مواد البناء بالجملة على Qoovee

admissible total deformation up to 15% coated with RAL UZ 123 (Blue Angel) without solvents, phthalates, glycols, APEO-, isocyanate- and silokones Free of organohalogen and organotin compounds Ready-to-use one-component acrylate-based sealant with improved elasticity ... Water soluble, lightfast, low odor, solvent and phthalate free. For filling joints and cracks inside and outside of premises on plaster, concrete, masonry, drywall, wood and chipboard, stone, absorbent ceramics, aluminum and corrosion-resistant metals. It is also especially suitable for joining the sealing joints of wooden and metal window frames, for shutters, internal and external window banks, aerated concrete, concrete and wooden elements, partitions. Not suitable for permanently wet loads. Consumption approx. 12.5 m2 for 5 mm x 5 mm connection Color white

Excellent workability with solvent-free coating. Ready-to-use, one-component, acrylate-based sealant. Water soluble, lightfast, low odor, solvent and phthalate free. For filling joints and cracks indoors and outdoors, only slight movements can occur on plaster, concrete, masonry, drywall, wood and chipboard, stone, absorbent ceramics, aluminum and corrosion-protected metals. Not suitable for wet loading. Consumption about 12.5 m2 for a 5 mm x 5 mm connection

solvent-free fast drying anti-corrosive Dispersion filler, solvent-free. Very fast drying repair filler, good filling, rust inhibition, low pollutant content, no cracks up to 1 mm wet layer. High productivity. Can be layered several times in a short time and is very good for sanding. Color white

breathable, pre-cement. Low-load, breathable, mineral-white, cement-based, manual filler. Can be used indoors and outdoors. For smoothing, improving and filling facades, as well as improving cracks and holes in walls and ceilings. Substrates can be masonry, concrete, plaster and other mineral substrates.

ready to work resistance to weathering excellent water repellency permeable Ready to work, with paste, synthetic resin thin layer plaster (finishing plaster) .. Thin plaster with etched or corrugated structure, white or colored, for external and internal use. Can be processed by hand or by machine. Organic binder, mineral fillers, color pigments, additives, water. Protection and design of facades and interior wall surfaces on old and new mineral plasters and fillers, on concrete, for the processing of organic interlaced fillers and plasters, as a final coat for all thermal insulation systems, as well as on repair plasters. Weatherproof, very good water-repellent, permeable, washable, glossy colorant, can be heavily mechanically loaded, easy to process. Observe the lightness values ​​(HBW) (at least 25!) For use in thermal insulation systems or thermal insulation plasters. Consumption 1.5 mm grass structure 2.5 kg / m², 2 mm pickling compound 2.9 kg / m², 3 mm pickling compound 3.9 kg / m², 2 mm slotted structure 2.8 kg / m², 3 mm slotted structure 3.9 kg / m², Quality assurance: Own control by our own factory laboratory. Third party monitoring of ongoing production control by a notified body.

for almost all substrates Sd value of carbon dioxide> 50 m resistant to heavy rain conforms to EN 1504-2 High performance, universally applicable pure acrylate paint. Permeable to water vapor, but waterproof, high elasticity, not chalk, alkali-resistant, film-preserved. Excellent adhesion to mineral substrates such as concrete, masonry, plaster, fiber cement, old elastic systems, wood, non-ferrous metals, rigid PVC, etc. Outdoor. Proven CO2 barrier for concrete repairs according to EN 1504-2. Consumable layer for fine gypsum grain from 100 to 150 g / m², for coarse gypsum grain from 150 to 250 g / m², the exact consumption depends on the substrate and processing. Color Base white, colorless. Can be painted in full, base and shaded colors using the Murexin mixing system.

