قالب حوض استحمام الطفل - 63687

Вентиляционная решетка пластиковая- круглая отлично подходит для прикрытия отверстия в стене, в потолке или для закрытия вентиляционного канала Изготовлена из качественного материала ABS. Экологически чистая, прочная. Для подключения к круглым воздуховодам 125 мм, монтаж с помощью монтажного фланца

Люк ревизионный пластиковый 200х300 мм Люк-дверца ревизионный пластиковый с ручкой. Для доступа к скрытым узлам и инженерным коммуникациям. Предназначен для установки в стене или потолке. Оснащен ручкой для удобства открытия/закрытия люка. Возможно использование во влажных помещениях. Простой уход. Монтаж осуществляется при помощи раствора или клея.  

Решетка вытяжная R-30 используется в ситемах принудительной и естественной вентиляции, применяется для оформления входного/выходного отверстия вентиляционного канала. Стандартный белый цвет позволяет вписать ее в любой дизайн. Жалюзи обеспечивают поступление воздушного потока под оптимальным углом, защищают от пыли и мусора. Размеры изделия 200х300 мм, оно изготовлено из пластика АБС, крепится на клей или с помощью шурупов. Преимущества: 1. невысокая цена; 2. привлекательный внешний вид; 3. легкий монтаж и демонтаж.

A set of Turkish bath and toilet rugs made of 100% cotton will match any interior and add comfort and beauty to every bathroom. The mat is soft and pleasant to the touch. High-quality tailoring of the product guarantees a long service life, which makes the purchase of this product a good choice not only for personal use, but also perfect as a pleasant and stylish gift! It is recommended to wash the rugs at a temperature of 30 degrees only in a delicate mode, do not wring out or use a drying chamber / dry cleaning, do not iron with an iron. Bath mat size: 100x60 cm, toilet mat: 50x60 cm. Great color variation! Not all are published on the site! The goods are delivered to the territory of the Russian Federation directly from the Turkish manufacturer at cost price! The final price will depend on the order quantity. Interested in large and small wholesale.

Saban Plastik Ev Gereçeri İmalat San.ve Tic.Ltd اسطنبول تركيا

A set of Turkish bath and toilet rugs made of 100% cotton will match any interior and add comfort and beauty to every bathroom. The mat is soft and pleasant to the touch. High-quality tailoring of the product guarantees a long service life, which makes the purchase of this product a good choice not only for personal use, but also perfect as a pleasant and stylish gift! It is recommended to wash the rugs at a temperature of 30 degrees only in a delicate mode, do not wring out or use a drying chamber / dry cleaning, do not iron with an iron. Bath mat size: 100x60 cm, toilet mat: 50x60 cm.Large color variation! Not all are published on the site! The goods are delivered to the territory of the Russian Federation directly from the Turkish manufacturer at cost price! The final price will depend on the order quantity. Interested in large and small wholesale.

Garden path mold Round Stones 80x80x6 cm Garden paths create a chic view of the suburban area, which add tidiness and nobility.   Concrete paths are durable and very practical. They are not afraid of any atmospheric conditions and are easy to clean.   At the present time, it is possible to make a concrete path with your own hands using special forms. Such a path will not only create comfort and coziness, but also emphasize the design of your site.   Drawing - an imitation of natural stone will help to create a mold for making a garden path. Round Stones 80x80x6 cm. This plastic mold consists of 9 cells that have an arbitrary shape and are connected together. They form a certain pattern, while the shape is designed in such a way that it allows the slabs to be joined together in any direction, to obtain tracks of the required width, as well as to make turns (bends), while the joints are absolutely indistinguishable.   It is also possible to adjust the color scheme of the garden path using various additives. With this form, you can easily decorate the paths in the garden or playground and you will be satisfied with the work done with your own hands.   Benefits of using a garden path mold: Fast production - the solution is ready within 20-30 minutes;   Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;   Saving the budget - only the purchase of materials;   Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.   Characteristics of the shape for the garden path Round stones: Manufacturer: Hormusend Country of origin: Ukraine Guaranteed number of pouring cycles: 1000 Number of molds per 1m2: 1.56 pcs Pattern: round stones Type: garden path mold Material: wear-resistant plastic (polypropylene) Number of stones in the form: 9 pcs Finished board height: 60.0 mm Finished stone height: 60.0 mm Volume: 40 l Length: 800.0 mm Width: 800.0 mm Height: 60.0 mm Weight: 1.6kg Volume weight: 9.6 kg

