دردشة مفتوحة

مواد البناء بالجملة على Qoovee

MIESAUOPT
ألمانيا
USD 450.0 - 470.0/шт
suitable for laying parquet, tiles and natural stone safer on problem substrates relieves stress Relief of tension reinforcing fleece for laying parquet, tiles and natural stone, especially on problem substrates. Can be used as a reinforcing underlay under solid parquet and ready-to-install parquet, as well as on all conventional, ready-to-install substrates. Especially for use on poor, low-strength substrates and in the renovation sector for dry screeds, chipboard and mastic asphalt. Color white
MIESAUOPT
ألمانيا
USD 90.0 - 105.0/шт
easy to spread a wide range of applications economical application Odorless, high quality dispersion adhesive. Indoor only, for bonding homogeneous, PVC, floor and wall coverings into tiles and membranes, and for textile floor coverings with latex smooth foam and latex stamped backs, latex backs or polyurethane foam backs. Suitable for underfloor heating systems and wheel loads. Consumption approx. 300 - 450 g / m², depending on the substrate and the back of the covering
MIESAUOPT
ألمانيا
USD 50.0 - 57.0/шт
fiber-reinforced rigid adhesives and high dimensional stability high initial adhesion short flash times universally applicable Very low emission dispersion adhesive, solvent-free, fiber-reinforced dispersion adhesive with high initial adhesion and rigid adhesion grooves for increased dimensional stability requirements ... Minimized residual indentation behavior. Indoor only for adhesion of PVC, designer coatings and PVC-CV coatings in membranes and boards, rubber coatings in membranes and boards up to 3.2 mm. Consumption approx. 250 - 350 g / m², depending on substrate and back cover
MIESAUOPT
ألمانيا
USD 115.0 - 123.0/шт
fast coating ability high early and final strength universally applicable saves storage costs through universal use Very low dissipation, high quality, extremely adhesive multi-functional adhesive for flexible and textile floor coverings. For homogeneous and heterogeneous PVC coatings in sheets, PVC designer coatings in boards and tiles, linoleum coatings, rubber coatings up to 4 mm, textile coatings with all common substrates, as well as light needle coatings. Consumption PVC, designer coatings, CV, rubber sheets in sheets: scalloped A2 approx. 280 - 330 g / m², linoleum, cork: scalloped B1, B2 approx. 330 - 370 g / m², needle fleece, woven fabric, carpet with second back: notched B2 approx. 330-370 g / m²
ELEGANT MIKS-BO'YOQ
Ташкент, أوزبكستان
USD 3.0/шт 3.0
Gypsum plaster. Thickness 3-10 cm
MIESAUOPT
ألمانيا
USD 165.0 - 180.0/шт
very good depth effect bonding-restoring effect fast drying Easy to work primer for parquet floors. Good penetration characteristics reduce lateral adhesion. Indoors as a primer for subsequent sealing with all MUREXIN waterborne parquet varnishes. For use on all common local hardwoods. Consumable l: about 7 - 8 m² (video)
MIESAUOPT
ألمانيا
USD 120.0 - 145.0/шт
high occupancy very smooth finish glossy and satin finish Water-based parquet sealant based on high quality polyurethane-acrylic with very good processing properties. Forms a good housing and results in very good mechanical and chemical resistance values. Indoors for sealing wooden floors and parquet. The flow container (10 liters) is sufficient for 2 applications on an area of about 42 m²
MIESAUOPT
ألمانيا
USD 250.0 - 275.0/шт
high filling capacity very good processing properties Water-based, non-flammable, low odor, formaldehyde-free parquet seal with extremely high scratch and abrasion resistance and good pouring properties as well as excellent durability. Indoors for sealing wooden floors and parquet floors with medium to heavy loads. The flow container (10 liters) is sufficient for 2 applications on an area of about 40 m²
MIESAUOPT
ألمانيا
USD 225.0 - 243.0/шт
good mechanical strength good pouring ability smooth finishing Water-based, one-component polyurethane-acrylic based parquet sealant. Wear-resistant and well-filled surface. Indoors for sealing wooden and parquet floors with medium loads. The flow container (10 liters) is sufficient for 2 applications on an area of about 42 m²
MIESAUOPT
ألمانيا
USD 300.0 - 325.0/шт