  ELF - с низким уровнем выбросов и без растворителей содержит каолин высокое покрытие профессионального качества без растворителей   Высокопрозрачная эмульсионная краска для всех типов помещений. Высококачественное покрытие для стен и потолков всех видов. Низкий уровень выбросов и без растворителей! Содержит каолинит. Профессиональное качество. Испытано в соответствии с EN 13300: Мокрое истирание: класс 3.   Расходоколо 150 - 200 мл/м² на слой Цветбелый; может быть открашиваем точечным, базовым и тонированием цветов

  ELF - с низким уровнем выбросов и без растворителей содержит каолин Класс влажного истирания 2   Скрабоустойчивая, каолинсодержащая внутренняя эмульсионная краска, в лучшем декорируемом качестве, с высокой степенью покрытия. Награжден Австрийским экологическим знаком. Мокрое истирание: класс 2; Непрозрачность: Класс 1.   Расходоколо 150 - 200 мл/м² на слой ЦветБазовый белый, бесцветный. Может быть окрашен в полноцветные, базовые и затененные цвета с использованием системы смешивания Murexin.

water-thinnable good resistance suitable for tank floor coatings Silky matt water-thinnable concrete coating, solvent free, very good adhesion to concrete floors, abrasion resistant, good coverage. Weatherproof, resistant to water, cleaning agents, fuels, mineral oil, dilute acids and solutions, and numerous chemicals in the medium to long term. Suitable for painting and roller application. Ideal for covering concrete floors, screeds in basements and utility rooms, laundries and other wet areas, oil collection trays. Outside for covering balconies and terraces, concrete stairs, etc. Not suitable for garage floors. Finished material: silver gray RAL 7001 and gray gray RAL 7032. Tinted in the shade in groups 1 - 4. Tintable in 113 RAL and 209 MUREXIN Eurocolors & Essence of Colors color tones. Consumption approx. 200 - 250 ml / m² per coat Gravel gray, silver gray

  премиум титановая белая краска высокое содержание твердых веществ быстрое высыхание отличный расход   Шелковый глянец премиум-класса белой краски на специальной алкидной смоляной основе с высококачественной пигментацией диоксида титана. Высокое содержание твердых веществ и быстрая сушка обеспечивают эффективную работу с отличным потоком, хорошим покрытием краев и высоким покрытием поверхности. В помещении и на открытом воздухе для атмосферостойких, износостойких верхних скобок на дереве, металлах и минеральных подложках (обратите внимание на предварительную обработку подложки). Прореживание с помощью KH тоньше TE 300.   Расходоколо 100 - 150 мл/м² на слой. Точный расход зависит от субстрата и обработки. Цветбелый

ventilation block resistant good flow can be tinted Silky gloss ventilation special alkyd resin varnish with excellent flow, fast drying, good edge coverage and high surface coverage. No aromatic substances. Indoors and outdoors as a weatherproof, moisture-regulating primer, intermediate and topcoat on dimensionally stable and dimensionally limited dimensionally stable wooden windows, doors and soffits, as well as intermediate and topcoats on metals and rigid PVC (note substrate preparation). Consumption approx. 100 - 150 ml / m² per coat Color White, basic colorless. Can be tinted with the Murexin MIX24 system.

High protection against rust for undercoats and coats. Weatherproof. Non-puffy, silky matte 3-in-1 anti-corrosion paint. Primer, rust protection and topcoat in one product. Non drip, high rust protection, weather resistant, easy to handle. One coat for iron, aluminum and fresh or weathered zinc surfaces such as gutters, garage doors, tin roofs, etc. Do not use thinners for treatment if possible. Clean instruments with Oxylin AF 200 nitro toner. Consumption approx. 100 - 150 ml / m² per coat Color oxide red, reseda green, silver gray, anthracite gray, sepia brown, white

The active anti-rust pigment is recoated after about 1 hour. lead-free and chromate-free, active primer free from rust, dry fast. Can be recoated after a short time with synthetic resin paints. As a rust protection primer for iron parts, iron gates, steel structures, vehicles, machines, etc. Consumption approx. 150 - 200 g / m² per coat Color gray green, oxide red, white

  высокий охват хороший поток   Глянцевая краска из синтетической смолы, без ароматических веществ, проста в работе, глянцевая, светостойкая, ударопрочная, ударопрочная, очень хороший поток, отличная непрозрачность, быстрое высыхание, длительный срок службы, хорошая атмосферостойкость. Для декоративной внутренней и наружной росписи из металла и дерева, например на окнах, дверях, мебели, перилах, воротах и т.д. Цветовые тона подходят в качестве радиаторной краски для систем подогрева воды до 90°C. Прореживание с помощью KH тоньше TE 300.   Расходоколо 100 - 150 мл/м² на слой

good edge coverage shockproof No yellowing, excellent coverage as well as good edge coverage. Radiators can be turned on immediately after the coating has dried. Very good adhesion, elasticity and impact strength. High-coverage white paint, protected from yellowing, for painting water and steam heaters up to +120 ° C. The radiator paint gives an enamel-like high gloss finish. Consumption about 100 ml / m² per layer

ready-to-use non-bribery reinforcement for leveling absorption based on hydrosol Ready-to-use non-pigmented deep primer based on high quality acrylic hydrosol. For embedding and deep priming. Hardens slightly sandy substrates and leads to absorption equalization for highly absorbent substrates. Low emission and no solvents. Consumption about 100 - 200 ml / m²

