المعدات الكهربائية والمكونات بالجملة على Qoovee

Flat Copper braided Wire 1: Braided tapes copper is suitable for flexible electrical,conductive or electrical grounding wire use.2: It is made of greater than 99.95% pure copper3: Uninsulated braided flat wire Material: bare copper Standard design:The main electrical parameters of copper braided wire are DC resistivity (20 ℃) not more than 0.022Ωmm2 / m, and DC resistivity (20 ℃) of tinned copper braided tape not more than 0.0234Ωmm2 / m. Application：Copper tinned flexible braided wire is used for flexible electrical,conductive or grounding connection.It also used for non-horizontal live motion and as a power accessory in medium and low voltage circuit breakers.The construction of power distribution lines requires safety and reliability, maintaining power continuity, reducing line losses, improving transmission efficiency, and ensuring good power quality.

C Shape Copper Crimp Connector / Copper Clamp for Earth Rod C shape copper crimp connector also named C tap compression connector,it is used for copper tap and parallel connections of stranded copper cables in earthing system.CROP C shape copper connector has a full fange,the suitable section of conductor form 7.5mm2 to 895mm2.The CCT-895 is our new type customized by one of our customer. The C tap compression connector are made of extruded ‘C’ from copper with apurity greater than 99.5%.There are two ways of product surface treatment.one is puer copper surface,the other is copper tinned surface.Please check below product picture. MODEL SUITABLE SECTION OF CONDUCTOR(MM²) A H L B C CCT-10 7.5-14 9.5 6.2 12 1.6 4 CCT-16 14.5-16 11.8 7.8 13 2 5 CCT-20 16.5-20 12.8 9.7 13 2.9 5.4 CCT-26 21-26 14.7 10.9 16 3.2 6.5 CCT-44 27-44 19 14.4 20 4 8.5 CCT-60 45-60 21 15.1 22 4 9.7 CCT-76 61-76 24.4 17.6 22 5 10.8 CCT-98 77-98 27.8 18.8 25 5 12.8 CCT-122 99-122 29.8 21.2 26 5.5 13.5 CCT-154 123-154 34 24.4 28 6 17 CCT-190 155-190 37 25.4 35 6 17.4 CCT-240 191-240 40 28.5 40 7 19 CCT-288 141-288 44.5 31.1 45 7 22.3 CCT-365 289-365 47.5 34 50 7 24.8 CCT-450 366-450 57 41 60 10 28 CCT-560 451-560 62 45 65 11 31 CCT-700 561-700 68 49.5 70 12 34 CCT-895 630-895 72 45 66.5 12 31 C tap compression connector available to achieve earthing connections on copper type cable conductors with cross-section areas 10sqmm to 895sqmm – installed using appropriate ratchet, hydraulic or battery type crimping tools and associated die sets.

Mechanical Lugs-Cable Shoes shear bolt-termination Mechanical lugs and repair sleeves are designed for use in low and medium voltage applications. Only three sizes cover conductor sizes from 25 mm² to 400 mm². All products consist of a tin-plated body, shear-head bolts and inserts for small conductor sizes. Made of special aluminium alloy, these contact bolts are double shear head bolts with hexagon heads. The bolts are treated with a highly lubricating agent. Contact bolts are irremovable once their heads have been sheared off. The Lug body is made of a high-tensile, tin-plated aluminium alloy. The internal surface of the conductor holes are grooved. Lugs are suitable for outdoor and indoor applications and are available with different palm hole sizes. The bolted fitting featured herein was developed specifically for use in medium voltage cable accessories up to 42 kV. They may also be used in the 1 kV range. TYPE CODE CABLE RANGEMM2 DIA. OF MOUNTING HOLE DIMENSION(MM) NO.OF TORQUE BOLTS BOLTS HEAD SIZE L L1 D d AF LSA-25/95-13 LSA-1 25-95 13 74 60 24 12.8 1 13 LSA-35/150-13 LSA-2 35-150 13 100 86 28 15.8 1 17 LSA-95/240-13 LSA-3 95-240 13 129 112 33 20 2 19 LSA-120/300-13 LSA-4 120-300 13 140 120 37 24 2 22 LSA-185/400-13 LSA-5 185-400 13 160 137 42 25.5 3 22 LSA-500/630-13 LSA-6 500-630 13 175 150 50 33 3 27 LSA-800-13 LSA-7 800 13 195 165 55 36 4 27 FEATURES 1.Cable shoes shear bolt-termination designed to be connected on to a conductor to facilitate the termination of the cable without the need for crimping. 2.High tensile aluminium alloy or tin plated aluminium alloy. 3.Shear bolt technology to ensure a good electrical connection 4.Solid moisture block between palm and barrel 5.Smooth profile prevents damage to insulation or sealing sleeves 6.No elongation during installation 7.Wide application range