high abrasion resistance very good chemical resistance for frequently visited parquet surfaces Water-based parquet sealant based on high quality polyurethane. Due to its high wear and chemical resistance, NX 85 has properties comparable to a two-component system. Forms a good body and has excellent technological properties. Indoors for sealing wooden floors and parquet. The flow container (10 liters) is sufficient for 2 applications on an area of about 40 m²
MIESAUOPT
ألمانيا
USD 16.0 - 20.0/шт
Eco-friendly water-based non-slip Non-slip water-based care product for sealed parquet and wood floors, sealed cork (closed cell), PVC and linoleum. The care product dries without polishing in a dirt-repellent, durable and non-slip film. In a room for initial and complete maintenance, as well as for permanent technical cleaning of parquet and all other wooden floors. Consumption Initial, complete care: approx. 30 - 40 ml / m² (= 30 - 50 m² / l)
MIESAUOPT
ألمانيا
USD 25.0 - 30.0/шт
simple treatment suitable for all water-based oiled wood floors. Solvent-free water-based maintenance oil for the repair and restoration of oiled wood floors. Ideal for surfaces treated with natural oil NP 90 Color to maintain and enhance the color tone. Increases the durability of the floor. In a room for initial, complete maintenance and maintenance of oiled parquet and wood floors, as well as for initial maintenance of oiled wood floors. Apply evenly with a polishing applicator or soft wool cloth. Avoid puddling and leaving soaked cloths on oiled wood floors (staining). Apply sparingly in an even thin layer. Consumption about 30 - 40 m² / l
MIESAUOPT
ألمانيا
USD 185.0 - 205.0/шт
Based on the latest nanotechnology high chemical resistance especially easy to clean extremely high abrasion resistance Two-component synthetic resin parquet sealant for environmentally friendly sealing of very heavily used wood floors and as a final sealant for synthetic resin coatings. Aqua Nano NT 100 is just as flexible and produces surfaces with extremely high scratch and abrasion resistance and excellent chemical resistance. According to ÖNORM, C 2354 corresponds to the highest resistance class C and has been tested for sliding behavior in accordance with DIN V 18032. The flow container (11 liters) is sufficient for 2 applications on an area of ​​about 42 m²
MIESAUOPT
ألمانيا
USD 110.0 - 131.0/шт
permanently elastic suitable for old floors suitable for joints up to 5 mm high filling capacity solvent-free water-based, solvent-free and permanently elastic joint sealant, especially for renovating old floorboards with very wide joints up to 5 mm. Reduces side adhesion. Only indoors for wood cement production by adding wood sanding dust. Suspended floors and nailed wood floors cannot be permanently sealed. Consumption1 liter, depending on the width of the hinge: 10 m²
MIESAUOPT
ألمانيا
USD 90.0 - 115.0/шт
optimal sanding fast drying solvent-free odorless Aqueous, solvent-free and free of wood cement odor. Fast drying and excellent sanding properties. Only indoors for wood cement production by adding wood sanding dust. For joint filling of parquet and other wooden floors with joint width up to 1.5 mm. Not suitable for floorboards and paving stones. Consumption of 1 liter is sufficient for 20 m² Color white
MIESAUOPT
ألمانيا
USD 100.0 - 115.0/шт
fast drying good pouring ability removes minor scratches for perfect end result Fast drying gelatin intermediate layer with excellent filling properties. Can be recoated with all Murexin Aqua waterborne parquet varnishes. Indoors as an intermediate layer or for filling small scratches and seams. Suitable for underfloor heating systems. Not suitable for priming raw wood. Consumption about 30 - 35 m² / kg
MIESAUOPT
ألمانيا
USD 60.0 - 80.0/шт
can be applied to all types of wood barrier effect fast drying reduce side adhesion Special barrier effect primer for extensive insulation from woody ingredients. The primer penetrates deep into the wood and forms the ideal surface for re-finishing with any MUREXIN waterborne parquet lacquer. Use indoors only. Especially for problematic and exotic woods. Provides natural, neutral wood intensification.
MIESAUOPT
ألمانيا
USD 8.0/шт 8.0
good cleaning effect burns without smoke and odor frost protection for windshield washer system Suitable for home use and DIY. For cleaning tiles, glass, chrome, etc. It can also be used in industry and by hobbyists as a solvent. Can be used to clean tools when handling MS products.
