المنزل واللوازم المكتبية بالجملة على Qoovee

In the category of industrial LED luminaires, there are products designed for use as light sources in industrial buildings, warehouses, in various kinds of storage facilities, etc. Luminaires ranging from 50 to 500 watts have excellent characteristics for lighting these types of premises. Tightness and effective heat dissipation properties allow the use of this equipment in poorly ventilated rooms, as well as in rooms with high temperature and humidity. When purchasing, you must select the type of reflector and color temperature parameters. These lighting fixtures are equipped with three types of reflectors. The type of reflector should be selected based on the estimated area of ​​the light coverage, the installation height and the number of installed lamps in the area of ​​the illuminated room. The widest coverage angle is provided by a device with a 120 ° deflector, respectively, the narrowest coverage angle for a 45 ° deflector. By color temperature, they are divided into three types: Warm (2700 -3500K) Natural (4000-4500) Cold (5700-6500) The luminaire is fixed to the ceiling using a mounting eye bolt directly to an anchor bolt or through a chain or a cable. Due to careful, professional selection of components and high-quality assembly, Svetlov industrial LED lamps will serve you for the full declared period without any maintenance. Custom-made production is possible.

Office lights and lamps

In conditions of regularly increasing prices for electricity, the issue of its saving is always relevant. Judge for yourself: in connection with the transition to a social norm of electricity consumption, every inhabitant of our country becomes a "hostage" of a certain limit of kilowatt hours, exceeding which is fraught with double or triple payment for overruns. The usual incandescent lamps are unlikely to help us "fit" into the framework proposed by the state, because of which the waste of money on electricity can increase significantly. We offer you the obvious and most optimal way out of this situation: you need to abandon the gluttonous incandescent lamps and replace them with LED lamps for the home, which you can buy from us. LED lamps for the home - real saving your budget According to statistics, it takes about 170 kWh to illuminate one apartment of a standard layout with conventional LNs. The use of LED lamps for the home reduces electricity consumption to 18-25 kWh, i.e. the difference between these indicators is 8-10 times! At the same time, the consumer of electricity does not lose at all in the quality of lighting: all the energy consumed by the light bulb turns exclusively into light, and not into heat, as is the case with LN. Having opted for LEDs, you will appreciate: a clean spectrum of their radiation, characterized by the absence of ultraviolet and infrared rays in its range, their long service life, reaching 11 years of continuous operation, environmental friendliness of materials used in their manufacture, product strength, high brightness, no flicker effect, proven by clinical trials carried out in the factory, < li> insignificant response to voltage fluctuations in the network, low inertia, due to which the LED lamp turns on at full power instantly. Significant price difference between LED lamps and standard incandescent lamps creates a certain barrier to their purchase by consumers. But the efficiency of electricity consumption by diodes is confirmed not only scientifically, but also by the practice of some European countries adhering to the strategy of minimizing expenses for housing and communal services. LEDꞌ lamps for the home are a choice worthy of respect Presented in In our catalog, LEDs are located on a copper substrate for better heat exchange with the cooling surface, which significantly improves heat dissipation and improves the life of the devices. If you buy an LED lamp on a copper substrate, then for 10-12 years it will work flawlessly every day for 14 hours a day! So, with Svetlov Plant you will successfully replace: incandescent lamps with a power of up to 100 W - LED lamps of the corresponding cap (E14 and E27), halogen analogs with a consumption power of 30 to 50 W - MR16 lamps (3-5W). We are always ready to answer additional questions that you may have during your acquaintance with LED products. You can ask them via e-mail or by phone on the website.