Garden path mold Castle Stone 60x60x6 cm It has become easier to create comfort and coziness in the garden. You can make an unusual geometric design, similar to a composition from a natural stone, without a lot of time. You don't need to match each item individually. Simply pour the solution into the garden mold. From the resulting slabs, you can easily create a decorated walkway.   The garden path mold will serve you for a long time, as it is made of wear-resistant polypropylene. You can always use it to create an additional pedestrian zone in the garden.   The walkway will emphasize the design of your site, as the pattern is similar to a natural stone composition.   Benefits of using a garden path mold: Fast production - the solution is ready within 20-30 minutes;   Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;   Saving the budget - only the purchase of materials;   Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.   Characteristics of the mold for the garden path Castle Stone: Manufacturer: Hormusend Country of origin: Ukraine Type: garden path mold Material: wear-resistant plastic (polypropylene) Pattern: imitation of a wild stone Number of stones in the form: 9 pcs Guaranteed number of pouring cycles: 1000 Number of molds per 1m2: 2.78 pcs Finished board height: 20.0 mm Finished stone height: 40.0 mm Length: 600.0 mm Width: 600.0 mm Height: 60.0 mm Weight: 1.7kg

Garden path mold Castle Stone 60x60x6 cm with handles An integral element of a well-groomed garden is a garden path, which allows you to comfortably move through it and not worry about the ground sticking to your shoes.   With minimal knowledge of construction and little effort, it is easier to pour a concrete path than to lay tiles. To make it as quickly and easily as possible, use a unique modern development - a special stencil that looks like cells that realistically imitate natural stones.   An unusual geometric design will allow you to make an easy-to-use shape for a garden path Castle Stone 60x60x6 cm with handles.   The garden path mold is made of wear-resistant polypropylene and is equipped with 2 handles for convenience. You just need to pour the solution into it, and after partial hardening, the form can be removed. Provided manufacturer's warranty for up to 1000 pouring cycles.   For a unique design, it is recommended to add a color pigment directly to the solution.   Benefits of using a garden path mold: Quickness of manufacture - the solution is ready within 20-30 minutes;   Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;   Saving the budget - only the purchase of materials;   Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.   Characteristics of the mold for the garden path Castle Stone: Manufacturer: Hormusend Country of origin: Ukraine Type: garden path mold Material: wear-resistant plastic (polypropylene) Pattern: imitation of a wild stone Number of stones in the form: 9 pcs Guaranteed number of pouring cycles: 1000 Number of molds per 1m2: 2.78 pcs Finished board height: 20.0 mm Finished stone height: 40.0 mm Length: 600.0 mm Width: 600.0 mm Height: 60.0 mm Weight: 1.7kg

Form for a garden path Old Town 60x40x6 cm A garden path on the site not only creates a beautiful view and comfort, but also is an excellent protection for your shoes from the ground, dirt and dust.   Thanks to modern technologies, it is possible to make the coating independently, which gives complete confidence in its quality.   Plastic mold Old City 60x40x6 cm for laying a concrete path will help you to model and lay your garden path or playground in the shortest possible time.   It is reusable, made of durable material - polypropylene. On the slab there are 9 decorative stones 11x18cm, the seam depth is 2 cm. The wall thickness is 4 mm, the edging of the stone is 2 mm. In places of loading, stiffeners are implemented, which allows it to withstand 1000 moldings.   To use it, it is enough to prepare a concrete solution. The shape fits well on either side, allowing you to make the track seamless.   If we compare the total costs, then a do-it-yourself garden path made of concrete, obtained using a form, will cost less than laying tiles or pebbles.   Benefits of using a garden path mold: Fast production - the solution is ready within 20-30 minutes;   Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;   Saving the budget - only the purchase of materials;   Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.   Characteristics of the form for the garden path Old Town: Manufacturer: Hormusend Country of origin: Ukraine Guaranteed number of pouring cycles: 1000 Number of molds per 1m2: 4.17 pcs Pattern: Old Town Type: garden path mold Material: wear-resistant plastic (polypropylene) Number of stones in the form: 9 pcs Finished board height: 60 mm Finished stone height: 60 mm Length: 600.0 mm Width: 400.0 mm Height: 60.0 mm