- good priming effect high yield water dilutable Solvent free, water dilutable primer concentrate based on high quality acrylate. Good soil effect, high yield, environmental friendliness. For strengthening sandy and highly absorbent substrates, obtaining a uniformly absorbent substrate, and promoting adhesion of subsequent coatings both indoors and outdoors. Dilution up to 1: 4 with distilled water, depending on the nature of the surface. Consumption about 150 - 200 ml / m² per layer Colorless

water thinnable weather resistant fast drying Water thinnable, matt polyurethane acrylic paint with excellent processing properties. Shock resistant, scratch and shock resistant, very good flux, high coverage. For interior and exterior matt finishes for high quality coatings on wood, metals, rigid PVC and mineral substrates (note substrate pretreatment). Tinted in the shade in groups 1 - 4. Tintable in 171 RAL and over 40,000 other shades. Consumption approx. 100 - 130 ml / m² per coat Color White, transparent base. Can be tinted with the Murexin MIX system.

Oil-free impregnation for exterior wood surfaces. Good drying, high permeability, good weatherability (pearl effect) and weatherability. Resistant to bacteria and fungi. Mix container well, keep container tightly closed after use. Remove dust, dirt, grease and wax from wood. Treat with a brush, roller or sprayer. Consumption 250 ml / m² per coat Color natural brown

high coverage primer for efficient performance for sandy and absorbent substrates White, solvent-free, dispersion based primer. High quality titanium dioxide for high coverage. For indoor and outdoor walls and ceilings. For subsequent coating on dispersion and silicon resinous base. Do not use on highly absorbent or sandy substrates. Ideal as a base coat for dry lining. It can also be used as a top coat. Consumption approx. 100 - 150 ml / m² Color

ready to process waterproof low pollution permeable Ready to process, paste-like, thin-layer synthetic resin render for onlays and decorative elements. Etched thin plaster, white or colored, for indoor and outdoor use. Can be processed by hand or by machine. Water-repellent, weather-resistant, permeable, washable, low tendency to contamination, easy to process, universally usable. Consumption 1.0 mm grass structure 2.0 kg / m², Quality assurance: Own monitoring by our own factory laboratory. Third party monitoring of ongoing production control by a notified body.

ELF - Low Emission and Solvent Free Wash Resistance Ideal for Improvements High Span High Whiteness Dispersion Ink. Ideal for enhancements thanks to its dull matte gloss and thin restorations. Water thinnable, low emission and solvent free. Wet abrasion: class 3. Consumption approx. 150 - 250 g / m² per coat Color white; can be colored with point, base and color shading

1. Ready to use 2. Wet abrasion class Ready-to-use paint for interior walls. Water thinnable, low emission and solvent free. For painting walls and ceilings in new buildings and for interior renovation. Optimized for application with airless sprayers. Wet abrasion: class 3.

Wear-resistant water-based insulating paint for insulating coatings on walls and ceilings on mineral substrates, as well as wood, non-ferrous metals and rigid PVC, both indoors and outdoors. Can be used as an adhesive and top coat on a variety of problem substrates. Consumption approx. 150 - 200 ml / m² per layer Color White; can be painted in full tones, base and shaded colors and in a color shade group, through the Murexin MIX system. EAN: 9002438120276 Art-Nr: 12027

Heat-insulating mixture - ready-made heat-insulating dry mixture for horizontal application. It is used to create monolithic thermal insulation screeds on the roof and indoors.

THERMOZON Ltd., a modern plant for the production of insulation, offers a 2 in 1 material in the form of thermal insulation plaster. Heat-insulating plaster & ndash; material for thermal insulation and wall plastering in one go. It is used on concrete surfaces, brick, aerated concrete, foam concrete masonry. THERMOZON provides a guarantee for its product.