Nizhny Novgorod has a modern lighting market: it presents a variety of products, the most popular and demanded among which is the LED. Comparing the performance characteristics of different light sources, experts use qualitative and quantitative indicators, as well as the reliability and durability of the device. To ensure the maximum life of the LED, as well as its correct operation, it is important to choose a power source that meets all the technical characteristics. Maksiled stores offer a wide range of LED panels for lighting large areas. POWER SUPPLY FOR LED AND LED TAPE: BASIC REQUIREMENTS Reliability; Electromagnetic compatibility with light source; Safety; Energy efficiency. SERVICE LIFE Considering that the operating period of the light diode is not less than 50 thousand hours, the service life of the power supply of led bulbs must correspond to the declared quality. EFFICIENCY Products based on LEDs are an innovative energy-saving technology. In this regard, in order for the entire LED system not to lose its efficiency, the efficiency of the device must be maximized. Note: This is the only element that interacts with the electrical network, which is why the electrical safety of the lighting the system completely depends on the design features and technical parameters of the power supply. HOW TO CHOOSE THE POWER SUPPLY FOR LEDS There is a certain order of selection. Required determine the type of device - power supply or driver. Power supply with voltage stabilization. Power supply with current stabilization (driver). Determine the power of the device. You will need to calculate the total power of the entire circuit that is connected to the electrical network. It is important that the power of the power supply is equal to or exceeds the obtained value. The main principle of choosing a driver is that the device must correspond to the power and currents of the LEDs. The body of the device must be made of material resistant to mechanical and climatic influences, capable of withstanding moisture and temperature extremes. If the power supply is to be operated in difficult conditions, its case must have a certain protection class, indicated by two letters - IP and two numbers. < / ul> We would also like to invite you to familiarize yourself with our assortment LED lamps from leading manufacturers at competitive prices!

