factories passed ISO 9001 certificates. All materials and products passed RoHS. We use the advanced new raw materials, strict process control and product testing processes to ensure product quality. Especially high-temperature adhesives established a leading position in the China New Enegry market in the last 15 years. Thermal Management Tapes, Flame-retardant Tapes (UL 94VTM-0), high-temperature electrical insulating
做一个安全的处理这个供应商。
提交预订单
USD
5.0/个/件/只
我们的导电泡沫垫片在（金属）熔池中进行金属涂覆之前，要按可变的间隔打孔。这将泡沫完全浸透并使其完全导电（水平和垂直），从而确保顶部和底部之间的导电连接特别好。由于孔之间的距离较小，因此密封件具有出色的性能。我们的导电泡沫的厚度范围为0.3毫米至1.5毫米，并可以提供铜-镍金属涂层。导电泡沫的特性可以在-50°C至+ 100°C的温度范围内使用，并在高频范围内具有出色的屏蔽效果。导电泡沫密封件具有改善的Z轴导电性，这意味着它们的屏蔽性能可以在很宽的频率范围内提高到90db以上。标准尺寸以及定制的冲压件我们的泡沫密封件有多种标准尺寸可供选择。我们可以以薄板的形式提供它们，这是屏蔽大面积的理想选择，也可以提供定制的冲压以进行I / O屏蔽。
USD
2.0/个/件/只
规格：基材厚度：0.007mm-0.075mm胶粘剂厚度：0.015mm〜0.04mm胶体成分：普通压敏胶（非导电）和导电压敏胶剥离力：0.2〜1.5kgf / 25mm（180度反向剥离力）测试）耐温-10℃--- 120℃抗拉强度4.5〜4.8kg / mm伸长率7％〜10％MIN产品长度：33M，50M或定制产品宽度：13mm＆25mm或定制产品特性：Creweeee铜箔胶带铜带特殊粘合剂，它可消除电磁（EMI）干扰。它主要用于电磁屏蔽，电信号屏蔽和磁信号屏蔽。电信号屏蔽主要依靠铜本身优异的导电性。磁屏蔽需要在铜箔带的橡胶表面上使用导电材料“镍”才能达到磁屏蔽的效果。另外，它对接地后的静电放电有良好的效果，具有很强的附着力和良好的导电性。材料：1）铝带导电胶2）铜带非导电胶3）铜带导电胶4）铜带双面导电胶5）镀锡铜带非导电胶6）锡-带导电胶的复合铜带应用：适用于各种需要电磁屏蔽的变压器，移动电话，计算机，PDA，PDP，LCD显示器，笔记本电脑，计算机，打印机和其他电子产品。
USD
1.0/个/件/只
Model No. G0226HPF
Materials: Kapton Tape (Polyimide film）
Thinness: 0.05mm
Film Size: 4.5*4.5mm-- 24*24mm
Customs size: Fit all Sensor Module size
The film is applied in below Industries:
Protect CCTV Camera Image sensor CMOS surface out of dust during assembly;
Protect the CMOS sensor, through SMT process under 280 ℃degrees without leaving adhesive residue; Due to Low viscosity and heat resist, Kapton film can be easily peeled off without leaving adhesive residue;
Can be attached to the IR Glass surface near temperature furnace, to protect the lens surface away from dust and scratches in the manufacturing process.
咨询
供应商:
"Узлегпром"
商品:
供应商:
最少订单:
经理处
销售部门:
销售部门:
销售部门:
信息
告诉经理，您在Qoovee 上找到了商品
供应商联系人不可用!
写信给供应商