MIESAUOPT
ألمانيا
USD 32.0/шт 32.0
high strength for existing surfaces matt Transparent matt seal for interior wall areas exposed to high chemical and mechanical stress. Ideal for dispersion coatings in kitchens, hallways or children's rooms. Low emission and no solvents. Consumption about 150 ml / m² per layer
MIESAUOPT
ألمانيا
USD 8.0/шт 8.0
fast drying fastness up to 650 ° C Fast drying solvent based painter color. Odorless and heat resistant for indoor use. The indoor silver color has good adhesion and heat resistance (up to 650 ° C). For coating ovens, chimneys, radiators, steam pipes, steam boilers, etc. Consumption approx. 100 ml / m² per coat Color silver
MIESAUOPT
ألمانيا
USD 29.0/шт 29.0
ready to process suction compensation adhesion enhancement Ready-to-use primer. Organic binder, silicone additives, mineral filler, additives, water-binding medium and suction compensation ensure uniform coloration of the final coating, additional water repellency of the substrate. Universal primer for both outdoor and indoor use. Consumption about 0.20 - 0.25 kg / m² when filling, about 0.40 kg / m² on a plaster base with one coating, Quality assurance: Self-monitoring by our own factory laboratory. Third party monitoring of ongoing production control by a notified body. Color white
MIESAUOPT
ألمانيا
USD 37.0/шт 37.0
Premixed, mineral powder adhesive and wall mortar (filler) for indoor and outdoor use, with high adhesive strength. Water absorbent and easy to process. For adhesion and reinforcement of ENERGY White / Gray and XPS insulation panels and for filling and unloading load-bearing plasters and concrete surfaces. For nominal thicknesses from 3 to 5 mm. Consumption adhesion: about 4 -5 kg ​​/ m², Filler: about 3.5 - 4.5 kg / m², Cement, organic binding medium, sand, additives. Quality Assurance: Own monitoring by our own factory laboratory. Third party monitoring of ongoing production control by a notified body.
MIESAUOPT
ألمانيا
USD 21.0/шт 21.0
high performance textured matt surface can be tinted High performance, premium color with good coverage for demanding interior surfaces. Ease of processing, for uniformly structured, dull matt surfaces. Low emission and no solvents. Wet abrasion: Class 3 Consumption approx. 100-150 ml / m² on an even substrate
MIESAUOPT
ألمانيا
USD 19.0/шт 19.0
ready-to-use high filling power easy handling Ready-to-use white hand-held filler for versatile indoor applications. High filling capacity and pliability ensure smooth and precise processing of light sandy finishing aggregates. For standard filling work on indoor walls and ceilings, but also best suited for grouting works as well as for butt and surface filling. Layer thickness: up to 5 mm at each stage of work. Consumption approx. 1.5 kg / m² per layer mm Color white
MIESAUOPT
ألمانيا
USD 16.0/шт 16.0
ELF - Low Emission and Solvent Free Contains Kaolin High Coverage Quality, preformed, well-coated interior wall paint for walls and ceilings of all kinds. Low emission and no solvents! Contains kaolinite. Tested in accordance with EN 13300: Wet abrasion: class 4. Consumption approx. 150 - 200 ml / m² per coat Color white; can be colored with point, base and color shading
MIESAUOPT
ألمانيا
حدد السعر USD 0 0
-PRICE IS CALCULATED PER SQUARE METER 1.50EUR / M2 Alkaline-resistant fiberglass for reinforcement (arms) of fillers. Component for the production of reinforced walls (reinforcement layers) for thermal insulation composite systems and in-wall systems.
MIESAUOPT
ألمانيا
USD 47.0/шт 47.0
High Coverage Eco-Friendly Low Emissions & Solvent Free High quality sports court lining color with good coverage and high yield. Water thinnable, low emission and solvent free. Resistant to rain and frost. Remains after mowing the grass, does not affect the growth of the grass and is harmless to plants, animals and groundwater. For renewing white field markings on sports or football pitches. Consumption of 15 kg is sufficient for 3 complete markings. Consumption amounts quoted may vary depending on substrate and processing methods. The exact consumption values ​​must be determined on site. White color. Orange (RAL 2004) can be toned by adding Murexin Full tone color VF 4000 orange. To do this, add 1 kg of full color VF 4000 to 15 kg Sports court pad SC 16.
MIESAUOPT
ألمانيا
USD 37.0/шт 37.0
ready to use for efficient processing high whiteness Ready to use, paste in a standard quality white filler spray. Suitable for indoor walls and floors, for general filling jobs such as joints and surface fillings, as well as for filling structures. High whiteness and maximum filling capacity thanks to the use of a high quality combination of filling materials. Layer thickness: up to 2 mm at each stage of work. Consumption approx. 1.75 kg / m² for filling a surface with a layer of 1 mm, approx. 0.5 - 1 kg / m² for structural filling Color white
MIESAUOPT
ألمانيا
USD 41.0/шт 41.0
for layers up to 5 mm thick for efficient machining of machines for non-standard substrates Very high filling capacity, ready-to-use organic compound for spray filler for internal machining. The product is ready to use. Can be easily processed over large areas, especially on rough substrates. The material remains permeable to layers up to 5 mm thick and can be cut into a flat surface ready for painting or wallpapering. Indoors, for filling holes and joints in walls and ceilings, as well as for thick-layer surface fillings on uneven substrates. Layer thickness: up to 5 mm at each stage of work. Consumption about 1.75 kg / m² for a layer thickness of 1 mm Color white
MIESAUOPT
ألمانيا
حدد السعر USD 0 0
aroma-free high dissolving power good cleaning effect High-quality cellulose dilution without aromatics.