Flexible LED strip-a unique gift for all professionals and designers, which allows you to implement a variety of complex lighting projects. This is an additional lighting element in the room, which can become a real "highlight" and an original decor. The scope of application covers interior design, decoration of advertising signs, organization of lighting in the premises and on the street.SCOPE OF USE OF LED STRIPThe device is a flexible circuit board, on a flat surface of which diodes are fixed at an equal distance. Proper operation is ensured by resistors, the main task of which is to limit the current passing through the semiconductor. Each element is connected by conducting paths. Power to the entire system is provided by special adapters. The main function of the adapter is to convert the voltage coming from the electrical network to an acceptable voltage for the lighting device-12 or 24 watts.They differ in the color scheme and intensity of the glow. Nizhny Novgorod has specialized stores where you can buy LED strip white, blue, green and red.The white version has the largest number of shades: < li>cold – the radiation is slightly bluish, corresponding to a color temperature of 10000 oC; < li>a normal white shade, equal to a temperature of 3500-5500 oC;< / li>a warm shade of white, corresponding to a temperature of 2700 oC.< / li>< / ul>To solve certain problems, a simple device with monochrome radiation is not enough, in this case, you can organize the illumination with a model that reproduces different colors. This is the most versatile solution – in this case, each light bulb reproduces one of the monochrome shades-blue, green and red. Depending on the amount of each of the shades, a certain color is formed when mixed.WHERE IS THE DIODE TAPE USED?Automotive sphere< / li>Diodes are installed in the headlights of vehicles. Such illumination is not a whim of the motorist and not an idle desire to decorate the car, but a very specific requirement of the traffic police. By the way, the use of such lighting devices in headlights is much more economical than the usual incandescent lamps, and their operational period is much longer.If there is a desire to give the car a personality, it is enough to install a red LED strip or any other color under the body.Note: < / strong> The special feature of such lighting devices is their resistance to vibration, that is why this method of lighting is especially appreciated by motorists. < strong>Advertising sphere< / li>In stores, the tapes are used to focus on products or certain areas of the room. With the help of a red or green model embedded in signs and billboards, you can significantly expand your target audience.Home lightingDecorative lighting of the aquarium, ceiling, and interior of cabinets.In the kitchen, the use of diodes allows you to create a comfortable environment for cooking.Additional illumination of the TV or computer monitor. Watching movies in the dark negatively affects a person's vision, as the sharp contrast between a dark room and a glowing screen causes a burning sensation and a sting in the eyes. That is why the low-power lighting will create a comfortable environment for the eyes. It is best to place the light source behind the TV, in the case of a computer, you can simply stick it to the back of the monitor.Repair of computer equipment. When the lamps that illuminate the screen fail, they are changed to LEDs. At the same time, such castling does not affect the image quality, moreover, the durability of the backlight increases. The only drawback is that the installation will require a technical revision of the monitor circuit.The light in the room. Ordinary lighting can easily be transformed into the main light source, it is enough to distribute the LEDs on the ceiling above the level of the stretch ceiling. The advantage of such lighting is the ability to adjust its intensity.Night illumination. If you evenly distribute around the perimeter of the room, for example, a blue model of low brightness, it will perfectly replace the night light.Emergency lighting. For this purpose, red light diodes are best suited. The service life of this option is several times longer than any other.Street lighting. Some models are reliably protected from climatic events. They are installed along the paths in the garden, from the house to the gate.< / li>< / ul>< / li>Note: < / strong> such devices provide a powerful, bright glow without the use of additional light filters, which are usually quite bulky. In addition, the ribbon illumination saves the use of electricity, reduces the load on the network and the battery.< / p>WHAT KIND OF LED STRIP CAN I BUY IN THE STORETypes of diodes - SMD 3528; - SMD 3014; - SMD 2835; - SMD 5050.< / li> < p>The numbers indicate the dimensions in millimeters-3.5 by 2.8 and 5.0 by 5.0, respectively.The accompanying elements are resistors and pads where the wires necessary for power supply are connected.Note: < / strong> Any model is constructed from segments with a dividing line drawn between them. It is on it that the tape is divided into segments of the desired length.Color Management< / li>In the case of the monochrome version, the contacts are simply signed - " + "and" -", these symbols determine the polarity and sequence of connecting the device to the power source. < p>There are four outputs for color:< / p>"+12" or "+24";< / li>"R";< / li> "G";< / li>"B".Note:< / strong> If you connect the same pin value to the "+" pin of the power supply, and connect the minus pin to the same value of any letter, the ribbon will glow with the same color you selected. If you want to control each shade, use a special controller.Fasteners< / li>On the reverse side of all devices there is an adhesive material by which the lighting device is attached to any surface. The main thing is to pre-clean it from dust and degrease it.Versions< / li>In the simplest model, the diodes are not additionally protected. It can be used exclusively in residential areas with low humidity levels. Unprotected LEDs should be installed in such a way that they are not touched and not once again touched.For rooms with special operating conditions (high humidity, extreme temperature conditions) , we recommend purchasing a device with a special coating that prevents the penetration of moisture, dust and protects against the effects of extreme temperatures. The cost of the LED strip with a protective layer is higher, but the money spent will pay off with high reliability and durability.Note: < / strong> a special gel or polymer composition is used for the coating. In addition to the protective function, the coating plays the role of a lens that diffuses light.METHODS FOR CONTROLLING THE BACKLIGHT RIBBONThe control of light diodes involves:< / p> < li>brightness control;< / li> < li>setting the desired shade.< / li>< / ol>In order for the entire system to work smoothly, without failures, evenly and efficiently, it is important to correctly select the associated equipment, which is conditionally divided into four groups:Power supply;< / li>Controller-it is used to adjust each shade;< / li>Dimmer – required to adjust the brightness of the radiation;Power amplifier-it is installed to maintain the operation of the controller and dimmer in the case of connecting a high-power system.< / li>< / ol>POWER SUPPLY< / h3>The main function is simple activation.The principle of operation is to convert the voltage of the household network (220 V) into the voltage or current required for LEDs.Connection method – one device is connected to one adapter. When there is a need to connect two or more at the same time, use the parallel connection principle for power supplies with voltage stabilization and serial for power supplies with current stabilization. It is important to remember that the unit is designed for a certain power and load that the LEDs create. That is why, when planning a lighting system, it is important not to exceed the permissible limit and make a margin of 20%. To calculate the maximum block limit, you need to multiply the power of one LED element by their number.Maksiled stores offer a wide range of < a href="" title="Catalog power supplies">power supplies < /a> that provide the maximum service life of LEDs. < h3>RGB CONTROLLERThe control controller is used to control the glow shades. Using the remote control, a certain intensity and power of each base color is set. In accordance with this, the LEDs are supplied with the set voltage. As a rule, the remote control allows you to choose the mode of smooth change of shades or one of the built-in modes. < h3>DIMMERThe part is necessary to adjust the brightness of the glow. Consumers often ask – why can't a conventional variable resistor be used? The answer of experts: the correct operation of the lighting device, first of all, depends on the incoming voltage. By simply lowering the voltage value, you can turn off the lighting system. The brightness depends on the duration and frequency of the pulse current – the more often the LED flashes, the brighter and richer the radiation. With a decrease in the frequency and duration of the pulses, the radiation becomes dimmer.Note:< / strong> such blinking when controlled from the controller is not perceived by human vision.