Garden path mold Universal Stone 60x40x6 cm A beautiful view of the countryside provides a decor that should be combined with the rest of the garden. Its main element is a practical and unique garden path or playground, which can be easily modeled and created with your own hands using plastic molds and a concrete grout.   An excellent solution for a plot that is decorated in a strict, classical or modern style would be the use of an unusual shape for the garden path Universal Stone 60x40x6 cm, the design of which is designed for convenient work with concrete.   It is a sturdy and secure shape with strong edges. Its feature is the presence of technological holes for handles, which is convenient when pouring large areas. During the first molding, special cavities in the inner seam are filled with mortar, which gives the form additional strength.   The drawing of the shape is two large and two small triangles. The outer frame is made in such a way that it can be easily docked even with molds from other manufacturers.   For the uniqueness of the design, it is possible to adjust the color scheme of the garden path with the help of various additives.   By making your own coating, you will be sure not only of its quality, but also of budget savings.   Benefits of using a garden path mold: Fast production - the solution is ready within 20-30 minutes;   Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;   Saving the budget - only the purchase of materials;   Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.   Characteristics of the form for the garden path Universal Stone: Manufacturer: Hormusend Country of origin: Ukraine Guaranteed number of pouring cycles: 1000 Number of molds per 1m2: 4.17 pcs Pattern: universal stone Type: garden path mold Material: wear-resistant plastic (polypropylene) Number of stones in the form: 4 pieces Finished board height: 60 mm Finished stone height: 60 mm Length: 600.0 mm Width: 400.0 mm Height: 60.0 mm Weight: 1.0KG

1、 Product Introduction:Fiberglass pressure drums are made of composite materials wrapped with epoxy and fiberglass, and have integral thermoplastic inner liners (including blow molding and rotational molding). Compared with steel containers of the same specifications, they have the advantages of high strength, light weight, corrosion resistance, and long service life. Mainly used for soft water treatment in water treatment, it serves as a water container. By displacement reaction, the concentration of calcium and magnesium in water is reduced, making it less likely for carbonate scale to form in water and forming soft water.2、 Corrosion resistance:1. Pressure vessels are made of high-performance composite materials and fiberglass.2. All pressure vessels are 100% corrosion-resistant.3. There are various materials and integral molded thermoplastic inner liners, such as polyethylene, high-strength polypropylene, etc.4. Depending on the diameter of the container, there are different inner liner thicknesses ranging from 3.8mm (0.150 inches) to 7.6mm (0.300 inches).3、 Size and characteristics:1. We can provide pressure vessels of different sizes, with a much wider range of choices than other similar products.2. The maximum diameter of the tank is 36 inches and the height is 72 inches.3. The opening form is always an upper opening, and buckets ranging from 18 "to 36" can have upper and lower openings.4、 Construction performance1. Compared to steel containers of the same specifications, it has the same strength but weighs only one-third of a steel container.2. Various rigorous performance tests have shown that the performance of composite materials far exceeds that of steel materials.3. The standard operating pressure is 10.5kgf/cm2 (150psi); The standard operating temperature is 65 ℃ (150 ℉).5、 Installation and maintenance costs:1. Fiberglass pressure vessels are lightweight and easy to install; Reduce additional expenses for users.2. The tank body does not require painting, nor does it need to be lined with glue or coated with epoxy.3. Reduce maintenance costs and minimize downtime for repairs.Design process: 1. Designing and manufacturing pressure vessel products requires rich professional skills and production capabilities.2. For the details in the design, our engineering and technical personnel will carefully inspect to ensure that the pressure vessel works normally under high pressure for a long time.