The Pastukh-U electric cattle drive is intended for use in agriculture (collective farms, state farms, experimental livestock stations, farms) and meat processing enterprises (cattle reception and delivery points, slaughterhouses, meat processing plants, etc.) different types of livestock. The elongated drive body is especially effective when handling cattle. The Pastukh-U electric drive is a modern device that does not cause stress or injury to animals. The advantages of the "Pastukh" drive are a gentle mode of operation in which animals do not get injured, low cost, the ability to recharge from a household network. < br> The kit includes a charger that connects to the 220V network and charges the drive through the adapter. Specifications: Length of the drive, 800 mm Voltage on the electrodes, V 7000 Power supply, Four batteries D -0.55С at 1.5 V Action time until the next charge, h about 8 Diameter, mm 40 Weight, kg 0.65 Duration of operation of one set of batteries with the duration of each pulse 1 - 1.5 sec, inclusions 1000, 1500 For pigs and small cattle it is advisable to use the "Pastukh" drive, and for cattle, the "Pastukh-U" drive with an extended handle. Delivery set 1. Electric drive Pastukh-U (Shepherd) for cattle 1 pc. 2. Passport and technical description 1 copy. 3. Rechargeable battery D 0.55S 4 pcs. 4. Charger 1 pc. 5. Electric circuit 1 copy Battery charging ATTENTION! CHARGE ONLY AFTER A FULL DISCHARGE OF BATTERIES. Connect the electric drive to the charger through the socket, plug the charger into the mains. In this case, the signal LED should light up. A fully discharged battery is charged within 10 hours. Charging is carried out at an ambient temperature of 18 to 30 ° C. The electric drive is supplied with semi-discharged batteries, so before the first use it is recommended to charge the batteries within 5 hours. CHARGER TECHNICAL DATA Maximum load current, A 0.55 Output voltage, V 7 ± 1.2 Supply voltage, V 220 ± 22 Weight, kg (no more) 0.5 Number of simultaneously charged batteries, pcs ... 4 Dimensions, mm 61x58x86 ATTENTION! IT IS STRICTLY FORBIDDEN TO OPEN THE CASE! TO PREVENT ELECTRIC SHOCK, DO NOT TOUCH THE ELECTRODES WHILE THE DEVICE IS TURNED ON! hands of the driving wheel electrodes. Do not repair and disassemble the driving wheel if there are power sources in it. Operation safety is ensured by the use of plastic parts that structurally form the outer surfaces of the electric drive. Operation manual Before starting work, make sure in the operability of the drive, when the power button is pressed, the electric drive should emit a high-frequency sound. If there is no sound, charge the battery. When working, press the power button only when directly touching the animal's body. Do not drop the electric drive and hit it. Do not allow the space between the electrodes to become dirty. At the end of each work shift, remove dirt from the body and electrodes of the drive. When working with an electric drive in winter, at the end of each work shift, place the drive in a dry place (heated room) to restore the power supply. At temperatures below minus 25 ° C, it is recommended to use the electric drive for no more than two hours, as the batteries may fail. To restore the drive, it should be kept for at least 8 hours in a dry, heated room. Store between work the electric drive in a dry place without ammonia vapors. In the summer, do not leave the drive in direct sunlight to avoid overheating of the plastic parts. The drive can become unusable if used at temperatures above 85 ° C.