LED backlighting modules are widely demanded in the advertising field, and are also used to organize a lighting system outdoors and indoors. Such a diverse scope of application is due to the excellent performance of the equipment, a simple installation scheme, economy and practicality. With their help, you can quickly and effectively implement the most complex design and technical projects in the lighting of shops, shopping centers, landscaping and residential premises. LED MODULE LED - WHAT IS IT? For LED lighting modules are characterized by the following technical parameters: the number of LEDs, on average, each consists of two or three LEDs; LED type; LED size - depends on the specific type of device; dimensions may vary and are determined in accordance with the personal preferences of the client; voltage - as a rule, this parameter is 12 V; protection class - considering the wide range of applications and operational features, the equipment is protected by IP class; section color - can be monochrome or multi-colored (blue, red, yellow or green). TYPE OF LED MODULES Four types are used in the construction: DIP LED dy. Inside the structure there is a special lens, the main part of which is a crystal that forms a luminous flux. The device is equipped with two leads. Piranha. The main feature of the design is the presence of four leads, thanks to which the reliability and quality of installation are significantly increased. It is rarely used. SMD LEDs are the most popular and demanded. Technical features - compact dimensions, light weight, large selection of models. They are produced using surface mounting technology, which means that the LEDs are fixed to the surface of the board. COB LEDs. Technical feature - the chip is mounted inside the board. Thus, it is possible to significantly increase the reliability and durability of the entire structure, since the contact is protected from oxidation and other negative external influences. WHAT IS IT USED FOR? Outdoor advertising A bright, attention-grabbing sign will surely interest the target audience. The use of LED modules for creeping lines is a successful and effective marketing solution that can be used to: distinguish a product from competitive products; attract new potential customers; attract new business partners. Organization of indoor lighting. Lighting of fountains, architectural objects. Landscape design. < / li> OPERATING FEATURES Efficiency LED modules for advertising use energy as efficiently as possible, compared to conventional lighting devices, energy consumption is five to six times less . Long operational period In addition, it is reliable and does not require repair work throughout the entire period of operation. Practicality The use of devices based on LEDs can significantly reduce the overall budget of the advertising campaign. Versatility < p> Easily fixed on any surface - vertical or horizontal, while you can use tape or glue. Reliability The system is resistant to any kind of dirt, weather and mechanical stress. WHAT CAN I BUY LED MODULES FOR OUTDOOR ADVERTISING? There are a lot of modifications, but the main ones are three. The main technical difference is that the front part remains dark, in other variations the font is illuminated. This model is rightfully considered the most elegant. Edge-lit glass with diodes Used to create a luminous composition on the windows. It is used to decorate shop windows with exquisite multi-layered stained glass windows, in which each layer has its own individual shade. Dark lettering A cost-effective and durable alternative to neon signs. Volumetric, effectively illuminated letters will serve for many years without the need for additional maintenance and repair work. Light boxes They differ in a variety of shapes and sizes. The light source is placed inside such a box. Such equipment is distinguished by the maximum degree of reliability and protection from any external factors. LED display Multifunctional design, as it can be used to advertise goods and communicate important information to the target audience. Two modifications of the display: Scrolling line - differs in the minimum amount of electricity consumption; Stella - is used to display the cost of goods and the list of services. MEDIA FACADE DECORATION In large metropolitan areas, light modules are used to create exclusive, original images on the facades of buildings without changing the structure of the structure. The dimensions of such a media facade vary from 50 sq. meters up to five thousand square meters. meters. The main detail of the media facade is clusters, which are blocks with two to four diodes inside. The price of LED modules for creating unique lighting solutions for building facades is much lower in comparison with any other design options. Note: quality and the durability of the media facade largely depends on the correctly selected technical characteristics of the cluster, namely, the pixel pitch. The minimum value is 100 mm. The higher the resolution, the clearer and brighter the image. ADVANTAGES high brightness - the image is clearly visible at a distance of 70 meters; constant dynamics and lighting effects - potential customers attracts movement, change of information and images; the ability to change information at any time, make adjustments. RULES OF SELECTION Selection in in accordance with the size of the letters. for small letters (from 15 to 30 cm high) and signboards in the design of which thin light legs are provided, small devices with densely spaced crystals are suitable; for letters from 50 to 120 cm high and more than 10 cm deep, medium-sized devices with three crystals are used; optimal choice for large boxes with a depth of more than 10 cm and large letters - with four. First of all, you need as much specific information about the finished lighting device as possible - the size and depth of the font, the material of the faces the surface of the letters. Basic principles of selection: Illumination. Organizations in the city of Nizhny Novgorod use, as a rule, store signs or creepers with a brightness from 1200 to 1800 Lux. Signs of standard brightness are decorated with 3528 crystals. If more bright sign, 5050 is better. 5730 and 2835 LED modules allow you to create signs with maximum brightness. They are high performance, powerful, and are used in regions with difficult climatic conditions. To upgrade your lighting system, you can purchase RGB LED Amplifier in our store. WHAT YOU SHOULD KNOW ABOUT LEDS? What housings are used to make LEDs. The basis is: 3014; 3528; 5050; 5730; 2835. Marking (numbers) means its dimensions in millimeters - 3.5 x 2.8 mm , 5.0 x 5.0 mm and 5.7 x 3.0 mm. The more, the brighter the light it emits. COMPARATIVE CHARACTERISTICS Module Luminous flux, Lm 3014 18 to 33 3528 30 to 33 5050 60 to 66 5730 105 to 120 2835 60 to 130 < li> What material is used for the production of the case There are two types of plastic: - PVC - a more economical option; - ABS - this type of plastic is more expensive, but it has the best performance characteristics - it removes heat from crystals, is resistant to temperature extremes, and is durable. There are also two production technologies. The first involves the manufacture of a completely cast body. According to the second technology, the devices are mounted in a plastic box and covered with a layer of protective varnish. The cost of such diodes is somewhat lower, but they are also reliable and durable. Sizes There are many different sizes. As a rule, LEDs with the same number of crystals are produced in several variations. The most popular - with three, with similar performance characteristics can be: short case - crystals are installed tightly; elongated case - mounted at a distance; square body - mounted in a triangle. Depending on the shape, the installation method is chosen, for example, devices with a short body are preferable to use with dense packing of modules, and if the size of letters and depth are large, it is rational to use with elongated body. Note: Small devices with two crystals are installed in small signboards, as well as in structures of complex shapes, where there are many corners. How to understand the class protection All devices have an IP protection class, that is, they are protected from dust, mechanical action of solid objects and moisture. These requirements are established by international quality standards. After the letters, two numbers are indicated - the first of them means the degree of protection against exposure to hard objects, and the second - the degree of protection against moisture. Characteristics: IP20 - the product is protected from small objects, but not resistant to moisture; IP54 - the product is resistant to dust and minor splashes of water; IP65 - the product is impervious to dust and can withstand impact of a small stream of water; IP67 - a product with a sealed casing that can be mounted in the immediate vicinity of motorways and immersed in water. You can buy not only high quality LED modules, but also LED lamps of famous brands. We invite you to the Maxiled online store!