Features: model：FDS-ERF-3USA-2USB Available up to 4 ways outlet socket modules Body Diameter : 7.5 cm Aluminum alloy shell PC socket module, PA mounting bracket Length Adjustable Strong Aluminum body Customized socket module Hidden under the table when you don't need the sockets, it makes the table neat and tidy American Electric rise and fall type socket - 3ways American sockets - With2*USB - 15A, 125V~250V - 3G*16AWG*2meters Dimension: Cut out size: 75mm series

CL-H50-M1407 28 In One Smd 5050 160~170lm/W IP65 IP66 Fin Type 50w Led Module Zhejiang Changlux lighting Co., Ltd was established in 2002, leading High efficiency 160 lm/w 50W Module manufacturer and company. Factory accept OEM/ODM order and complete solution for your lighting project.

ORIGINAL AND NEW CHARGER  Suitable for all models that requires a 45W charger with 4.5mmx3.0mm plug   ALL NEW AND SEALED INPUT:100-240V OUTPUT: 19.5V 2.31A MODEL:  DA45NM140 HA45NM140 LA45NM140   POWER CORD NOT INCLUDED   Collection and viewing possible in our warehouse.

1.High quality, high density fins design 2.Customized fin height and width supported 3.Treatment and designs according to your ideal and drawing 4. Larger surface, more efficient than extruded profiles 5. Material: Aluminum or Copper 6. Special design 7.Larger surface, more efficient than extruded profiles 8. Material: Aluminum or Copper 9.Customized design supported 10.Compact construction for dissipating high power losses on smallest installation space 11.Heatsink geometries and fixed length optimal adjusted to the fan being used 12. Homogeneous heat dissipation 13.Mounting of the semi-conductor by means of sliding nut Shrapnel or specific snap-to-retaining springs 14.for transistors

10Ah 12Ah 17Ah 20Ah 24Ah 30Ah 40Ah 12V 24V 36V 48V 60V 72V Lifepo4 Deep Cycle 18650 Li-ion Li Lithium ion Rechargeable Battery 10Ah 12Ah 17Ah 20Ah 24Ah 30Ah 40Ah 12V 24V 36V 48V 60V 72V Lifepo4 Deep Cycle 18650 Li-ion Li Lithium ion Rechargeable Battery 12V 24V 36V 48V 72V 96V 7Ah 9Ah 14Ah 18Ah 45Ah 50Ah 60Ah 65Ah 70Ah 80Ah Lifepo4 China Lithium ion iron Phosphate Battery Price 3.7v 7.4v 12v 14.8v 22.2v 24v 72v 300mah 1020mah 5000mah 6000mah 8000mah 20000mah 22000mah 2s 4s 5s 12s lipo battery pack 18650 3.7v 1800mah 2000amh 2200mah 2600mah 3000amh li ion cylindrical cell rechargeable lithium ion battery 12V 24V 36V 48V 60V 72V 96V 11.6Ah Electric Bike Bicycle 52V 20Ah Ebike Ev Li-ion Lithium ion 18650 Battery Pack For Ebike

Transformers TM, from 63 to 1000 kVA from availability after revision or overhaul. 2 year warranty. Full package of documents and test report. The price is approximately 50% below the market price. Transformers are supplied both new, from storage, and revision (with the issuance of protocols of the established sample).

Transformer substations KTP-pole, mast, kiosk, heat-insulated we will manufacture according to the completed questionnaires and a linear diagram. To calculate the cost, you need a completed questionnaire and a linear diagram to our e-mail.

We offer: Subscriber service of computers and office equipment § Repair and modernization § Installing software § Removing viruses, data recovery § Configuring and maintaining servers § Configuring a local network § Installing Windows 7, 8, 10 Departure of a specialist on the day of contact! Single orders are possible!

Electric motors AIR, 5AI, AM, AMU, AD, 5A asynchronous general industrial. On feet, combined, flanged from a warehouse in Tver. Available from 0.55 to 45 kW at various speeds. The price is negotiable. Call. Asynchronous electric motors AIR, A, 4A, 5A, AD, 7AVER with a squirrel-cage rotor are used in almost all industries in electric drives of various devices, mechanisms and machines that do not require speed control. They are used to drive ventilation equipment, pumps, compressor units, machine tools, escalators and many other machines.