The manufacturer LLC Topol offers to order an autonomous sewage system for a house for 6 people in Moscow. The model of a modern autonomous sewage station Topol 6 is designed for 6 people, that is, it allows you to clean sewage drains in houses and cottages where 5-6 people live.

Sandors and penstock Universal panel gates with manual and electric drives (general industrial and explosion-proof design), shandors (shield gates without a drive), are designed to overlap trays, openings in chambers, to shut off sedimentation tanks in emergency situations, as well as in case of repairs ... Can be used in any sewerage facilities (primary and secondary radial sedimentation tanks, grid buildings, pumping stations, digester tanks, etc.), water supply, drainage and irrigation systems, etc. At present, the production of any standard sizes of panel gates has been mastered, as well as modifications of `` ХТ '' & mdash; resistant to aggressive media (sea water, treatment facilities, channels of metallurgical and chemical plants, mine waters), made of stainless steel, ethylene-propylene rubber, bronze, etc. The plant is constantly working on the modernization of the design of the valves, the use of progressive materials in the direction of reducing material consumption and improving technical characteristics. The design of the shield seal has been developed, allowing its use in places with reversible fluid flows, the wedge lock method has been improved for greater tightness, the installation scheme has been tested without the use of concrete and improvements. Taking into account the wishes of the designers, emergency opening gates, bypass gates, gates with a semicircular threshold have been introduced into serial production. Simplicity of design, installation, durability, low prices, minimum production time, guarantees of uninterrupted operation have made it possible to successfully use panel gates of LLC `` Molot-Mechanics Plant '' at various structures in Ukraine, CIS countries and far abroad.

Direct deliveries of profile balcony systems from a manufacturer in Turkey ATU Export & Consulting LLC is our company in Turkey. Since 2015, we have been engaged in wholesale supplies. Clamp-and-slide system. It allows you to assemble the glass by sliding them to the side at the installation site, thus saving space in the interior and providing a larger area of ​​use. In tight spaces, the installation provides the opportunity for more efficient use of space. It does not interfere with the exit, thanks to the aluminum wicks, which are clamped at the points of glass connection, reduces the coefficient of glass stretch to zero, does not let water, wind and dust inside. The clamp-sliding series with a threshold and without a threshold for 2, 3 4 5 tracks makes it possible to open by sliding to the right and left from 2 to 10 glasses. Simplicity of manufacture and assembly is achieved due to the guide cover at the connection points of the vertical profiles. It is used for winter gardens, glass windows and various types of balconies by connecting 2 or more L, U-shaped and straight (90 ° -270 °) panels. The system can use heat-saving glass units 8 and 10 mm and 4 + 12 + 4 Minimum shipment volume: 1 container Terms of delivery: EXW, FOB, CFR, CPT, CIF Terms of payment: a) 30% + 70% after inspection by an accredited surveyor b) cash settlement - prepayment after the buyer checks the products at the warehouse in Turkey c) Bank guarantee (the decision to release the products under the bank guarantee is taken individually) Working with ATU Export & Consulting LLC: 1. Direct deliveries from Turkey; 2. Strict quality control of products at each load (presence of a qualified expert representative); 3. Availability of international certificates and product declarations; 4. Compliance with manufacturing technology; 5. Compliance with the terms of the contract and delivery time. For more information on the different Alkon product lines and quote quotations

Direct deliveries of profile balcony systems from a manufacturer in Turkey ATU Export & Consulting LLC is our company in Turkey. Since 2015, we have been engaged in wholesale deliveries Showcase system Designed specifically for shopping centers, shops, cafes, fast food zones, summer cottages, pastry shops, parking lots, swimming pools, etc. Windows can be opened in the desired direction with a single roller. The panels in the system can slide in both directions. The system is suspended and moves on the top frame and aluminum tracks. Saves space and provides 85% protection against wind, rain, dust and inclement weather. The system uses 10 mm tempered glass Weight of the system glass: 25-28 kg / m2 Maximum system height: 380 cm Thermal insulation: 70% Minimum shipment volume: 1 container Terms of delivery: EXW, FOB, CFR, CPT, CIF Terms of payment: a) 30% + 70% after inspection by an accredited surveyor b) cash - prepayment after the buyer checks the products at a warehouse in Turkey c) Bank guarantee (the decision to release products under a bank guarantee is taken individually) Working with ATU Export & Consulting LLC: 1. Direct deliveries from Turkey; 2. Strict quality control of products at each load (presence of a qualified expert representative); 3. Availability of international certificates and product declarations; 4. Compliance with manufacturing technology; 5. Compliance with the terms of the contract and delivery time. For more information on the different Alkon product lines and quote quotations