LED street light Pandora LED 520W-120

Table extension mechanisms

Keys and Keys

latches

Castles

Амортизаторы для шкафов и ящиков

Lifting mechanisms

ZMV-PRO press for assembling GRASS NOVA PRO boxes Device for assembling GRASS NOVA PRO boxes Template for guides Template for installing hinges and strikers Conductor Template for attaching the facade to lifting mechanisms Kinvaro F-20, S-35, L-80, T- 65

Ultra Slim LED Lightboxes Attracting the attention of potential customers is the main goal of any business. To make it bright and beautiful, ultra-thin LEDison lightboxes will help you. Light, sleek and thin lightboxes look more advantageous than paper posters. Style and respectability are their distinctive features. Interior designers could not pass by such tempting characteristics. From a tool for advertising professionals, they have transformed thin light panels into an art object that is the focal point of any room.

Calibers of the clamp are not adjustable , means of measurement and control of conformity of real dimensions of the surface of the location and shape of products, established by the regulations. The use of calibers for shafts, outer planes and dimensions is economically justified in serial and mass production. Calibers are divided into limit and normal. Calibers not adjustable < / u> - means of measurement and control of the conformity of the actual dimensions of the surface of the location and shape of products, established by the regulations. Executive dimensions: GOST 21401-75 Design and dimensions: GOST 18355-73, GOST 18356-73, GOST 18358- 93, GOST 18360-93, GOST 18367-93. Tolerances: GOST 2015-84

Terminal Enclosures

Programs for information terminals

INFORMATION TERMINALS

Sectional doors are an integral component of various building structures. They have found application within the framework of building structures, industrial facilities, as well as within private construction. The key difference that sectional doors have is that their leaf consists of several panels, which, moving along the guides, move from a closed vertical to an open horizontal position. Sectional garage doors have a number of advantages over other garage door options. The door leaf of such a gate includes several sections connected by steel hinges. The canvas, moving along the guides, goes under the ceiling, moving from a closed vertical position to an open horizontal position. This trajectory saves space (both in the garage and in front of it) and maintains the original dimensions of the opening

Plastic windows their optimal cost, also rich functional characteristics only amaze in a pleasant way, modern owners of houses and apartments - plastic windows can be equally successfully used as in private country houses, mansions, cottages, and in high-rise buildings, in city apartments.