We carry out work on diagnostics, repair, assembly, full or partial installation, commissioning of control cabinets, telecommunication cabinets, server cabinets, electrical and electrical cabinets, etc. Installation work can be carried out both in accordance with the documentation developed by the manufacturer, and in accordance with the project documentation provided by the customer. We have many years of experience in using equipment from Rittal, DKS, Provento, Phoenix Contact, Weidmuller, Wago, Legrand, Schneider Electric, Lappkabel, Schroff, etc. All installed equipment is factory tested (technological run at least 72 hours). Experts will assist in calculating the equipment configuration based on the customer's technical specifications. Execution of works on APCS (development of RD, supply of control and management cabinets, SCADA, software, MO, AWP; installation; commissioning) on ​​a turnkey basis Execution of work on APCS (development of RD, supply of control and control cabinets, SCADA, software, MO, AWP; installation; commissioning) turnkey. We provide services for the assembly and integrated supply of instrumentation equipment and installation materials. We offer our Customers: Consultations, selection of the necessary equipment according to the Customer's specifications, services for alternative replacement of equipment, direct delivery of devices from the warehouse and on order.

Delivery and installation in the Tver region: Frequency converters ABB, ADT, Advanced Control, Bosch Rexroth, B&R; Automation, Danfoss, Delta Electronics, EasyDrive, Eaton, Emotron, ESQ, Eura Drives, Fuji Electric, Gefran, Grandrive Hitachi, Hyundai , IDS Drive, INNOVERT, INVT, Instart, Invertek Drives, KEB, Lenze, LS, Mitsubishi Electric, Omron, ONI, OptimusDrive, Parker, ProfiMaster, Prostar, Rockwell Automation, Santerno, Schneider Electric, Siemens, TECORP, Toshiba, Vacon, WEG, Yaskawa, ZIEHL-ABEGG, Vesper, Leader, Aries, OptimElectro, PolyusPlus, Ruselcom, Triol, Electrotex-IN. Soft starters ABB, Advanced Control, AuCom Electronics, Danfoss, Emotron, ESQ, Eura Drives, Instart, INVT, OptimusDrive, Prostar, Schneider Electric, Siemens, Toshiba, VT Drive, Vesper, Leader, Polyus, Plus OptimElectro, Electrotex-IN .

Electrical installation includes not only the preparation of plans, diagrams, dismantling of old networks, but also directly laying wires. The next stage is marking: The places of installation of various equipment, sockets, switches, and the passage of wires are marked on the surfaces. Pipes are being laid. Insulators are mounted, plug connectors, switches are fixed. Wires are laid and fixed. Disconnectors, electrical receivers, distribution boxes, socket boxes, etc. are installed. All cables and wires are connected. The specialist checks the connections, tests the new power grid. The final stage is the installation itself. During it, sockets, chandeliers, lamps, spots, power consumers are installed. Private electricians of our company provide an integrated approach, performing work from the very beginning to the end, guaranteeing an excellent result.

Industrial machine computer repair, Touch screen repair, Machine monitor repair, Machine control system repair, Screen repair, Touch screen repair, Touch screen repair, Touch screen repair, Touchscreen repair, Touch screen repair, Touch glass repair, graphic panel repair operator, repair of the operator's text panel, Repair of the operator panel illumination, Conclusion of an agreement Provision of a guarantee for the repair of an electronic device for 6 months. The cost of repairs ranges from 30% to 50% of the cost of new equipment.

We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!

We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!

We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!

We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!

We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!

Diagnostics of failures, repair of industrial electronics Diagnostics of controller errors. Any errors and problems associated with the incorrect operation of industrial controllers and operator panels arise, oddly enough, either with completely old equipment or not working for a long time (the internal power battery has run out), or with a power failure and interruption of the algorithm cycle. Repair of modules, control units, controllers (PL.C) Repair of operator control panels (HMI), industrial monitors. Industrial computer repair (IPC). Repair of voltage stabilizers. Repair of industrial UPS (UPS - Uninterruptible Power Supply). Repair of industrial blowers. Repair of frequency converters (inverters). Repair of servomotors (servomotors). Repair of sensors: encoders (incremental, absolute), resolvers. Repair of servo converters (servo drives, servo amplifiers). Repair of soft starters (soft starters). Repair of industrial electronic boards (printed circuit boards, etc.). Repair of components of CNC machine tools (CPU). Repair of industrial power supplies.

