Компания «ДиПиПром», г.Александров

Specifications: Productivity, carcasses / h 5-18 Carcass processing time, min 2-3.5 Overall dimensions, mm 2400х1100х1500 Weight, kg 850

Installation for intestine cleaning B2-FOK is designed for processing of sets of casings of cattle, pigs, small ruminants. It is used in small and medium-sized meat processing plants. The casings supplied for cleaning must be preliminarily squeezed out and separated from fat. The cleaning process is divided into two parts. The first part is crushing, which is carried out on the first three shafts (rubberized, lamellar and metal corrugated). After that, the casings will fall into the pallet, with a hole for manual placement between the shafts for the second part of the cleaning process. The second part of the cleaning process takes place on the remaining four shafts, where slinging and final cleaning are carried out. After processing on this machine, the bowels are poured and calibrated. The FOK installation is the highest quality and most economical solution for cleaning bowels from domestic equipment. It has a number of advantages over analogues as a result of its design features. Compactness, all stages of processing are collected in one device. Versatility, allows you to handle all types of intestines. Economy, electricity consumption and water consumption are much less. Reliability is guaranteed by the quality of factory assembly and the use of quality materials and elements, including food grade stainless steel. Service life 9 years. Observing the correct technology, product cleaning is carried out using 7 shafts of different structure and relief, while there are fewer of them on other devices. Simplicity and safety of operation. Specifications: Productivity, qw / hour Cattle 350 Pork 250 < p> МРС 250 Installed power, kW 1.1 Hot water consumption, 34-40 С, m3 / h 2 Overall dimensions, mm 915 * 830 * 1385 Weight, kg 300

Equipped with a convenient bristle separator. The structure is made of acid-resistant steel. Technical characteristics: Productivity, carcasses / h not less - 20 Gross weight, kg - 800 Overall dimensions, mm - 2500/1000/1500 Consumed power, kW - 18 Oil heating

Productivity (heads per hour): from 15 to 20 Carcass weight (kg): from 50 to 150 Processing time (min): 2 - 3.5 Scalding temperature (° С ): 62 - 65 Drive power (kW): 2.2 Heating element power (kW): 18 Energy consumption, no more (kW / h): 20 Overall dimensions (mm) : 3220x1000x1480

Characteristics: Productivity (head / hour): from 15 to 20 Total power (kW): 21 Drive power (kW): 2.2 Pump power (kW): 0,75 Heating element power (kW): 18 Duration of carcass processing (min): 2 - 3.5 Pressure of pneumatic cylinders (pneumatic discharge) (atm): up to 6 Weight of processed carcasses (kg ): from 50 to 150 Number of working shafts (units): 2 Overall dimensions (mm): 3220x1000x1480 Bath dimensions (mm): 1970x800 Volume (liters): 300

Characteristics: Productivity (head / hour): from 15 to 20 Total power (kW): 21 Drive power (kW): 2.2 Pump power (kW): 0,75 Heating element power (kW): 18 Duration of carcass processing (min): 2 - 3.5 Pressure of pneumatic cylinders (pneumatic discharge) (atm): up to 6 Weight of processed carcasses (kg ): from 50 to 150 Number of working shafts (units): 2 Overall dimensions (mm): 3220x1000x1480 Bath dimensions (mm): 1970x800 Volume (liters): 300

Power chopper Consists of a frame, a chopping mechanism, a drive. The frame is a welded structure of channels and corners, on which the shredder body and drive are mounted. The shredding mechanism is a set of knives, nine of which are movable and twenty are stationary. The movable knives are fixed on the shaft with dowels so that their outer cutting edges form a discontinuous helical line. Fixed blades are bolted to the body. The shaft rotates in four radial bearings installed in the shredder housing. The axial load that occurs during operation is taken up by the thrust bearing. The shredder housing is a cast split structure, both halves of which (upper and lower) are bolted. The body is closed with an apron. The drive includes an electric motor and a gearbox, interconnected by a coupling. A loading chute is installed in the upper part of the body, interlocked with a starting device that stops the electric motor when the loading chute is removed. The raw material loaded into the tray falls between the movable and fixed knives of the chopping mechanism, is crushed and fed by the movable knives to the unloading hatch. Technical characteristics of the chopper K7-FI2-S : Productivity, kg / hour 6000 ... 7000 Dimensions of raw material pieces, mm 725х725х200 Dimensions of raw materials pieces after grinding, mm - 40x40x30 80% - 70x70x70 10% - 100x70x40 10% Power, kW 22 Occupied area, m2 3.9 Overall dimensions, mm 2800х1395х1445 Weight with / without drive, kg 2785/2065 Warranty 12 months Products are certified < / p>