To buy reliable and high-quality blinds in Saratov, suitable for certain technical requirements for installation, and coinciding with your desires, first you need to decide on the types of blinds and roller blinds produced by ABC, in another way the latter will be more correctly called - roller blinds or roller blinds. Photos of fabrics and blinds and roller blinds you can see in the Swatches tab. Roller blinds are a separate class of sun protection systems, which are described in the article called - Roller blinds (look for it in the site menu). Here we will consider only blinds, and believe me there are a lot of complete sets and types of blinds. In order for you to better imagine what kind of blinds AVS produces below I will lay out a "tree" of types of blinds in Saratov from the manufacturer . VERTICAL BLINDS Fabric With photo printing Plastic < li> Aluminum Interlaced lamellae Arch Groover Inclined HORIZONTAL BLINDS Classic 25 mm Classic 16 mm Wooden 25 mm Wooden 50 mm Isotra or horizontal cassette blinds SUNSHIELD FAADE BLINDS WINTER GARDEN BLINDS PLISSE Describe each type blinds on this page makes no sense, since there is already information for each type of blinds, just look for the type of blinds you need in the drop-down menu from the "blinds in Saratov" tab of the site. As you can see, we produce quite a lot of types of blinds blinds in Saratov, if we also take into account that, for example, for vertical blinds we offer more than 1000 colors of fabrics and materials, then this choice will become even larger, however, we will write about materials for making blinds on this page, but just below. So, we are very close to the next item in our article about blinds - "Prices for blinds in Saratov".

Creeping lines - production Own production, highly qualified personnel and a well-oiled technological process of manufacturing allow Vostok-Led to fulfill any, even complex orders, in just 1-3 days. The high quality of the LED information boards we produce is confirmed by the corresponding Russian and foreign certificates. Our running lines, the production of which was mastered many years ago, work smoothly regardless of weather conditions. They will last a really long time, since we repeatedly check the quality of LED modules and components intended for assembling an advertising board, and test them additionally. All Vostok-Led products have a warranty of 1 year or more. Accumulative and wholesale systems of discounts operate. LED digital display creeping line Digital displays are designed to display indicators transmitted by measuring devices, exchange rates, time, queues at the doctor's office and the like. They are most widely used for displaying results and other information in various open and closed sports facilities. It is used in the form of a conventional, but more often combined or universal scoreboard. It is used for a wide variety of sports. Any digital scoreboard, even a non-standard solution, will be manufactured by us in terms of 1 day. Vostok-Led employees will perform the entire cycle of work on order - from the creation of the project itself to the installation of the finished product. The customer is only required to express his own wishes and announce the planned budget. Our specialist will offer several options for the scoreboard in just a few minutes.

Indoor LED screens Indoor LED screens have the following features: high resolution, allowing comfortable viewing at close range; completely silent work; no need for active cooling.

Our business card holders are very popular among buyers from catalogs for offices, such as Komus, Office Planet, etc. A wide range of business card holders (from 28 to 320 business cards), cover colors (8 colors) and cover materials (PVC or leatherette, under the fabric, colored). They are attracted by high-quality dense files that come with business card holders. The files are dense and therefore have a long service life, and if they are replaced or supplemented, the files can also be bought from us. On any business card holder, we can offer personalization with a logo or a commemorative inscription, which will be a pleasant gift for corporate clients. The DPS company offers you a large selection of business card holders and their personalization of its own production.

Notebooks with a ring mechanism and a block in a cage. Different colors, PVC cover, thick cardboard inside. The cover of this notebook will last a long time, just remember to change the block! You can purchase separately covers for notebooks, without blocks.

The special design of the cursor does not allow the window to jump off the tape holder. Each cursor is equipped with an elastic band with hooks already on. There are several holes on the belt, this allows you to adjust the width of the belt. There are three types of cursors for each type of block (mini, midi, maxi). Cursors in four window colors, available from stock. We can also make quarterly calendars to order.