Diagnostics of failures, repair of industrial electronics Diagnostics of controller errors. Any errors and problems associated with the incorrect operation of industrial controllers and operator panels arise, oddly enough, either with completely old equipment or not working for a long time (the internal power battery has run out), or with a power failure and interruption of the algorithm cycle. Repair of modules, control units, controllers (PL.C) Repair of operator control panels (HMI), industrial monitors. Industrial computer repair (IPC). Repair of voltage stabilizers. Repair of industrial UPS (UPS - Uninterruptible Power Supply). Repair of industrial blowers. Repair of frequency converters (inverters). Repair of servomotors (servomotors). Repair of sensors: encoders (incremental, absolute), resolvers. Repair of servo converters (servo drives, servo amplifiers). Repair of soft starters (soft starters). Repair of industrial electronic boards (printed circuit boards, etc.). Repair of components of CNC machine tools (CPU). Repair of industrial power supplies.

Diagnostics of failures, repair of industrial electronics. Diagnostics of controller errors. Any errors and problems associated with the incorrect operation of industrial controllers and operator panels arise, oddly enough, either with completely old equipment or not working for a long time (the internal power battery has run out), or with a power failure and interruption of the algorithm cycle. Repair of modules, control units, controllers (PL.C) Repair of operator control panels (HMI), industrial monitors. Industrial computer repair (IPC). Repair of voltage stabilizers. Repair of industrial UPS (UPS - Uninterruptible Power Supply). Repair of industrial blowers. Repair of frequency converters (inverters). Repair of servomotors (servomotors). Repair of sensors: encoders (incremental, absolute), resolvers. Repair of servo converters (servo drives, servo amplifiers). Repair of soft starters (soft starters). Repair of industrial electronic boards (printed circuit boards, etc.). Repair of components of CNC machine tools (CPU). Repair of industrial power supplies.

Diagnostics of failures, repair of industrial electronics. Diagnostics of controller errors. Any errors and problems associated with the incorrect operation of industrial controllers and operator panels arise, oddly enough, either with completely old equipment or not working for a long time (the internal power battery has run out), or with a power failure and interruption of the algorithm cycle. Repair of modules, control units, controllers (PL.C) Repair of operator control panels (HMI), industrial monitors. Industrial computer repair (IPC). Repair of voltage stabilizers. Repair of industrial UPS (UPS - Uninterruptible Power Supply). Repair of industrial blowers. Repair of frequency converters (inverters). Repair of servomotors (servomotors). Repair of sensors: encoders (incremental, absolute), resolvers. Repair of servo converters (servo drives, servo amplifiers). Repair of soft starters (soft starters). Repair of industrial electronic boards (printed circuit boards, etc.). Repair of components of CNC machine tools (CPU). Repair of industrial power supplies.

LLC "R&D-TRADE;" Official distributor of Christmas garlands. At the moment, we can offer 2 types of garlands in bulk, 💥💥💥 - certification and white customs: 💥- 3x3 meters warm white rain ☀️ cold white - 8 modes, you can connect several garlands together. 🎊 300 diodes. Price RUB 645 VAT included. 💥- 3x1.5 meter figures (stars, trees, deer, bell). warm white☀️ - 8 modes, you can connect several garlands. 🎊 126 diodes. Price RUB 650 VAT included. Payment on account. Minimum order 300 pcs. They will be available for shipment by the end of October. From Moscow. Write to the mail to make an order

SD3 is a selfeeder drilling unit with an oil damper for air feed or hydraulic valve to control the feeding rate. The accuracy of spindle nose is strictly under 0.003mm and maximum drilling capacity up to 6mm (S45C). This unit allows to perform all types of machining applications such as drilling, chamfering, reaming and countersinking. Feature: 1.Standard 3-phase AC motor 0.4kW is included, optional maximum power up to 0.75kW 2. Belt driven at fixed speed and incorporate a Poly-V belt 3.Spindle taper ER16, JT1 and JT2 are available 4.Available for servo driven at variable speeds 5.OMRON proximity switch sensors and stand are furnished 6. AC Induction Motor protection IP 54

SSD03 spindle unit is designed servo feeding with ball screw grade C5 and servo motor, the accuracy of spindle nose is strictly under 0.003mm and maximum drilling capacity up to 6mm (S45C). This unit allows to perform all types of machining applications such as drilling, tapping, chamfering, reaming and countersinking.   Feature: 1. Standard 3-phase AC motor 0.4kW is included, optional maximum power up to 0.75kW 2. Belt driven at fixed speed and incorporate a timing, V or Poly-V belt 3. Feed rate is programmable and driven by preferable servo motor 4. Feeding is driven by HIWIN or PMI Grade C5 ball screw 5. Spindle taper ER16, JT1 and JT2 are available 6. Available for servo driven at variable speeds 7. OMRON proximity switch sensors and stand are furnished 8. AC Induction Motor protection IP 54

EROCORE commits to： • Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe. • Promote the prevention of pollution. • Continually improve the effectiveness of our environmental management system. Current Status：All EROCORE products are fully compliant with the RoHS Directive.   Product Manual: 1. Performance low resistance, high current rating. 2. Low loss realized with low RDC. 3. Low core loss.