Direct deliveries of profile balcony systems from a manufacturer in Turkey ATU Export & Consulting LLC is our company in Turkey. Since 2015, we have been engaged in the wholesale supply of the Prokon Series made of shaped aluminum. The frame profile is designed as double track to accommodate double bearings. The bases of the Procon system are compatible with 8 mm tempered glass. The system is available in standard colors: anodized (natural), white, bright bronze (215 different color options). In this system, the installation can be done both from the top and from the bottom. The Alcon Procon system has 5 important features: 1. Glass balcony with gutter 2. Glass balcony with steam channel 3. Glass balcony with child lock 4. Glass balcony with aluminum seal 5. Glass balcony with double track. Minimum shipment volume: 1 container Terms of delivery: EXW, FOB, CFR, CPT, CIF Terms of payment: a) 30% + 70% after inspection by an accredited surveyor b) cash settlement - prepayment after the buyer checks the products in a warehouse in Turkey c) Bank guarantee ( the decision to release products under a bank guarantee is taken individually) Working with ATU Export & Consulting LLC: 1. Direct deliveries from Turkey; 2. Strict quality control of products at each load (presence of a qualified expert representative); 3. Availability of international certificates and product declarations; 4. Compliance with manufacturing technology; 5. Compliance with the terms of the contract and delivery time.

Direct deliveries of profile balcony systems from a manufacturer in Turkey ATU Export & Consulting LLC is our company in Turkey. We have been wholesalers since 2015. Isykon's cold-resistant series of profiled aluminum with insulating glass units has been designed with 50% better heat savings compared to 8mm glazed balconies. The insulating glass units used in our Isykon balcony system are 30 mm (4 + 22 + 4). The system is compatible with straight, L, U-shaped and all kinds of corner balconies. Minimum shipment volume: 1 container Terms of delivery: EXW, FOB, CFR, CPT, CIF Terms of payment: a) 30% + 70% after inspection by an accredited surveyor b) cash settlement - prepayment after the buyer checks the products in a warehouse in Turkey c) Bank guarantee ( the decision to release products under a bank guarantee is taken individually) Working with ATU Export & Consulting LLC: 1. Direct deliveries from Turkey; 2. Strict quality control of products at each load (presence of a qualified expert representative); 3. Availability of international certificates and product declarations; 4. Compliance with manufacturing technology; 5. Compliance with the terms of the contract and delivery time.

Direct deliveries of profile balcony systems from a manufacturer in Turkey ATU Export & Consulting LLC is our company in Turkey. Since 2015, we have been engaged in wholesale supplies The Isykon + Plus cold-resistant series of shaped aluminum with heat-saving insulating glass units has been designed with the ability to save heat 50% better compared to 8-mm glazed balconies. The use of a glass unit of the Isykon + Plus series will keep the room temperature on the balcony with a heat-saving glass unit 4 + 16 + 4. Minimum shipment volume: 1 container Terms of delivery: EXW, FOB, CFR, CPT, CIF Terms of payment: a) 30% + 70% after inspection by an accredited surveyor b) cash settlement - prepayment after the buyer checks the products in a warehouse in Turkey c) Bank guarantee ( the decision to release products under a bank guarantee is taken individually) Working with ATU Export & Consulting LLC: 1. Direct deliveries from Turkey; 2. Strict quality control of products at each load (presence of a qualified expert representative); 3. Availability of international certificates and product declarations; 4. Compliance with manufacturing technology; 5. Compliance with the terms of the contract and delivery time.

VDE professional tool set

VDE professional diagonal cutting plier

high quality

High quality and reasonable price

High product quality

Nippers, also known as pliers, are of different types. It is used in crafts, industry and life.

Nippers, also known as pliers, come in different varieties. It is used in crafts, industry and life.