MIESAUOPT
ألمانيا
USD 40.0/шт 40.0
high yields thanks to lightweight aggregates can be processed manually or by machine for non-compressive layers ≤ 5 mm. Highly efficient paste-like aggregate for manual and machine processing indoors. The special combination of fillers allows a wide range of applications. The material can be applied in layers up to 5 mm and can be leveled. High quality lightweight filler allows easy troweling and drying with little shrinkage. Consumption approx. 1.5 kg / m² for a layer thickness of 1 mm Color white
MIESAUOPT
ألمانيا
USD 122.0/шт 122.0
high coverage high permeability wash fastness High quality natural silicate color for rooms with high coverage and range. The highly permeable coating allows breathable exchange of moisture with the substrate, thereby preventing mold and algae. Water thinnable, low emission and solvent free. For high-quality wall and ceiling coverings in new buildings and during interior renovations. Consumption approx. 100 - 150 ml / m² per coat Color White. Possibility of tinting with the Murexin MIX system
MIESAUOPT
ألمانيا
USD 27.0/шт 27.0
based on natural lime base high permeability improves indoor climate DURAPID CA 480 finely divided lime aggregate is a powdered fine lime based aggregate for manual and machine processing indoors. For production, the smooth areas of the fillings are diffusion opened, which contribute to the regulation of humidity and, thus, a comfortable room climate. Consumption approx. 1.2 kg / m² per mm of layer thickness Color white
MIESAUOPT
ألمانيا
USD 16.0/шт 16.0
UV protection, weather resistant Deep action, solvent based wood glaze. Reduces UV exposure to wood and protects against weathering. Excellent weather resistant protection is guaranteed by a special combination of binders and selected lightfast pigments. Suitable for gates, shutters, timber lags, soffits, wooden fences, panels, log cabins, etc. Consumption of planed wood: about 70 - 100 ml / m², unplanned wood: about 100 - 160 ml / m² Colorless (indoor), pine, larch, oak, chestnut, teak, walnut, rosewood
MIESAUOPT
ألمانيا
USD 15.0/шт 15.0
Solvent-based protection for domestic and tropical hardwoods and conifers. Weatherproof Solvent-based impregnation of transparent woods. Deep impregnation of wood protects wood from weather and moisture. Contains protection against blue stains and mildew. Suitable for indoor and outdoor wood surfaces. Consumption about 80 - 100 ml / m² per layer Colorless
MIESAUOPT
ألمانيا
USD 14.0/шт 14.0
Fast Dry Weather Resistant Fast drying solvent based artist color suitable for indoor and outdoor air-absorbing. It has very good adhesive strength on stone and good weather resistance. It is mainly used for gilding grave inscriptions, for gold plating on stone monuments, etc. Consumption about 100 ml / m² per layer Colored gold paint
MIESAUOPT
ألمانيا
USD 10.0/шт 10.0
decorative coating fast drying Fast drying solvent based painter color only suitable for indoor use because the acid and hydrogen sulphide content in the air discolours bronze. Suitable for decorative coatings on many substrates. Consumption about 100 ml / m² per layer Colored gold paint
MIESAUOPT
ألمانيا
USD 136.0/шт 136.0
high strength Crack-breaking, high resistance, non-combustible, no harmful substances and can be of any color. Innovative glass fabric construction for decorative and durable indoor wall designs, especially in areas of heavy use. Reinforcement and finishing in one. It is very economical as it can be used on almost any surface without time consuming preparation.

يساعدك موقع Qoovee الرسمي على إبرام صفقات مربحة ، والعثور على مورد ومصنع لتنمية عملك. في قسم "قاعدة الموردين" يمكنك أن تجد كل ما تحتاجه لنفسك: مواد البناء من روسيا وقيرغيزستان وكازاخستان وتركيا وأوكرانيا ودول أخرى يتم تحديث فئات المنتجات باستمرار وتبقى ذات صلة. يهتم موردو الجملة بمشتريات الجملة والشراكات وهم على استعداد للتعاون المفيد

اكتب لنا ، نحن متصلون بالإنترنت!