Power chopper Consists of a frame, a chopping mechanism, a drive. The frame is a welded structure of channels and corners, on which the shredder body and drive are mounted. The shredding mechanism is a set of knives, nine of which are movable and twenty are stationary. The movable knives are fixed on the shaft with dowels so that their outer cutting edges form a discontinuous helical line. Fixed blades are bolted to the body. The shaft rotates in four radial bearings installed in the shredder housing. The axial load that occurs during operation is taken up by the thrust bearing. The shredder housing is a cast split structure, both halves of which (upper and lower) are bolted. The body is closed with an apron. The drive includes an electric motor and a gearbox, interconnected by a coupling. A loading chute is installed in the upper part of the body, interlocked with a starting device that stops the electric motor when the loading chute is removed. The raw material loaded into the tray falls between the movable and fixed knives of the chopping mechanism, is crushed and fed by the movable knives to the unloading hatch. Technical characteristics of the chopper K7-FI2-S : Productivity, kg / hour 6000 ... 7000 Dimensions of raw material pieces, mm 725х725х200 Dimensions of raw materials pieces after grinding, mm - 40x40x30 80% - 70x70x70 10% - 100x70x40 10% Power, kW 22 Occupied area, m2 3.9 Overall dimensions, mm 2800х1395х1445 Weight with / without drive, kg 2785/2065 Warranty 12 months Products are certified < / p>

Применяется в конвейерной линии для первичной обработки свиней и устанавливается в убойном цехе мясокомбината.Представляет собой печь туннельного проходного типа, по оси которой расположен путь подвесного конвейера. Боковые стенки туннеля выполнены из кирпичной кладки. Внутренние поверхности стен обмурованы огнеупорным кирпичом.Установка работает на природном газе, подаваемом к горелкам, расположенным по обеим сторонам внутри тоннеля. Горелки представляют собой вертикальные трубки, к которым в определенном порядке приварены форсунки. При опалке туш свиней в шкуре газ подается во все горелки. Заданная температура внутри печи поддерживается автоматически.Технические характеристики:Производительность, туш/час 240Температура опалки, ºС 700Максимальная длительность опалки, с 45Давление газа, Мпа (кгс/см²) 0,019 (0,22)Расход газа, м³/ч 180Температура воды, ºС 10 … 15Расход воды, м³/ч 1,2 Скорость конвейера (максимальная), м/мин 2,8Габаритные размеры, мм- длина 3310- ширина 3215- высота 4080Масса металлоконструкций, кг 1676

The electric cattle drive "Tamer EPS-2012" is designed for driving livestock at meat processing enterprises (slaughterhouses, stock depots, loading and unloading areas, livestock farms, farms and private farms). The tamer EPS-2012 is a modern device, which in its technical characteristics is not inferior to imported counterparts, and in some cases surpasses them. The use of the device allows you to avoid stress and injuries in animals associated with the operations of their movement, greatly simplifying the process. The design of the electric drive of the Tamer EPS-2012 brand is a rubberized dust-, moisture-, shock-protected body with an electronic unit and batteries built into it. On the side wall of the case there is an on / off button. When you press it, the power from the batteries is transmitted to the electronic circuit, where the voltage rises to the required one. Unlike similar devices, the EPS-2012 Tamer has a shock-resistant rubberized case, reliably protected from moisture and dirt, which greatly simplifies operation in places where livestock are kept. Also, the design of the pusher is specially modified taking into account the Russian climatic features. During the development and testing process, many drawbacks were excluded, such as oxidation and jamming of contacts, breakdown of the case, electric shock to the operator, depressurization of the battery compartment, rapid discharge of the battery, etc., which are often found in the drive cars of other brands Picador, Kawe, Magic Shock. In addition, the device can operate with power from both conventional batteries and rechargeable batteries (not included in the delivery set). An extended warranty is provided for the cattle drover EPS-2012 tamer. Specifications: High ripple voltage at the electrodes, no more than 950 V Frequency ~ 1 kHz < / p> Battery power supply type D (LR20, R20) 2x1.5 V Current consumed from the power supply, no more than 600 mA Duration of operation 1000-1500 switchings * * - with a pulse duration of 1-3 s Overall dimensions: Diameter 68 mm Length 220 mm Weight 0.7 kg Scope of delivery: Cattle drover Tamer EPS-2012 1 pc. Passport and technical description 1 pc. < / p> Electric circuit 1 pc. Battery type D (LR20, R20) 2 pcs.

