Anti-Mold for Wood
وصف السلعة
Purpose: Designed for long-term protection of wood from mold, blue stain, wood-destroying and wood-coloring fungi, decay and wood-boring insects in conditions of moderate exposure to atmospheric precipitation and condensate moisture, as well as inside residential, public and agricultural premises. The term of protection in the absence of direct washout or subject to additional protection with film-forming paints and varnishes is up to 25 years. In case of intense exposure to adverse factors, periodic re-treatment is recommended. Scope: It is used in the processing of new and previously treated with antiseptics wooden planed, sawn or log elements and structures, such as: walls, cladding, facades, terraces, cattle corrals, rigid roof elements, joists, rafters, fences, windows, doors, decorative parts, pallets, etc. Benefits: long-term protection up to 25 years; effectively protects against biological damage and insects; environmentally friendly, does not contain solvents; can serve as an independent coating, or as an antiseptic impregnation for painting; does not damage or stain the treated surfaces. Surface Preparation: Clean wood from dirt, dust, old paintwork, etc. If the wood surface is blue or moldy, it is recommended to first remove it with wood bleach. Application Instructions: Carry out works at a temperature not lower than + 5 ° С. Stir the antiseptic before use. Apply with a brush, roller, spray in 2-3 doses at intervals of 20-30 minutes, ensuring the required total consumption. The treated wood must be dried for at least 24 hours, protected from water and precipitation. The maximum protection period is obtained when processed by immersion, soaking or autoclaving. Soaking or impregnation in an autoclave is carried out until the specified flow rate is reached. Do not handle frozen wood! It is recommended to periodically check the integrity of the treated surface, if mechanical damage is found, re-treat it. Consumption: for planed wood - 200-400 g / m²; for sawn wood - 250-500 g / m², depending on the surface quality. Precautions: When working, use protective equipment for skin, eyes and respiratory organs (rubber gloves, overalls, glasses, respirator). In case of contact with skin, mucous membranes, eyes, rinse immediately with plenty of running water for 10-15 minutes. Seek medical attention if necessary. Danger: Possible irritant effect on the skin. Storage and transportation: Transport and store at temperatures from + 5 ° C to + 40 ° C, in a hermetically sealed original container, separately from food, in a cool ventilated room, out of the reach of children and animals. Avoid heating and direct sunlight. The composition retains its properties after short-term freezing. Dispose of in accordance with SanPin 2.1.7.1322-03 Shelf life: 24 months Composition: an aqueous solution of active target antiseptic components
قراءة المزيد

Anti-Mold for Wood - 63097

في الأوراق المالية
3.2 USD/قطعة 3.2 USD

أجل الحد الأدنى: 12 шт

القدرة على التسليم: 1000 шт/في اليوم

LLC ALTERKHIM-PRO
مورد لم يتم التحقق منه
روسيا
معلومات الشحن

احسب واستكمل نقل البضائع الخاصة بك إلى أي مكان في العالم باستخدام Qoovee Logistics.

شحنة مضمونة في الوقت المحدد ودفع آمن احسب الشحن من Qoovee

منتجات مماثلة

المورد:
"Узлегпром"
اكتب لنا ، نحن متصلون بالإنترنت!