Store racks

Chipboard counters

The company "TOB.RU" LLC is glad to welcome you among its customers

We sell materials for easy installation of advertising, which have unique properties and have recently gained great popularity among well-known trade brands. NOVAfilm ferrofilm is used in conjunction with a magnetic base. The magnetic base is applied to any smooth surface where frequent ad changes are expected. Next, magnetic base magnetised NOVAfilm ferrofilm with printing. It is possible to change the look of the store in seconds with the help of NOVAfilm ferrofilm. You can apply up to five coats of ads about sales and promotions directly on the current design, which undoubtedly attracts the eyes of buyers! NOVAlight silicone film on micro-suction cups - no glue (!) , is an alternative to self-adhesive films. It is used to decorate smooth surfaces where temporary placement of advertising is required, for example - showcases, elevators, columns, etc. The film adheres perfectly to the surface (Warranty - a year!), And subsequently can be easily removed from the surface, leaving no traces and dirt, leaving the surface perfect ... It is used for advertising design of any format: from small stickers to thousands of square meters. Technological features of the materials allow you to: Assembly / disassembly in seconds Re-registration of hundreds of stores in an extremely short time Eliminate damage to property / showcases / columns / elevators, etc. Save budget / time / effort < wbr> lia / nerves Simplify the logistics / algorithm for changing advertising graphics / control and setting tasks for changing advertising

Upholstered office chairs of superior comfort are offered by Techservice LLC CHAIRS for office, home Techservice LLC offers high-comfort soft office chairs. On our website you can buy office chairs wholesale and retail at the best prices. We manufacture office chairs and armchairs using the latest technologies. Order furniture via the Internet, and you will receive a 5% discount (only for St. Petersburg). We offer chairs in a wide range of different colors and designs. When making furniture, we take into account all the wishes of the client, you can independently choose the color of the upholstery and painting. Modern equipment makes it possible to manufacture office chairs in any quantity in a short time. Any office furniture, armchairs from Techservice LLC has all the necessary certificates.

Medical furniture manufactured by Techservice LLC has all the necessary certificates Medical furniture is one of the main areas of production activity of our factory. Medical furniture from the manufacturer Techservice LLC is inexpensive, of high quality and has all the necessary certificates. Production is located in St. Petersburg (St. Petersburg), there is a branch in Moscow and representative offices in Nizhny Novgorod and Rostov-on-Don. Production of medical furniture in our company in the following directions: - medical couches (examination, for massage) - folding and stationary massage tables - stands for droppers, stands for infusion - chairs, stools and laboratory chairs on a screw support and on a gas lift - functional medical beds, bedside tables and side tables - medical screens, tool tables - tables and chairs, sofas and benches for visitors Medical furniture can be made in different colors, in accordance with the wishes of the customer. We can also produce custom furniture, according to the customer's sketches. Medical furniture (beds, tables, couches, etc.) is purchased for installation in hospitals, clinics and other medical institutions. In view of the peculiarities of the operation of medical furniture (the product is constantly used by people with partial or complete dysfunction), there are certain nuances in its production: the furniture is made of high-strength hypoallergenic materials that guarantee the safety of the patient and a long service life of the furniture. When designing medical furniture, our main task is to guarantee comfort for the patient: functional beds, bedside tables, headrests for beds and other medical furniture provide the patient with maximum comfort with a minimum of effort due to their reliable movable structures. When ordering medical furniture in our company, you, first of all, have the opportunity to purchase everything you need in one place, as well as get exclusive conditions for cooperation. For trading organizations, online stores, for owners of retail space, we are ready to provide significant discounts on the medical furniture we produce. We also provide additional discounts for exhibition samples, all necessary photographs, technical descriptions, samples of materials and provide consulting support.

For better information perception and additional savings when purchasing, we have combined some tables and chairs into dining groups (or dining groups ). We sell Dining Groups at an additional discount, in certain color combinations. You can also buy separately tables and chairs in other colors, no additional discount is available. Dining group production ( dining sets ) we go in several directions: - dining groups for cafes - furniture for cafes, bars and restaurants - folding groups ( folding furniture sets ) - folding chairs and tables < br> For trading organizations, online stores, for owners of retail space, we are ready to provide significant discounts on the dining sets we produce. We also provide additional discounts on exhibition samples, all necessary photographs, technical descriptions, sample materials and provide consulting support.

For lovers of outdoor activities At the dacha, on the beach, on a fishing trip or on a picnic, you want to relax with maximum comfort. Folding chairs is one of the activities of the company "Zont". You can buy folding chairs in bulk at very attractive prices. The collection of folding chairs produced by our company is constantly supplemented and updated in accordance with the demands of the modern Russian consumer. Our folding chairs are of high quality, both materials and finished products. Tourism in Russia is very popular. The firm "Umbrella" produces many convenient and useful goods that will make such a vacation as comfortable as possible, therefore, an aluminum folding chair is an indispensable accessory for recreation in nature, fishing, picnics and even hunting, etc. With our furniture, some of your everyday problems will be solved, and you can simply enjoy a good rest in nature.