The Pastukh-U electric cattle drive is intended for use in agriculture (collective farms, state farms, experimental livestock stations, farms) and meat processing enterprises (cattle reception and delivery points, slaughterhouses, meat processing plants, etc.) different types of livestock. The elongated drive body is especially effective when handling cattle. The Pastukh-U electric drive is a modern device that does not cause stress or injury to animals. The advantages of the "Pastukh" drive are a gentle mode of operation in which animals do not get injured, low cost, the ability to recharge from a household network. < br> The kit includes a charger that connects to the 220V network and charges the drive through the adapter. Specifications: Length of the drive, 800 mm Voltage on the electrodes, V 7000 Power supply, Four batteries D -0.55С at 1.5 V Action time until the next charge, h about 8 Diameter, mm 40 Weight, kg 0.65 Duration of operation of one set of batteries with the duration of each pulse 1 - 1.5 sec, inclusions 1000, 1500 For pigs and small cattle it is advisable to use the "Pastukh" drive, and for cattle, the "Pastukh-U" drive with an extended handle. Delivery set 1. Electric drive Pastukh-U (Shepherd) for cattle 1 pc. 2. Passport and technical description 1 copy. 3. Rechargeable battery D 0.55S 4 pcs. 4. Charger 1 pc. 5. Electric circuit 1 copy Battery charging ATTENTION! CHARGE ONLY AFTER A FULL DISCHARGE OF BATTERIES. Connect the electric drive to the charger through the socket, plug the charger into the mains. In this case, the signal LED should light up. A fully discharged battery is charged within 10 hours. Charging is carried out at an ambient temperature of 18 to 30 ° C. The electric drive is supplied with semi-discharged batteries, so before the first use it is recommended to charge the batteries within 5 hours. CHARGER TECHNICAL DATA Maximum load current, A 0.55 Output voltage, V 7 ± 1.2 Supply voltage, V 220 ± 22 Weight, kg (no more) 0.5 Number of simultaneously charged batteries, pcs ... 4 Dimensions, mm 61x58x86 ATTENTION! IT IS STRICTLY FORBIDDEN TO OPEN THE CASE! TO PREVENT ELECTRIC SHOCK, DO NOT TOUCH THE ELECTRODES WHILE THE DEVICE IS TURNED ON! hands of the driving wheel electrodes. Do not repair and disassemble the driving wheel if there are power sources in it. Operation safety is ensured by the use of plastic parts that structurally form the outer surfaces of the electric drive. Operation manual Before starting work, make sure in the operability of the drive, when the power button is pressed, the electric drive should emit a high-frequency sound. If there is no sound, charge the battery. When working, press the power button only when directly touching the animal's body. Do not drop the electric drive and hit it. Do not allow the space between the electrodes to become dirty. At the end of each work shift, remove dirt from the body and electrodes of the drive. When working with an electric drive in winter, at the end of each work shift, place the drive in a dry place (heated room) to restore the power supply. At temperatures below minus 25 ° C, it is recommended to use the electric drive for no more than two hours, as the batteries may fail. To restore the drive, it should be kept for at least 8 hours in a dry, heated room. Store between work the electric drive in a dry place without ammonia vapors. In the summer, do not leave the drive in direct sunlight to avoid overheating of the plastic parts. The drive can become unusable if used at temperatures above 85 ° C.

The OSA electric drive is intended for driving pigs and other types of livestock at meat processing enterprises (slaughterhouses, mobile slaughterhouses, farms, etc.) during cattle pre-slaughtering, during pre-slaughter maintenance. Has a lkasic plastic complex. Power supply from batteries or accumulators. Specifications: Output voltage, V 3000-5000 Power supply 4 batteries, 1.2 V / 0.7 A.h each (type AA) Dimensions, mm length - 820 diameter - 40 Weight, g 800 Number of starts without recharging, duration 1 s 4000-5000