EROCORE commits to： • Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe. • Promote the prevention of pollution. • Continually improve the effectiveness of our environmental management system. Current Status：All EROCORE products are fully compliant with the RoHS Directive.   Product Manual: 1. Low profile very effective in space-conscious applications. 2. Low resistance and high energy storage.

EROCORE commits to： • Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe. • Promote the prevention of pollution. • Continually improve the effectiveness of our environmental management system. Current Status：All EROCORE products are fully compliant with the RoHS Directive.   Product Manual: 1. Coating epoxy resin that ensures the humidity resistance to be long life. 2. Contribute to be high Q and self-resonant frequencies.

EROCORE commits to： • Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe. • Promote the prevention of pollution. • Continually improve the effectiveness of our environmental management system. Current Status：All EROCORE products are fully compliant with the RoHS Directive.   Product Manual: 1. High magnetic permeability. 2. Excellent saturation flux density. 3. Low power loss.

EROCORE commits to： • Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe. • Promote the prevention of pollution. • Continually improve the effectiveness of our environmental management system. Current Status：All EROCORE products are fully compliant with the RoHS Directive.   Product Manual: 1. Minimal effect on transmission waveforms. 2. Can be added as First-Aid, On-The Spot countermeasures when equipment or devices fail.

EROCORE commits to： • Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe. • Promote the prevention of pollution. • Continually improve the effectiveness of our environmental management system. Current Status：All EROCORE products are fully compliant with the RoHS Directive.   Product Manual: 1. Low profile alloy power inductor (Alloy Core) . 2. Magnetic shielded construction. 3. For new generation portable product D/D converter unit.

Wire Wound Inductors（Ceramic), RF Chip Inductor Series-NL   EROCORE commits to： • Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe. • Promote the prevention of pollution. • Continually improve the effectiveness of our environmental management system. Current Status：All EROCORE products are fully compliant with the RoHS Directive.   Product Manual: 1. Very strong solderability by reflow soldering and soldering iron or wave soldering. 2. Highly accurate dimensions can be mounted automaticlly. 3. Terminals are highly resistant to pull forces. 4. High reliable in environments of sudden temperature change and humidity. 5. Highly resistant to mechanical shocks and presure. 6. Superior Q characteristics and broadest selections amount peers.

EROCORE commits to： • Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe. • Promote the prevention of pollution. • Continually improve the effectiveness of our environmental management system. Current Status：All EROCORE products are fully compliant with the RoHS Directive.   Product Manual: 1. Pair and triple wire coil for high stability and high balance. 2. Available in tape & reel for automatic surface mounting.

EROCORE commits to： • Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe. • Promote the prevention of pollution. • Continually improve the effectiveness of our environmental management system. Current Status：All EROCORE products are fully compliant with the RoHS Directive.   Product Manual: 1. Closed magnetic circuit avoids crosstalk. 2. Suitable for flow and re-flow soldering. 3. Available in 5 sizes. 4. High frequency Chip Inductor with 100% Lead(Pb) & Halogen-Free and RoHS compliant.

Product manual: 1. Suitable for flow and reflow soldering. 2. Standard type used to suppress lower-frequency, lower current signals. 3. The products contain no lead and also support lead-free soldering.   Application: Removal of signal line noises of cellular phones, PCs, notebook PCs, TVs, TVs tuners, STBs, Audio players, DVDs, DSCs, Game machines, digital photo frames, PNDs, Car Navigation system, etc.

1.MATERIAL: 2. BODY:THERMOPLASTIC,UL94V-0. 3.CONTACT:COPPER ALLOY. 4.SPECIFICATIONS: 5. RATED CURRENT: POWER 20-70A AMP, SIGNAL 3AMP. 6. RATED VOLTAGE:500V DC.

1. MATERIAL: 2. HOUSING: THERMOPLASTIC, UL94V-0. 3. CONTACTS: COPPER ALLOY. 4. TECHNICAL CHARACTERISTICS: 5. RATED CURRENT: POWER 20-70 A, SIGNAL 3 A. 6. RATED VOLTAGE: 500 VDC.