Tents for street trade - convenient and inexpensive equipment Possibilities of using structures Equipment for selling goods outdoors sites have a number of advantages, such as compactness, mobility and ease of assembly and disassembly. Currently, the most popular for organizing commerce on the streets of the city are stalls for street trading. You can get acquainted with the range of such commercial equipment manufactured by the "Umbrella" company directly on the website. To the main possibilities of using outdoor commercial stalls when organizing a business, you can include: permanent or seasonal trade in markets and fairs; implementation of various offsite trade; conducting promotional outdoor events; when holding various mass celebrations, for example, Shrovetide, city day, etc .; sometimes stalls for street trading are used as protective awnings for expensive equipment, for example, when organizing performances by artists in open areas; in the summer season around many restaurants and cafes tents or gazebos are installed for those clients who prefer to dine or dine outdoors. We can say that shopping tents are the simplest, most convenient and an inexpensive way to quickly organize a trading place in almost any conditions. Therefore, they are of interest to all entrepreneurs associated with street or market trade. Our company was founded in 1952, and in addition to the main products produces a wide range of street frame and tent trade equipment and is currently the leading manufacturer . Available technologies make it possible to produce almost the entire range of outdoor frame-tent equipment, namely: trade pavilions of any standard size, tents, cafes, modules for the sale of melons and gourds, as well as awning umbrellas, round and square, with a dome size of up to five meters. Frames for street trade equipment are made of steel square pipes from 20x20mm to 50x50 mm, depending on the size of the product, followed by painting with Finnish powder enamel. The stability of the quality of the manufactured metal frames for the specified equipment allows the company to increase the warranty period of their service up to three years. In the production of street trade equipment, only imported fabric is used in a wide range of colors, which guarantees stable water resistance. The company also manufactures, at the request of the customer, any outdoor non-standard trade equipment. Available technologies allow printing on the entire surface of the fabric cover. We guarantee the highest quality, low prices for our range, according to compared with other firms producing similar equipment. Your business success is our common success. Tent assembly procedure: 1. Assemble the frame according to the diagram attached to the product 2. Throw a fabric cover over the assembled tent frame 3. Pass three pipes through the holes in the front of the cover and then into the pockets of the visor. 4. Evenly distributing the covering over the roof of the tent, lower the side walls and fix them on the tent frame. Packing: the length of the frame of the commercial tent in the packed form does not exceed 2.15m. (for Mod. 206 all modifications). The fabric cover is packed separately from the frame in a fabric bag. The framework assembly diagram is attached.

Fabric 100% polyester with water-repellent impregnation; steel rods, nickel-plated; needle length - 54 cm; plastic handle. Printed polyester fabric 100% with water-repellent impregnation; lightweight frame, steel rods, nickel plated; frame spokes combined using titanium alloys and high-strength polymeric materials; anti-wind system; needle length - 58 cm; assorted pens.

Features Medium-duty shelving racks are designed for manual handling of goods. Used in warehouses and industrial premises, sales areas. Withstand loads from 200 to 800 kg per shelf, depending on the type of selected beams. The frame is welded, the connection of the beam to the frame is hook-on. > A wide range of rack elements allows the most efficient use of the warehouse or store. It is possible to use chipboard, chipboard, MDF, plywood, etc. shelves in the rack. Step permutation of the shelf level - 50 mm. The elements of the rack are painted with polymer powder paint. The standard color is light gray, RAL 7035 shagreen. Can be painted in others colors according to the RAL catalog: 5017 blue, 3020 red, 1018 yellow, 6024 green extra charge.

Showcases and counters of the "LETO" series are an economical option for commercial furniture and are perfect for completing stores in the middle price segment. Features Versatility. Suitable for the widest range of goods. Economical Lightness and elegance of design, thanks to the use of glass and lighting Choice of chipboard color. Possibility of a mirror back wall. Possibility of completing with LED lamps. Including locks and adjustable supports. Showcases Summer are suitable for: tableware cups and awards souvenirs accessories costume jewelry cosmetics medicines alcoholic products

The assortment includes plastic and metal, universal, for coats and suits, trousers and skirts, blouses and light dresses, etc.